• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Tokimec Vane Pump>TA1515 MAIN CENTRE BLOCK TA1515 PISTON SHOE TA1515 RETAINER PLATE TA1515 BALL GUIDE TA1515 GASKET

  • TA1515 MAIN CENTRE BLOCK TA1515 PISTON SHOE TA1515 RETAINER PLATE TA1515 BALL GUIDE TA1515 GASKET
  • TA1515 MAIN CENTRE BLOCK TA1515 PISTON SHOE TA1515 RETAINER PLATE TA1515 BALL GUIDE TA1515 GASKET

TA1515 MAIN CENTRE BLOCK TA1515 PISTON SHOE TA1515 RETAINER PLATE TA1515 BALL GUIDE TA1515 GASKET MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

TA1515 MAIN CENTRE BLOCK TA1515 PISTON SHOE TA1515 RETAINER PLATE TA1515 BALL GUIDE TA1515 GASKET

category

Tokimec Vane Pump

TA1515 MAIN CENTRE BLOCK TA1515 PISTON SHOE TA1515 RETAINER PLATE TA1515 BALL GUIDE TA1515 GASKET SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

TA1515 MAIN CENTRE BLOCK TA1515 PISTON SHOE TA1515 RETAINER PLATE TA1515 BALL GUIDE TA1515 GASKET Systems

  • 1.56 in
  • 14 Tooth Splined
  • 4535V
  • 2 7/16 in
  • Buna-N
  • 1800
  • 1.055 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 1800
  • 1800
  • N/A
  • 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm
  • 1.25 in
  • 1.247 in
  • 1.06 in
  • 1.05 in
  • N/A
  • 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm
  • 4535V42A35-11BB22R
  • 2500
  • 2500
  • 52.5
  • 63
  • N/A
  • Outlet 90° CCW from Inlet
  • Outlet 90° CW from Inlet
  • 1 1/4 in Code 61
  • 1 1/2 in Code 61
  • 6.8
  • 8.4

TA1515 MAIN CENTRE BLOCK TA1515 PISTON SHOE TA1515 RETAINER PLATE TA1515 BALL GUIDE TA1515 GASKET Dimensions

 

PC200-3 VALVE PLATE PC200-3 RETAINER PLATE PC200-3 DRIVE SHAFT PC200-3 RETAINER HPV90Shaft Seal Type:118.0 LB; Relief Valve Setting:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Pump Series:4535V42A35-11BB22R; Major Diameter [Max:4; Shaft Type:Flange; Shaft Dia.:N/A; Shaft End Flow @ RPM:Standard Pilot; Cover End Flow @ RPM:1.56 in; Mounting Flange:14 Tooth Splined; Pump Series:4535V; Shaft Length:2 7/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A35-11BB22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):6.8; Displacement Shaft End (cu in/revolution):8.4;
Rexroth A8V80 PISTON A8V80 CYLINDER BLOCK A8V80 VALVE PLATE A8V80 RETAINER PLATE A8V80 DRIVE SHAFTShaft End RPM [Max:118.0 LB; Pressure Port Size, Cover End:Flange Mount; Minor Diameter [Max:Right Hand (CW); Pilot Type:4535V42A35-11BB22R; Minor Diameter [Min:4; GPM @ 1,800 rpm, Cover End:Flange; Rotation:N/A; Seal Material:Standard Pilot; Major Diameter [Max:1.56 in; Mounting Flange:14 Tooth Splined; Pump Series:4535V; Shaft Length:2 7/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A35-11BB22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):6.8; Displacement Shaft End (cu in/revolution):8.4;
Rexroth A11VO60 RETAINER PLATE A11VO60 BALL GUIDE A11VO60 SWASH PLATE A11VO60 DRIVE SHAFTPort Orientation - Cover End:118.0 LB; Shaft End Flow @ RPM:Flange Mount; Integral Valve Configuration:Right Hand (CW); Pressure Port Size, Cover End:4535V42A35-11BB22R; Max. RPM [Max:4; Manufacturer Part No.:Flange; Model No.:N/A; Port Orientation - Shaft End:Standard Pilot; Shaft Seal Type:1.56 in; Minor Diameter [Max:14 Tooth Splined; Pump Series:4535V; Shaft Length:2 7/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A35-11BB22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):6.8; Displacement Shaft End (cu in/revolution):8.4;
Linde HPV75 retainer plate HPV75 valve plate HPV75 hydraulic pump spare partsDisplacement Cover End (cu in/revolution):118.0 LB; Pressure Port Size, Cover End:Flange Mount; Port Size:Right Hand (CW); Controlled Flow Rate:4535V42A35-11BB22R; Manufacturer Part No.:4; Integral Valve Configuration:Flange; Seal Material:N/A; Cover End Flow @ RPM:Standard Pilot; Model No.:1.56 in; GPM @ 1,800 rpm, Shaft End:14 Tooth Splined; Pump Series:4535V; Shaft Length:2 7/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A35-11BB22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):6.8; Displacement Shaft End (cu in/revolution):8.4;
REXROTH A4VG71 PISTON SHOE A4VG71 CYLINDER BLOCK A4VG71 VALVE PLATE A4VG71 RETAINER PLATECover End Pressure [Max:118.0 LB; Manufacturer Part No.:Flange Mount; Integral Valve Configuration:Right Hand (CW); Shaft Seal Type:4535V42A35-11BB22R; GPM @ 1,800 rpm, Cover End:4; Cover End Flow @ RPM:Flange; Pressure Port Size, Shaft End:N/A; Seal Material:Standard Pilot; Pilot Type:1.56 in; Spline Description:14 Tooth Splined; Pump Series:4535V; Shaft Length:2 7/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A35-11BB22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):6.8; Displacement Shaft End (cu in/revolution):8.4;
Linde B2PV50 DRIVE SHAFT B2PV50 CENTER PIN B2PV50 BALL GUIDE B2PV50 RETAINERPort Type:118.0 LB; Port Orientation - Cover End:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Shaft Seal Type:4535V42A35-11BB22R; Port Size:4; Displacement Cover End (cu in/revolution):Flange; Cover End Flow @ RPM:N/A; Seal Material:Standard Pilot; GPM @ 1,800 rpm, Shaft End:1.56 in; Cover End Pressure [Max:14 Tooth Splined; Pump Series:4535V; Shaft Length:2 7/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A35-11BB22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):6.8; Displacement Shaft End (cu in/revolution):8.4;
REXROTH A4VG71 BALL GUIDE A4VG71 DRIVE SHAFT A4VG71 SWASH PLATE A4VG71 SADDLE BEARINGRelief Valve Setting:118.0 LB; Shaft End RPM [Max:Flange Mount; Mounting Flange:Right Hand (CW); Pilot Type:4535V42A35-11BB22R; Cover End RPM [Max:4; Minor Diameter [Min:Flange; Manufacturer Part No.:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Weight:1.56 in; Shaft Type:14 Tooth Splined; Pump Series:4535V; Shaft Length:2 7/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A35-11BB22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):6.8; Displacement Shaft End (cu in/revolution):8.4;
Rexroth A8VO172 RING PISTON A8VO172 CYLINDER BLOCK A8VO172 VALVE PLATE A8VO172 RETAINER PLATEPort Orientation - Cover End:118.0 LB; Relief Valve Setting:Flange Mount; Port Size:Right Hand (CW); Minor Diameter [Max:4535V42A35-11BB22R; Minor Diameter:4; Pressure Port Size, Shaft End:Flange; Major Diameter [Max:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Max. RPM [Max:1.56 in; Shaft End RPM [Max:14 Tooth Splined; Pump Series:4535V; Shaft Length:2 7/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A35-11BB22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):6.8; Displacement Shaft End (cu in/revolution):8.4;
PC400-7 TRAVEL MOTOR SPARE PARTS PC400-7 RING PISTON PC400-7 CYLINDER BLOCK PC400-7Major Diameter [Max:118.0 LB; Shaft Seal Type:Flange Mount; Shaft Type:Right Hand (CW); GPM @ 1,800 rpm, Cover End:4535V42A35-11BB22R; Port Orientation - Cover End:4; Port Type:Flange; Cover End Flow @ RPM:N/A; Max. RPM [Max:Standard Pilot; Pressure Port Size, Shaft End:1.56 in; Displacement Cover End (cu in/revolution):14 Tooth Splined; Pump Series:4535V; Shaft Length:2 7/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A35-11BB22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):6.8; Displacement Shaft End (cu in/revolution):8.4;
Rexroth A2FM16 CENTER PIN A2FM16 RETAINER PLATE A2FM16 DISC SPRING A2FM16 SOCKET BOLT A2FM16 OIL SEALControlled Flow Rate:118.0 LB; Port Orientation - Shaft End:Flange Mount; Model No.:Right Hand (CW); Manufacturer Part No.:4535V42A35-11BB22R; Mounting:4; Shaft Seal Type:Flange; Shaft End Pressure [Max:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Port Size:1.56 in; Cover End RPM [Max:14 Tooth Splined; Pump Series:4535V; Shaft Length:2 7/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A35-11BB22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):6.8; Displacement Shaft End (cu in/revolution):8.4;

 

 

TA1515 MAIN CENTRE BLOCK TA1515 PISTON SHOE TA1515 RETAINER PLATE TA1515 BALL GUIDE TA1515 GASKET Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

TA1515 MAIN CENTRE BLOCK TA1515 PISTON SHOE TA1515 RETAINER PLATE TA1515 BALL GUIDE TA1515 GASKET Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Tokimec Vane Pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed TA1515 MAIN CENTRE BLOCK TA1515 PISTON SHOE TA1515 RETAINER PLATE TA1515 BALL GUIDE TA1515 GASKET Also Viewed

  • PC200-5 EXCAVATOR MAIN PUMP PC200-5 PISTON SHOE PC200-5 CYLINDER BLOCK PC200-5 VALVE PLATE
  • PC200-3 ROD PC200-3 SNAP RING PC200-3 BARREL WASHER PC200-3 DISK SPRING PC200-3 PILOT PUMP
  • PC200-3 SUPPORT PC200-3 YOKE ASSY PC200-3 VARIABLE SPOOL PC200-3 SUPPORT PLATE HPV90
  • PC200-3 SPACER PC200-3 SOCKET BOLT PC200-3 COIL SPRING PC200-3 SWASH PLATE HPV90 PC200-3
  • PC200-3 VALVE PLATE PC200-3 RETAINER PLATE PC200-3 DRIVE SHAFT PC200-3 RETAINER HPV90
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us