• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170

  • 6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170
  • 6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170
  • 6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170
  • 6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170
  • 6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170
  • 6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170
  • 6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170
  • 6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170
  • 6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170
  • 6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170

6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170

category

excavator

6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170 Technical information

  • 1.375 in
  • Straight w/ Key
  • 3525V
  • 3 7/8 in
  • Buna-N
  • 1800
  • N/A
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • N/A
  • 1800
  • 1800
  • N/A
  • 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
  • 3525V25A12-86AA22R
  • 2500
  • 2500
  • 18
  • 37.5
  • N/A
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 1 in Code 61
  • 1 1/4 in Code 61
  • 2.5
  • 4.9

6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170 Products and services

 

SAA4D95LE-3 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC110-7Pressure Port Size, Shaft End:76.0 LB; Pressure Port Size, Cover End:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Shaft End Pressure [Max:3525V25A12-86AA22R; Minor Diameter [Min:3; Shaft Key:Flange; Seal Material:5/16 in; Major Diameter [Max:Standard Pilot; Shaft Type:1.375 in; Shaft Length:Straight w/ Key; Pump Series:3525V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-86AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
high quality carrier roller EX120-2 for Hitachi excavator undercarriage partsShaft End RPM [Max:76.0 LB; Major Diameter [Min:Flange Mount; Seal Material:Right Hand (CW); Major Diameter [Max:3525V25A12-86AA22R; Cover End Pressure [Max:3; Rotation:Flange; GPM @ 1,800 rpm, Cover End:5/16 in; Shaft Seal Type:Standard Pilot; Cover End RPM [Max:1.375 in; Port Type:Straight w/ Key; Pump Series:3525V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-86AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
Oil radiator R996B water radiator for Liebherr excavator partsSeal Material:76.0 LB; Shaft End Flow @ RPM:Flange Mount; Weight:Right Hand (CW); Shaft Dia.:3525V25A12-86AA22R; Manufacturer Part No.:3; Model No.:Flange; Port Orientation - Shaft End:5/16 in; Cover End RPM [Max:Standard Pilot; Shaft End RPM [Max:1.375 in; Displacement Cover End (cu in/revolution):Straight w/ Key; Pump Series:3525V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-86AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
Oil radiator SK850LC water radiator for kobelco excavator partsPressure Port Size, Cover End:76.0 LB; Minor Diameter [Max:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Port Type:3525V25A12-86AA22R; Shaft Dia.:3; Port Size:Flange; Cover End Pressure [Max:5/16 in; Major Diameter [Min:Standard Pilot; Controlled Flow Rate:1.375 in; Pressure Port Size, Shaft End:Straight w/ Key; Pump Series:3525V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-86AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
S6D155 Starter Motor Starting Motor 600-813-4812 for Komatsu Bulldozer D155 D355Shaft Key:76.0 LB; Cover End RPM [Max:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Displacement Cover End (cu in/revolution):3525V25A12-86AA22R; Pressure Port Size, Shaft End:3; Manufacturer Part No.:Flange; Shaft End RPM [Max:5/16 in; Weight:Standard Pilot; Shaft Dia.:1.375 in; Relief Valve Setting:Straight w/ Key; Pump Series:3525V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-86AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
Oil radiator R225LC-7 water radiator for Hyundai excavator partsShaft Dia.:76.0 LB; Shaft End Flow @ RPM:Flange Mount; Mounting Flange:Right Hand (CW); Relief Valve Setting:3525V25A12-86AA22R; Spline Description:3; Shaft Length:Flange; Major Diameter [Min:5/16 in; Cover End RPM [Max:Standard Pilot; Displacement Shaft End (cu in/revolution):1.375 in; Weight:Straight w/ Key; Pump Series:3525V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-86AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
DE12T1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH360-5Minor Diameter [Min:76.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Mounting:Right Hand (CW); Shaft Type:3525V25A12-86AA22R; Major Diameter [Max:3; Port Size:Flange; Shaft Key:5/16 in; Mounting Flange:Standard Pilot; Manufacturer Part No.:1.375 in; GPM @ 1,800 rpm, Cover End:Straight w/ Key; Pump Series:3525V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-86AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
Oil radiator A312 water radiator for Liebherr excavator partsSeal Material:76.0 LB; Shaft Type:Flange Mount; Port Orientation - Cover End:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:3525V25A12-86AA22R; Shaft End Pressure [Max:3; Weight:Flange; Port Size:5/16 in; Shaft Seal Type:Standard Pilot; Shaft End RPM [Max:1.375 in; Shaft Length:Straight w/ Key; Pump Series:3525V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-86AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
Hydraulic Main Pump For Hitachi Excavator ZX55 and Spare PartsPort Type:76.0 LB; Shaft End RPM [Max:Flange Mount; Shaft Length:Right Hand (CW); Spline Description:3525V25A12-86AA22R; Integral Valve Configuration:3; Minor Diameter [Min:Flange; Mounting Flange:5/16 in; Mounting:Standard Pilot; GPM @ 1,800 rpm, Cover End:1.375 in; Port Size:Straight w/ Key; Pump Series:3525V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-86AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
Oil radiator ZX870H BE-3 water radiator for hitaichi excavator partsModel No.:76.0 LB; Mounting:Flange Mount; Controlled Flow Rate:Right Hand (CW); Cover End RPM [Max:3525V25A12-86AA22R; Major Diameter [Min:3; Max. RPM [Max:Flange; Mounting Flange:5/16 in; Shaft Type:Standard Pilot; Port Size:1.375 in; Rotation:Straight w/ Key; Pump Series:3525V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-86AA22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;

 

 

6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed 6153-K1-9900 Engine Gasket Kit for Komatsu Engine 6D95 6D102 6D107 6D108 6D114 6D125 6D140 6D155 6D170 Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us