• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts

  • high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts
  • high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts
  • high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts
  • high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts
  • high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts
  • high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts
  • high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts
  • high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts
  • high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts
  • high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts

high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts

category

excavator

high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts Technical information

  • 1.375 in
  • 14 Tooth Splined
  • 3525V
  • 2.3125 in
  • Buna-N
  • 1800
  • 1.055 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 1800
  • 1800
  • N/A
  • 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
  • 1.25 in
  • 1.247 in
  • 1.06 in
  • 1.05 in
  • N/A
  • 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
  • 3525V25A17-11CC22R
  • 2500
  • 2500
  • 25.5
  • 37.5
  • N/A
  • Outlet 45° CW from Inlet
  • Outlet Inline w/Inlet
  • 1 in Code 61
  • 1 1/4 in Code 61
  • 3.4
  • 4.9

high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts Products and services

 

high quality excavator top carrier roller EX110-5 for Hitachi excavator undercarriage partsCover End Flow @ RPM:76.0 LB; Minor Diameter [Min:Flange Mount; Max. RPM [Max:Right Hand (CW); Port Type:3525V25A17-11CC22R; Shaft End Pressure [Max:3; Cover End Pressure [Max:Flange; Controlled Flow Rate:N/A; Minor Diameter [Max:Standard Pilot; Port Size:1.375 in; Shaft End Flow @ RPM:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-11CC22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9;
DE12T1 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH360-5Shaft Seal Type:76.0 LB; Manufacturer Part No.:Flange Mount; Integral Valve Configuration:Right Hand (CW); Cover End Flow @ RPM:3525V25A17-11CC22R; Shaft Dia.:3; Minor Diameter [Max:Flange; Weight:N/A; Mounting:Standard Pilot; GPM @ 1,800 rpm, Cover End:1.375 in; Controlled Flow Rate:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-11CC22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9;
6DS70 Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD400GMajor Diameter [Max:76.0 LB; Port Size:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Max. RPM [Max:3525V25A17-11CC22R; Shaft End Pressure [Max:3; Minor Diameter:Flange; Pilot Type:N/A; Controlled Flow Rate:Standard Pilot; Major Diameter [Min:1.375 in; Cover End RPM [Max:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-11CC22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9;
D4DEAE1 Engine Cylinder Liner Kit Piston Piston Ring for Volvo Excavator EC140BMajor Diameter [Max:76.0 LB; Spline Description:Flange Mount; Minor Diameter [Max:Right Hand (CW); Weight:3525V25A17-11CC22R; Cover End Pressure [Max:3; Port Orientation - Shaft End:Flange; Cover End Flow @ RPM:N/A; Controlled Flow Rate:Standard Pilot; Pressure Port Size, Cover End:1.375 in; Mounting Flange:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-11CC22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9;
6B5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R260-5Minor Diameter [Max:76.0 LB; Cover End Pressure [Max:Flange Mount; Major Diameter [Max:Right Hand (CW); Max. RPM [Max:3525V25A17-11CC22R; Major Diameter [Min:3; Port Orientation - Shaft End:Flange; Cover End Flow @ RPM:N/A; Port Size:Standard Pilot; Cover End RPM [Max:1.375 in; Shaft Dia.:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-11CC22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9;
Oil radiator 160C water radiator for Takeuchi excavator partsMajor Diameter [Max:76.0 LB; Manufacturer Part No.:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Spline Description:3525V25A17-11CC22R; Pressure Port Size, Shaft End:3; Max. RPM [Max:Flange; Shaft Length:N/A; Mounting:Standard Pilot; Minor Diameter:1.375 in; Pilot Type:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-11CC22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9;
Oil radiator ZX200-3 water radiator for hitaichi excavator partsShaft Dia.:76.0 LB; Shaft End Flow @ RPM:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Spline Description:3525V25A17-11CC22R; Shaft Seal Type:3; Pilot Type:Flange; Pump Series:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Cover End Flow @ RPM:1.375 in; Shaft Key:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-11CC22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9;
6D108 Engine Parts Alternator 600-825-3161 for Komatsu PC300LC-6Max. RPM [Max:76.0 LB; Shaft Dia.:Flange Mount; Seal Material:Right Hand (CW); Shaft Length:3525V25A17-11CC22R; Cover End RPM [Max:3; Minor Diameter:Flange; Controlled Flow Rate:N/A; Port Type:Standard Pilot; GPM @ 1,800 rpm, Cover End:1.375 in; Shaft End RPM [Max:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-11CC22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9;
Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Volvo EC55Shaft Length:76.0 LB; Model No.:Flange Mount; Seal Material:Right Hand (CW); Shaft Key:3525V25A17-11CC22R; Pressure Port Size, Shaft End:3; Rotation:Flange; Cover End Flow @ RPM:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Displacement Shaft End (cu in/revolution):1.375 in; Cover End RPM [Max:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-11CC22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9;
Hydraulic Main Pump For Hitachi Excavator ZX35U-3F and Spare PartsCover End Flow @ RPM:76.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Seal Material:Right Hand (CW); Relief Valve Setting:3525V25A17-11CC22R; Weight:3; Pressure Port Size, Cover End:Flange; Shaft End Flow @ RPM:N/A; Minor Diameter [Max:Standard Pilot; Shaft Seal Type:1.375 in; Pressure Port Size, Shaft End:14 Tooth Splined; Pump Series:3525V; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A17-11CC22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):4.9;

 

 

high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed high quality carrier roller EX120-2 for Hitachi excavator undercarriage parts Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us