• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Relief valve and other valve>PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7

  • PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7
  • PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7
  • PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7
  • PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7
  • PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7
  • PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7
  • PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7
  • PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7
  • PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7
  • PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7

PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7

category

Relief valve and other valve

PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7 Systems

  • Standard Pilot
  • 0.875 in
  • Straight w/ Key
  • 2520V
  • 2.32 in
  • Double
  • Buna-N
  • 1800
  • N/A
  • Outlet 45° CW from Inlet
  • 3/4 in Code 61
  • Outlet Inline w/Inlet
  • Motor
  • 1800
  • 1800
  • 1.7
  • 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • 1 in Code 61
  • 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
  • 2520V-17A8-1CC22R
  • 4 Bolt Flange Per SAE J518C W/ English Threads
  • N/A
  • 02-102534
  • 3000
  • 3.4
  • 12
  • 25.5
  • 45° CW From Inlet Port

PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7 Dimensions

 

Swing bearing for excavators PC40 PC60 PW60Displacement Cover End (cu in/revolution):45.0 LB; Max. RPM [Max:Flange Mount; Mounting Flange:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:2520V-17A8-1CC22R; Rotation:2.5; Relief Valve Setting:Flange; Major Diameter [Min:1/4 in; Seal Material:22; Shaft End Flow @ RPM:Standard Pilot; Shaft Type:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-17A8-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102508; Shaft End Cartridge Kit:02-102534; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):3.4;
705-52-21250 Hydraulic Pump for KOMATSU GD675Port Type:45.0 LB; Pressure Port Size, Cover End:Flange Mount; Pump Series:Right Hand (CW); Pressure Port Size, Shaft End:2520V-17A8-1CC22R; GPM @ 1,800 rpm, Cover End:2.5; Displacement Shaft End (cu in/revolution):Flange; Shaft End RPM [Max:1/4 in; Port Orientation - Shaft End:22; Mounting Flange:Standard Pilot; Shaft Length:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-17A8-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102508; Shaft End Cartridge Kit:02-102534; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):3.4;
Genuine Quality Excavator Spare Parts 205-70-32361 Bushing for Komatsu PC200-7Shaft Seal Type:45.0 LB; Max. RPM [Max:Flange Mount; Major Diameter [Max:Right Hand (CW); Pressure Port Size, Shaft End:2520V-17A8-1CC22R; Shaft Key:2.5; Controlled Flow Rate:Flange; Displacement Cover End (cu in/revolution):1/4 in; Seal Material:22; Mounting:Standard Pilot; Manufacturer Part No.:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-17A8-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102508; Shaft End Cartridge Kit:02-102534; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):3.4;
kawasaki rexroth uchida hitachi excavator hydraulic pumpPressure Port Size, Shaft End:45.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Relief Valve Setting:Right Hand (CW); Minor Diameter [Max:2520V-17A8-1CC22R; Cover End Pressure [Max:2.5; Cover End RPM [Max:Flange; Shaft Key:1/4 in; GPM @ 1,800 rpm, Shaft End:22; Max. RPM [Max:Standard Pilot; Minor Diameter:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-17A8-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102508; Shaft End Cartridge Kit:02-102534; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):3.4;
Variable piston rexroth main hydraulic pump a10vso28 a10vso60 a10vso71 a10vso100 a10vso140 a10vso250GPM @ 1,800 rpm, Shaft End:45.0 LB; Cover End Flow @ RPM:Flange Mount; Major Diameter [Min:Right Hand (CW); Spline Description:2520V-17A8-1CC22R; Controlled Flow Rate:2.5; Mounting:Flange; Pressure Port Size, Cover End:1/4 in; Displacement Shaft End (cu in/revolution):22; Shaft End Pressure [Max:Standard Pilot; Rotation:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-17A8-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102508; Shaft End Cartridge Kit:02-102534; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):3.4;
Factory price PC60 excavator GM09 final drives hydraulic swing travel motor with reduction boxShaft End RPM [Max:45.0 LB; Mounting Flange:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Minor Diameter:2520V-17A8-1CC22R; Model No.:2.5; Manufacturer Part No.:Flange; GPM @ 1,800 rpm, Shaft End:1/4 in; Shaft Seal Type:22; Integral Valve Configuration:Standard Pilot; Minor Diameter [Min:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-17A8-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102508; Shaft End Cartridge Kit:02-102534; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):3.4;
Genuine Quality Excavator Spare Parts 207-70-72341 Bushing for Komatsu PC360-7Spline Description:45.0 LB; Pilot Type:Flange Mount; Shaft Key:Right Hand (CW); Max. RPM [Max:2520V-17A8-1CC22R; Shaft End Pressure [Max:2.5; Shaft Length:Flange; Shaft End Flow @ RPM:1/4 in; Port Orientation - Cover End:22; Pressure Port Size, Cover End:Standard Pilot; Seal Material:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-17A8-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102508; Shaft End Cartridge Kit:02-102534; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):3.4;
PC130-8 turbocharger 6271-81-8100Shaft Dia.:45.0 LB; Shaft Length:Flange Mount; Spline Description:Right Hand (CW); Shaft End Pressure [Max:2520V-17A8-1CC22R; Shaft End Flow @ RPM:2.5; Port Orientation - Shaft End:Flange; Cover End Pressure [Max:1/4 in; Relief Valve Setting:22; Pump Series:Standard Pilot; Minor Diameter:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-17A8-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102508; Shaft End Cartridge Kit:02-102534; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):3.4;
Competitive factory price excavator hydraulic travel motor parts PC200-6 swing motor partsPilot Type:45.0 LB; Minor Diameter [Min:Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); Displacement Shaft End (cu in/revolution):2520V-17A8-1CC22R; Minor Diameter [Max:2.5; Shaft End Flow @ RPM:Flange; Manufacturer Part No.:1/4 in; Minor Diameter:22; Displacement Cover End (cu in/revolution):Standard Pilot; Shaft Length:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-17A8-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102508; Shaft End Cartridge Kit:02-102534; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):3.4;
705-53-42000 Trans Lubr Lev for KOMATSU WA600-3Max. RPM [Max:45.0 LB; Mounting:Flange Mount; Integral Valve Configuration:Right Hand (CW); Shaft Type:2520V-17A8-1CC22R; Relief Valve Setting:2.5; Rotation:Flange; Shaft Seal Type:1/4 in; Displacement Cover End (cu in/revolution):22; Pressure Port Size, Shaft End:Standard Pilot; Minor Diameter [Max:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V-17A8-1CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Cartridge Kit:02-102508; Shaft End Cartridge Kit:02-102534; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):3.4;

 

 

PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Relief valve and other valve CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed PC300-7 diesel pump 6743711131 SAA6D114E engine fuel injection pump pc300lc-7 Also Viewed

  • Hot sale for For Rexroth A2V500 excavator pump parts
  • Hot sale for For Rexroth A2V225 excavator pump parts
  • Hot sale for For Rexroth A2F107 A2VK107 excavator pump parts
  • Hot sale for For Rexroth A2F28 excavator pump parts
  • Hot sale for For Rexroth A2VK28 excavator pump parts
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us