• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Relief valve and other valve>OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT

  • OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT
  • OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT

OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT

category

Relief valve and other valve

OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Systems

  • 1.09 in
  • 13 Tooth Splined
  • 2520V
  • 1.75 in
  • Buna-N
  • 1800
  • 0.7285 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 1800
  • 1800
  • N/A
  • 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.734 in
  • 0.723 in
  • N/A
  • 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
  • 2520V12A8-11AA22L
  • 3000
  • 2500
  • 12
  • 18
  • N/A
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 3/4 in Code 61
  • 1 in Code 61
  • 1.7
  • 2.5

OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Dimensions

 

Mini Excavator Hydraulic PumpSeal Material:45.0 LB; Shaft Key:Flange Mount; Cover End Pressure [Max:Left Hand (CCW); Shaft End Pressure [Max:2520V12A8-11AA22L; GPM @ 1,800 rpm, Shaft End:2 1/2; Port Size:Flange; Major Diameter [Min:N/A; Shaft End Flow @ RPM:Standard Pilot; Controlled Flow Rate:1.09 in; Minor Diameter [Min:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
Factory price Nachi pump,PVD-2B-32L,PVD-2B-40P,PVD-2B-34L,PVD-2B-36L,PVD-2B-38,PVD-2B-40,PVD-2B-42,PVD-00B-15,PVD-1B,PVD-3B-60Integral Valve Configuration:45.0 LB; Relief Valve Setting:Flange Mount; Cover End Flow @ RPM:Left Hand (CCW); Shaft End RPM [Max:2520V12A8-11AA22L; Port Size:2 1/2; Pump Series:Flange; Port Orientation - Cover End:N/A; Port Type:Standard Pilot; Shaft End Flow @ RPM:1.09 in; Shaft Seal Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
hitachi excavator main hydraulic pumpModel No.:45.0 LB; Major Diameter [Max:Flange Mount; Spline Description:Left Hand (CCW); Port Orientation - Cover End:2520V12A8-11AA22L; Manufacturer Part No.:2 1/2; Cover End Pressure [Max:Flange; Shaft End RPM [Max:N/A; Integral Valve Configuration:Standard Pilot; Shaft Key:1.09 in; Shaft End Flow @ RPM:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
PVD-1B-32P PVD-3B-54P Nachi Pistion Pump for mini excavatorPressure Port Size, Shaft End:45.0 LB; Shaft End Pressure [Max:Flange Mount; Major Diameter [Max:Left Hand (CCW); Shaft Seal Type:2520V12A8-11AA22L; Spline Description:2 1/2; Shaft Dia.:Flange; Pilot Type:N/A; Model No.:Standard Pilot; Major Diameter [Min:1.09 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
07438-66101 hoist pump for KOMATSU HD180-4Shaft End Flow @ RPM:45.0 LB; Shaft End RPM [Max:Flange Mount; Cover End Pressure [Max:Left Hand (CCW); Weight:2520V12A8-11AA22L; Major Diameter [Max:2 1/2; Relief Valve Setting:Flange; Cover End Flow @ RPM:N/A; Pump Series:Standard Pilot; Integral Valve Configuration:1.09 in; Mounting Flange:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
Genuine Quality Excavator Spare Parts 207-70-73250 Bushing for Komatsu PC300-7Port Size:45.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Pump Series:Left Hand (CCW); Controlled Flow Rate:2520V12A8-11AA22L; Port Orientation - Cover End:2 1/2; Minor Diameter [Max:Flange; Shaft End Pressure [Max:N/A; Spline Description:Standard Pilot; GPM @ 1,800 rpm, Shaft End:1.09 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
pc360-7 fuel pump 6743-71-1131 oil pump injection pumpControlled Flow Rate:45.0 LB; Cover End Pressure [Max:Flange Mount; Seal Material:Left Hand (CCW); Major Diameter [Min:2520V12A8-11AA22L; Rotation:2 1/2; Displacement Cover End (cu in/revolution):Flange; Integral Valve Configuration:N/A; Relief Valve Setting:Standard Pilot; Shaft Key:1.09 in; Shaft End Pressure [Max:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
Genuine Quality Excavator Spare Parts 207-70-D9860 Bushing for Komatsu PC360-7Shaft End RPM [Max:45.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Max. RPM [Max:Left Hand (CCW); Mounting Flange:2520V12A8-11AA22L; Shaft Key:2 1/2; Controlled Flow Rate:Flange; Cover End Pressure [Max:N/A; Shaft Seal Type:Standard Pilot; Minor Diameter [Min:1.09 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
Hot sale For Kawasaki MX150 excavator swing motor partsCover End Pressure [Max:45.0 LB; Seal Material:Flange Mount; Mounting Flange:Left Hand (CCW); Pilot Type:2520V12A8-11AA22L; Minor Diameter:2 1/2; Controlled Flow Rate:Flange; Pressure Port Size, Cover End:N/A; Max. RPM [Max:Standard Pilot; GPM @ 1,800 rpm, Shaft End:1.09 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
705-52-31210 PUMP ASS Y for KOMATSU HM350-1Minor Diameter:45.0 LB; Shaft End Pressure [Max:Flange Mount; Seal Material:Left Hand (CCW); Pressure Port Size, Cover End:2520V12A8-11AA22L; Pump Series:2 1/2; Relief Valve Setting:Flange; Cover End RPM [Max:N/A; Mounting:Standard Pilot; Port Orientation - Cover End:1.09 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:2520V; Shaft Length:1.75 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11AA22L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;

 

 

OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Relief valve and other valve CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed OEM PC200-6 swing motor parts PISTON SHOE cylinder BLOCK VALVE PLATE DRIVE SHAFT Also Viewed

  • Hot sale for For Rexroth A2V500 excavator pump parts
  • Hot sale for For Rexroth A2V225 excavator pump parts
  • Hot sale for For Rexroth A2F107 A2VK107 excavator pump parts
  • Hot sale for For Rexroth A2F28 excavator pump parts
  • Hot sale for For Rexroth A2VK28 excavator pump parts
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us