Home>Products>Relief valve and other valve>6738-81-8091
6738-81-8091
category
Relief valve and other valve
6738-81-8091 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
6738-81-8091 Systems
- 0.875 in
- 13 Tooth Splined
- V2010
- 1 5/16 in
- Buna-N
- 2400
- 0.728 in
- SAE B, 2 Bolt
- Single Shaft Seal
- 16/32
- 3000
- 2400
- N/A
- 3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm
- 0.873 in
- 0.872 in
- 0.7335 in
- 0.7225 in
- N/A
- 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
- V2010-1F12S3S-11AA12
- 2500
- 2200
- 4.5
- 18
- N/A
- Outlet 135° CCW from Inlet
- Outlet Opposite Inlet
- 1/2 in SAE O-Ring
- 3/4 in SAE O-Ring
- 0.6
- 2.38
6738-81-8091 Dimensions
Genuine For Kobelco final drive travel motor swing motor SK25 SK30 SK45 SK50UR SK60 SK35 SK75 SK80 SK210 SK220 SK380 SK310 | Pilot Type:30.0 LB; Weight:Flange Mount; Integral Valve Configuration:Right Hand (CW); Shaft Key:V2010-1F12S3S-11AA12; Rotation:1 1/2; Model No.:Flange; Minor Diameter [Min:N/A; Mounting:N/A; GPM @ 1,800 rpm, Cover End:0.875 in; Shaft End Pressure [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7 | Max. RPM [Max:30.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Cover End Flow @ RPM:V2010-1F12S3S-11AA12; Port Orientation - Cover End:1 1/2; Seal Material:Flange; Weight:N/A; Integral Valve Configuration:N/A; Major Diameter [Max:0.875 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
Dakin piston pump RP38C13H-37-30,cast iron rotor hydraulic pumps | Port Size:30.0 LB; Cover End Flow @ RPM:Flange Mount; Mounting:Right Hand (CW); Port Type:V2010-1F12S3S-11AA12; Displacement Cover End (cu in/revolution):1 1/2; Integral Valve Configuration:Flange; Displacement Shaft End (cu in/revolution):N/A; Shaft Key:N/A; GPM @ 1,800 rpm, Shaft End:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
Genuine Quality Excavator Spare Parts 205-70-31274 Bushing for Komatsu PC200-8 | Port Size:30.0 LB; Rotation:Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); Port Type:V2010-1F12S3S-11AA12; GPM @ 1,800 rpm, Cover End:1 1/2; Shaft Dia.:Flange; Weight:N/A; Relief Valve Setting:N/A; Pressure Port Size, Shaft End:0.875 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
rexroth pump parts A11VG50 | Spline Description:30.0 LB; Pilot Type:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Minor Diameter [Max:V2010-1F12S3S-11AA12; Displacement Cover End (cu in/revolution):1 1/2; Cover End Flow @ RPM:Flange; Shaft End Flow @ RPM:N/A; Shaft Seal Type:N/A; Displacement Shaft End (cu in/revolution):0.875 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
Hydraulic Gear Pump 07421-71401 | Mounting Flange:30.0 LB; Weight:Flange Mount; Shaft Dia.:Right Hand (CW); Minor Diameter [Max:V2010-1F12S3S-11AA12; Pilot Type:1 1/2; Integral Valve Configuration:Flange; Max. RPM [Max:N/A; Minor Diameter [Min:N/A; Shaft Length:0.875 in; Port Orientation - Cover End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
High quality PC200-6 oil cooler 20Y-03-21720 heat sink radiator excavator parts | Max. RPM [Max:30.0 LB; Port Size:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Seal Material:V2010-1F12S3S-11AA12; Shaft Seal Type:1 1/2; Shaft Type:Flange; Shaft End Flow @ RPM:N/A; Pressure Port Size, Shaft End:N/A; Displacement Cover End (cu in/revolution):0.875 in; Pump Series:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
Excavator transmission overhaul kits reduction gearbox final drive PC20 PC50 PC130 PC200 PC220 PC300 PC400 | Seal Material:30.0 LB; Port Size:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Mounting Flange:V2010-1F12S3S-11AA12; Displacement Shaft End (cu in/revolution):1 1/2; Rotation:Flange; GPM @ 1,800 rpm, Cover End:N/A; Pilot Type:N/A; Controlled Flow Rate:0.875 in; Shaft End Flow @ RPM:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
Hot sale For Hyundai 300-5 excavator travel motor parts | Mounting:30.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Shaft Key:V2010-1F12S3S-11AA12; Shaft End Flow @ RPM:1 1/2; GPM @ 1,800 rpm, Cover End:Flange; Pilot Type:N/A; Cover End Flow @ RPM:N/A; Minor Diameter:0.875 in; Rotation:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
OEM price PC200-6 oil cooler 20Y-03-21720 heat sink radiator excavator parts | Shaft Seal Type:30.0 LB; Rotation:Flange Mount; Shaft Length:Right Hand (CW); Weight:V2010-1F12S3S-11AA12; Major Diameter [Max:1 1/2; Mounting Flange:Flange; Port Orientation - Shaft End:N/A; Pressure Port Size, Shaft End:N/A; GPM @ 1,800 rpm, Cover End:0.875 in; Minor Diameter [Min:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
6738-81-8091 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
6738-81-8091 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Relief valve and other valve CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump