Home>Products>Relief valve and other valve>commercial parker hydraulic gear pump cast iron triple pump parker pump,single,tandem,triple ,four unit ,five pumps
commercial parker hydraulic gear pump cast iron triple pump parker pump,single,tandem,triple ,four unit ,five pumps MODELS
Need a CAD or 3D Model?
commercial parker hydraulic gear pump cast iron triple pump parker pump,single,tandem,triple ,four unit ,five pumps
category
Relief valve and other valve
commercial parker hydraulic gear pump cast iron triple pump parker pump,single,tandem,triple ,four unit ,five pumps SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
commercial parker hydraulic gear pump cast iron triple pump parker pump,single,tandem,triple ,four unit ,five pumps Systems
- 0.875 in
- 13 Tooth Splined
- V2010
- 1 5/16 in
- Double
- Buna-N
- 2500
- 0.728 in
- SAE B, 2 Bolt
- Single Shaft Seal
- 16/32
- 3000
- 2500
- N/A
- 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm
- 0.873 in
- 0.872 in
- 0.734 in
- 0.723 in
- N/A
- 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
- V2010-1F11S5S-11CC12
- 2500
- 2500
- 7.5
- 16.5
- N/A
- Outlet 45° CW from Inlet
- 2.2
- 1/2 in SAE O-Ring
- 3/4 in SAE O-Ring
- 1
commercial parker hydraulic gear pump cast iron triple pump parker pump,single,tandem,triple ,four unit ,five pumps Dimensions
705-11-36000 Steering Pump for KOMATSU D68ESS-12/W120-2 | Minor Diameter:30.0 LB; Shaft Length:Flange Mount; Shaft Type:Right Hand (CW); Seal Material:V2010-1F11S5S-11CC12; GPM @ 1,800 rpm, Shaft End:1.5; Pump Series:Flange; Displacement Shaft End (cu in/revolution):N/A; Shaft End Pressure [Max:N/A; Shaft End RPM [Max:0.875 in; Shaft Dia.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.2; |
705-55-24110 PUMP ASS Y for KOMATSU LW100-1H/1X/LW100 | Major Diameter [Min:30.0 LB; Minor Diameter [Max:Flange Mount; Seal Material:Right Hand (CW); Displacement Cover End (cu in/revolution):V2010-1F11S5S-11CC12; Manufacturer Part No.:1.5; GPM @ 1,800 rpm, Cover End:Flange; Port Type:N/A; Controlled Flow Rate:N/A; Shaft Length:0.875 in; Weight:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.2; |
For Hitachi excavator gear reduction motor Swing Motor ZX60 ZX120 ZX120-6 ZX200 ZX230-6 ZX240-3 ZX250-3 ZX330-3 | Mounting:30.0 LB; Minor Diameter [Max:Flange Mount; Major Diameter [Min:Right Hand (CW); Shaft End Pressure [Max:V2010-1F11S5S-11CC12; Pump Series:1.5; GPM @ 1,800 rpm, Cover End:Flange; Max. RPM [Max:N/A; Integral Valve Configuration:N/A; Port Orientation - Cover End:0.875 in; Minor Diameter [Min:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.2; |
Hot sale for For Rexroth A10VSO63 excavator pump parts | Pressure Port Size, Shaft End:30.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Spline Description:Right Hand (CW); Max. RPM [Max:V2010-1F11S5S-11CC12; Shaft End Flow @ RPM:1.5; GPM @ 1,800 rpm, Shaft End:Flange; Shaft Seal Type:N/A; Minor Diameter [Min:N/A; Pressure Port Size, Cover End:0.875 in; Pump Series:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.2; |
705-51-30290 Power Pump for KOMATSU D155A-3-5 | Mounting Flange:30.0 LB; Cover End Pressure [Max:Flange Mount; Minor Diameter:Right Hand (CW); Shaft End Pressure [Max:V2010-1F11S5S-11CC12; Shaft Key:1.5; Pump Series:Flange; Major Diameter [Min:N/A; Major Diameter [Max:N/A; Spline Description:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.2; |
PC200-8 PC220-8 PC240-8 Fuel Injection Pump 6754-71-1010 | Cover End Pressure [Max:30.0 LB; Minor Diameter [Min:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Manufacturer Part No.:V2010-1F11S5S-11CC12; Pilot Type:1.5; Pressure Port Size, Shaft End:Flange; Minor Diameter:N/A; Mounting:N/A; Shaft End Flow @ RPM:0.875 in; Major Diameter [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.2; |
excavator travel motor PC300-7 Final drive 207-27-00371 PC200-6 pc200-7 PC200-8 PC220-7 PC360-7 | Relief Valve Setting:30.0 LB; Spline Description:Flange Mount; Shaft Type:Right Hand (CW); Mounting:V2010-1F11S5S-11CC12; Rotation:1.5; Major Diameter [Max:Flange; Pilot Type:N/A; Cover End Pressure [Max:N/A; Port Orientation - Shaft End:0.875 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.2; |
Factory price PC60 excavator GM09 final drives hydraulic swing travel motor with reduction box | Weight:30.0 LB; Shaft End Pressure [Max:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Port Size:V2010-1F11S5S-11CC12; Minor Diameter [Max:1.5; Major Diameter [Max:Flange; Relief Valve Setting:N/A; Displacement Cover End (cu in/revolution):N/A; Minor Diameter [Min:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.2; |
Hot sale for caterpillar CAT330B travel motor excavator pump parts | Weight:30.0 LB; Shaft Type:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Mounting:V2010-1F11S5S-11CC12; Port Orientation - Shaft End:1.5; Major Diameter [Min:Flange; Cover End RPM [Max:N/A; Max. RPM [Max:N/A; Shaft Length:0.875 in; Shaft Key:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.2; |
07426-11100 Steering Pump for KOMATSU D80A-8 | Major Diameter [Min:30.0 LB; Model No.:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Cover End Flow @ RPM:V2010-1F11S5S-11CC12; GPM @ 1,800 rpm, Cover End:1.5; Pressure Port Size, Cover End:Flange; Mounting:N/A; Shaft Seal Type:N/A; Shaft Dia.:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S5S-11CC12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1; Displacement Shaft End (cu in/revolution):2.2; |
commercial parker hydraulic gear pump cast iron triple pump parker pump,single,tandem,triple ,four unit ,five pumps Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
commercial parker hydraulic gear pump cast iron triple pump parker pump,single,tandem,triple ,four unit ,five pumps Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Relief valve and other valve CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump