Home>Products>Tokimec Vane Pump>Rexroth A2FM10 RETAINER PLATE A2FM10 DISC SPRING A2FM10 SOCKET BOLT A2FM10 OIL SEAL
Rexroth A2FM10 RETAINER PLATE A2FM10 DISC SPRING A2FM10 SOCKET BOLT A2FM10 OIL SEAL MODELS
Need a CAD or 3D Model?
Rexroth A2FM10 RETAINER PLATE A2FM10 DISC SPRING A2FM10 SOCKET BOLT A2FM10 OIL SEAL
category
Tokimec Vane Pump
Rexroth A2FM10 RETAINER PLATE A2FM10 DISC SPRING A2FM10 SOCKET BOLT A2FM10 OIL SEAL SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Rexroth A2FM10 RETAINER PLATE A2FM10 DISC SPRING A2FM10 SOCKET BOLT A2FM10 OIL SEAL Systems
- #8 SAE O-Ring Port - Bottom (Top Plugged)
- 2 in 4-Bolt Flange/Code 61
- N/A
- 14 Tooth Splined
- 26 gpm @ 1800 rpm
- 1 in 4-Bolt Flange/Code 61
- Pressure Compensator
- 1.89 in
- Side Port
- Viton
- None
- 26
- SAE C, 4 Bolt
- Q250 Valve Plate, No Case To Inlet Check Valve
- 14 Tooth Splined
- No Auxiliary Mounting Features
- 3.5
- None
- None
- 3625
- 957-1,073 psi
- Standard Displacement
Rexroth A2FM10 RETAINER PLATE A2FM10 DISC SPRING A2FM10 SOCKET BOLT A2FM10 OIL SEAL Dimensions
VICKERS PVH98 PISTON SHOE PVH98 CYLINDER BLOCK PVH98 RETAINER PLATE PVH98 VALVE PLATE PVH98 RETAINER | Weight:N/A; Minor Diameter:N/A; Shaft End Pressure [Max:Piston Pumps; Integral Valve Configuration:PVH; Pilot Type:0.0 LB; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Spline Description:Flange; Seal Material:Variable Displacement Open Circuit; Pump Series:#8 SAE O-Ring Port - Bottom (Top Plugged); Shaft Length:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Rexroth A2FE16 RING PISTON A2FE16 RING A2FE16 CYLINDER BLOCK A2FE16 VALVE PLATE A2FE16 DRIVE SHAFT | Pilot Type:N/A; Shaft End Flow @ RPM:N/A; Minor Diameter [Max:Piston Pumps; GPM @ 1,800 rpm, Shaft End:PVH; Mounting:0.0 LB; Controlled Flow Rate:Right Hand (CW); Rotation:Flange; Shaft Seal Type:Variable Displacement Open Circuit; Seal Material:#8 SAE O-Ring Port - Bottom (Top Plugged); Shaft End RPM [Max:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
HPV132 PC400-6 PISTON SHOE PC400-6 CYLINDER BLOCK PC400-6 VALVE PLATE PC400-6 RETAINER PLATE | Port Orientation - Shaft End:N/A; Pump Series:N/A; Mounting Flange:Piston Pumps; Cover End Flow @ RPM:PVH; Controlled Flow Rate:0.0 LB; Cover End Pressure [Max:Right Hand (CW); Major Diameter [Max:Flange; Shaft Type:Variable Displacement Open Circuit; Max. RPM [Max:#8 SAE O-Ring Port - Bottom (Top Plugged); Port Size:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
TA1515 MAIN CENTRE BLOCK TA1515 PISTON SHOE TA1515 RETAINER PLATE TA1515 BALL GUIDE TA1515 GASKET | Integral Valve Configuration:N/A; Port Size:N/A; Shaft Dia.:Piston Pumps; Manufacturer Part No.:PVH; Displacement Shaft End (cu in/revolution):0.0 LB; Controlled Flow Rate:Right Hand (CW); Seal Material:Flange; Displacement Cover End (cu in/revolution):Variable Displacement Open Circuit; Relief Valve Setting:#8 SAE O-Ring Port - Bottom (Top Plugged); Shaft Key:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Rexroth A10VO45 A10VSO45 SHAFT OIL SEAL A10VSO45 METARIS A10VSO45 HEAD BLOCK A10VSO45 SEAL KIT A10VSO45 SPRING SPL | Manufacturer Part No.:N/A; Shaft End Flow @ RPM:N/A; Cover End RPM [Max:Piston Pumps; Integral Valve Configuration:PVH; Cover End Pressure [Max:0.0 LB; Rotation:Right Hand (CW); Max. RPM [Max:Flange; Shaft Seal Type:Variable Displacement Open Circuit; GPM @ 1,800 rpm, Cover End:#8 SAE O-Ring Port - Bottom (Top Plugged); GPM @ 1,800 rpm, Shaft End:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
