• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Relief valve and other valve>Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7

  • Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7
  • Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7
  • Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7
  • Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7
  • Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7
  • Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7
  • Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7
  • Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7
  • Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7
  • Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7

Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7

category

Relief valve and other valve

Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7 Systems

  • 1.25 in
  • 14 Tooth Splined
  • 4525VQ
  • 1 15/16 in
  • Buna-N
  • 2200
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2200
  • 2200
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm
  • 4525VQ42A21-11CC20-LH
  • 3000
  • 2500
  • 31.5
  • 63
  • w/o Integral Valves
  • Outlet 45° CW from Inlet
  • Outlet Inline w/Inlet
  • 1 in Flange
  • 1 1/2 in Flange
  • 4.12
  • 8.46

Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7 Dimensions

 

Competitive factory price excavator hydraulic travel motor parts PC220-7 swing motor partsDisplacement Shaft End (cu in/revolution):101.0 LB; Port Orientation - Cover End:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Cover End Pressure [Max:4525VQ42A21-11CC20-LH; Shaft Key:3 1/2; Spline Description:Flange; Shaft Seal Type:N/A; Pilot Type:Standard Pilot; GPM @ 1,800 rpm, Cover End:1.25 in; Relief Valve Setting:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
PV20 PV21 PV22 PV23 Power Steering Vickers Hydraulic Vane PumpShaft Seal Type:101.0 LB; Shaft End Flow @ RPM:Flange Mount; Mounting Flange:Left Hand (CCW); Port Orientation - Shaft End:4525VQ42A21-11CC20-LH; Pressure Port Size, Shaft End:3 1/2; Port Orientation - Cover End:Flange; Minor Diameter:N/A; Port Type:Standard Pilot; Relief Valve Setting:1.25 in; Seal Material:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
Genuine Quality Excavator Spare Parts 205-70-31274 Bushing for Komatsu PC220-8Port Type:101.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Minor Diameter [Max:Left Hand (CCW); Port Size:4525VQ42A21-11CC20-LH; Mounting Flange:3 1/2; Pressure Port Size, Cover End:Flange; Port Orientation - Shaft End:N/A; Shaft Dia.:Standard Pilot; Shaft Length:1.25 in; Shaft Type:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
OEM Rexroth A4VSO125 Hydraulic pump A4VSO125DR/10R-VKD63NOO,A4VSO125DR pump pressure controlMax. RPM [Max:101.0 LB; Minor Diameter [Min:Flange Mount; Seal Material:Left Hand (CCW); Pilot Type:4525VQ42A21-11CC20-LH; Minor Diameter:3 1/2; Major Diameter [Max:Flange; Integral Valve Configuration:N/A; Port Size:Standard Pilot; Shaft Dia.:1.25 in; Shaft End Flow @ RPM:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
Excavator cylinder head PC60-7 PC130-7 PC200-8 PC240LC-8 PC270-7 PC300-7 PC360-7 PC400-7 PC450-7 engine partsMajor Diameter [Min:101.0 LB; Weight:Flange Mount; Shaft Length:Left Hand (CCW); Port Orientation - Shaft End:4525VQ42A21-11CC20-LH; Model No.:3 1/2; Minor Diameter [Max:Flange; Relief Valve Setting:N/A; Shaft Seal Type:Standard Pilot; Cover End Flow @ RPM:1.25 in; Seal Material:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
High quality PC60 excavator GM09 final drives hydraulic swing travel motor with reduction boxShaft End RPM [Max:101.0 LB; Major Diameter [Min:Flange Mount; Seal Material:Left Hand (CCW); Port Size:4525VQ42A21-11CC20-LH; Manufacturer Part No.:3 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Pressure Port Size, Cover End:N/A; Major Diameter [Max:Standard Pilot; Integral Valve Configuration:1.25 in; Shaft End Flow @ RPM:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
commercial parker hydraulic gear pump cast iron triple pump parker pump,single,tandem,triple ,four unit ,five pumpsMinor Diameter:101.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Port Type:Left Hand (CCW); Mounting:4525VQ42A21-11CC20-LH; Pump Series:3 1/2; Port Orientation - Shaft End:Flange; Displacement Shaft End (cu in/revolution):N/A; Shaft Key:Standard Pilot; Shaft Seal Type:1.25 in; Cover End RPM [Max:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
OEM HPV35 pump parts for PC60 PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFTPump Series:101.0 LB; Minor Diameter [Min:Flange Mount; Shaft Seal Type:Left Hand (CCW); GPM @ 1,800 rpm, Cover End:4525VQ42A21-11CC20-LH; Major Diameter [Max:3 1/2; Port Orientation - Shaft End:Flange; Minor Diameter:N/A; Shaft End RPM [Max:Standard Pilot; Weight:1.25 in; Manufacturer Part No.:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
113-15-00270 Transmission Pump for KOMATSU D31A/P/Q-16Shaft Seal Type:101.0 LB; Shaft Type:Flange Mount; Pump Series:Left Hand (CCW); Max. RPM [Max:4525VQ42A21-11CC20-LH; Model No.:3 1/2; Displacement Shaft End (cu in/revolution):Flange; Displacement Cover End (cu in/revolution):N/A; Minor Diameter [Min:Standard Pilot; Weight:1.25 in; Shaft Dia.:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;
Hot sale For Toshiba SG08 MFB160 excavator swing motor partsRotation:101.0 LB; Major Diameter [Min:Flange Mount; Port Type:Left Hand (CCW); Port Orientation - Shaft End:4525VQ42A21-11CC20-LH; Pump Series:3 1/2; Shaft End RPM [Max:Flange; Mounting Flange:N/A; Pressure Port Size, Cover End:Standard Pilot; Seal Material:1.25 in; Shaft End Flow @ RPM:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ42A21-11CC20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):8.46;

 

 

Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Relief valve and other valve CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7 Also Viewed

  • Hot sale for For Rexroth A2V500 excavator pump parts
  • Hot sale for For Rexroth A2V225 excavator pump parts
  • Hot sale for For Rexroth A2F107 A2VK107 excavator pump parts
  • Hot sale for For Rexroth A2F28 excavator pump parts
  • Hot sale for For Rexroth A2VK28 excavator pump parts
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us