REXROTH A4VG40 BALL GUIDE A4VG40 DRIVE SHAFT A4VG40 SWASH PLATE A4VG40 CAM ROCKER | Spline Description:N/A; Minor Diameter:N/A; Minor Diameter [Max:Piston Pumps; GPM @ 1,800 rpm, Shaft End:PVH; Shaft Key:0.0 LB; Pilot Type:Right Hand (CW); Major Diameter [Min:Flange; Cover End Flow @ RPM:Variable Displacement Open Circuit; Shaft Length:#8 SAE O-Ring Port - Bottom (Top Plugged); Shaft Type:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Rexroth A11VO190 SADDLE BEARING A11VO190 BEARING SEAT A11VO190 RETAINER A11VO190 SHOE PLATE | Port Orientation - Cover End:N/A; Rotation:N/A; Minor Diameter [Max:Piston Pumps; Shaft End Flow @ RPM:PVH; Port Size:0.0 LB; Major Diameter [Max:Right Hand (CW); Mounting:Flange; Port Orientation - Shaft End:Variable Displacement Open Circuit; Weight:#8 SAE O-Ring Port - Bottom (Top Plugged); Cover End Pressure [Max:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
SAUER 90L100 BEARING SEAT 90L100 METAL 90L100 BARREL WASHER 90L100 SNAP RING 90L100 SEAL OIL 90R100 CHARGING PUMP | Relief Valve Setting:N/A; Cover End RPM [Max:N/A; Port Orientation - Shaft End:Piston Pumps; Port Size:PVH; GPM @ 1,800 rpm, Cover End:0.0 LB; Pump Series:Right Hand (CW); Mounting:Flange; Shaft Type:Variable Displacement Open Circuit; Displacement Cover End (cu in/revolution):#8 SAE O-Ring Port - Bottom (Top Plugged); Cover End Pressure [Max:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Linde HMF135 retainer plate HMF135 shoe plate HMF135 valve plate HMF135 repair parts | Pilot Type:N/A; Mounting Flange:N/A; Displacement Shaft End (cu in/revolution):Piston Pumps; Pressure Port Size, Cover End:PVH; Port Orientation - Cover End:0.0 LB; Displacement Cover End (cu in/revolution):Right Hand (CW); Shaft Length:Flange; Relief Valve Setting:Variable Displacement Open Circuit; Shaft Seal Type:#8 SAE O-Ring Port - Bottom (Top Plugged); Mounting:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
TA1515V10 MAIN CENTRE BLOCK TA1515V10 PISTON SHOE TA1515V10 RETAINER PLATE TA1515V10 BALL GUIDE | Shaft End RPM [Max:N/A; Displacement Shaft End (cu in/revolution):N/A; Minor Diameter:Piston Pumps; Cover End Pressure [Max:PVH; Shaft End Flow @ RPM:0.0 LB; Rotation:Right Hand (CW); Shaft End Pressure [Max:Flange; Port Orientation - Shaft End:Variable Displacement Open Circuit; Port Type:#8 SAE O-Ring Port - Bottom (Top Plugged); Pump Series:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Rexroth A2FM10 RETAINER PLATE A2FM10 DISC SPRING A2FM10 SOCKET BOLT A2FM10 OIL SEAL Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Rexroth A2FM10 RETAINER PLATE A2FM10 DISC SPRING A2FM10 SOCKET BOLT A2FM10 OIL SEAL Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Tokimec Vane Pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump
Customers Who Viewed Rexroth A2FM10 RETAINER PLATE A2FM10 DISC SPRING A2FM10 SOCKET BOLT A2FM10 OIL SEAL Also Viewed
- PC200-5 EXCAVATOR MAIN PUMP PC200-5 PISTON SHOE PC200-5 CYLINDER BLOCK PC200-5 VALVE PLATE
- PC200-3 ROD PC200-3 SNAP RING PC200-3 BARREL WASHER PC200-3 DISK SPRING PC200-3 PILOT PUMP
- PC200-3 SUPPORT PC200-3 YOKE ASSY PC200-3 VARIABLE SPOOL PC200-3 SUPPORT PLATE HPV90
- PC200-3 SPACER PC200-3 SOCKET BOLT PC200-3 COIL SPRING PC200-3 SWASH PLATE HPV90 PC200-3
- PC200-3 VALVE PLATE PC200-3 RETAINER PLATE PC200-3 DRIVE SHAFT PC200-3 RETAINER HPV90