Home>Products>Excavator Hydraulic>rack adjuster,recoil spring assembly,PC60/PC120/PC130/PC200/PC210/PC220/PC240/PC270/PC300/PC360/PC400/PC450
rack adjuster,recoil spring assembly,PC60/PC120/PC130/PC200/PC210/PC220/PC240/PC270/PC300/PC360/PC400/PC450 MODELS
Need a CAD or 3D Model?
rack adjuster,recoil spring assembly,PC60/PC120/PC130/PC200/PC210/PC220/PC240/PC270/PC300/PC360/PC400/PC450
category
Excavator Hydraulic
rack adjuster,recoil spring assembly,PC60/PC120/PC130/PC200/PC210/PC220/PC240/PC270/PC300/PC360/PC400/PC450 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
rack adjuster,recoil spring assembly,PC60/PC120/PC130/PC200/PC210/PC220/PC240/PC270/PC300/PC360/PC400/PC450 Systems
- 0.73 in
- 11 Tooth Splined
- 20 / 1750
- V20
- 1.25 in
- SAE-12
- Buna-N
- 2400
- 2200 psi
- 19 1/2
- S
- SAE A, 2 Bolt
- S
- 1
- 90° CW from Inlet
- 2.59
- w/o Integral Valves
- 38D
rack adjuster,recoil spring assembly,PC60/PC120/PC130/PC200/PC210/PC220/PC240/PC270/PC300/PC360/PC400/PC450 Dimensions
hydraulic axial piston pump excavator part for kobelco volvo doosan daewoo | Mounting Flange:18.0 LB; Shaft End Pressure [Max:Flange Mount; Seal Material:Right Hand (CW); Port Orientation - Cover End:SAE-20; Rotation:SAE; Shaft Type:N/A; Shaft Key:11; Pressure Port Size, Cover End:13 gpm @ 1200 rpm; Model No.:0.73 in; Minor Diameter [Min:11 Tooth Splined; GPM @ Speed:20 / 1750; Pump Series:V20; Shaft Length:1.25 in; Pressure Port:SAE-12; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:19 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):2.59; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38D; |
excavator swing device/rotating motor, swing motor for E40/E70/E110/E120/E200/E300/E450/E235/E320/E325/E330/E350 | Seal Material:18.0 LB; Integral Valve Configuration:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Max. RPM [Max:SAE-20; Minor Diameter:SAE; Shaft End Pressure [Max:N/A; Shaft End Flow @ RPM:11; GPM @ 1,800 rpm, Cover End:13 gpm @ 1200 rpm; Controlled Flow Rate:0.73 in; Displacement Cover End (cu in/revolution):11 Tooth Splined; GPM @ Speed:20 / 1750; Pump Series:V20; Shaft Length:1.25 in; Pressure Port:SAE-12; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:19 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):2.59; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38D; |
final drive, travel motor assy,for excavator PC70-7/8,PC75,PC75UU,PC750-6/7 | Shaft Dia.:18.0 LB; Port Type:Flange Mount; Shaft Seal Type:Right Hand (CW); Minor Diameter [Min:SAE-20; Major Diameter [Min:SAE; Shaft Key:N/A; Max. RPM [Max:11; Cover End Flow @ RPM:13 gpm @ 1200 rpm; Shaft Type:0.73 in; Shaft Length:11 Tooth Splined; GPM @ Speed:20 / 1750; Pump Series:V20; Shaft Length:1.25 in; Pressure Port:SAE-12; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:19 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):2.59; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38D; |
Shantui engine parts,piston,piston ring,cylinder liner,NT855,KTA19,M11,SD16,SD22,SD23,SD32,SD42 | Minor Diameter [Max:18.0 LB; Mounting:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Model No.:SAE-20; Cover End Pressure [Max:SAE; GPM @ 1,800 rpm, Shaft End:N/A; Pump Series:11; Mounting Flange:13 gpm @ 1200 rpm; Shaft Seal Type:0.73 in; Shaft Length:11 Tooth Splined; GPM @ Speed:20 / 1750; Pump Series:V20; Shaft Length:1.25 in; Pressure Port:SAE-12; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:19 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):2.59; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38D; |
swing motor shaft for excavator,motor long extension drive shaft kobelco,volvo,doosan | Pressure Port Size, Cover End:18.0 LB; Minor Diameter [Max:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Shaft Type:SAE-20; Shaft Dia.:SAE; Displacement Shaft End (cu in/revolution):N/A; GPM @ 1,800 rpm, Cover End:11; Integral Valve Configuration:13 gpm @ 1200 rpm; Mounting Flange:0.73 in; Weight:11 Tooth Splined; GPM @ Speed:20 / 1750; Pump Series:V20; Shaft Length:1.25 in; Pressure Port:SAE-12; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:19 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):2.59; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38D; |
Walking motor Kobelco,final drive,travel motor for Mini excavator Kobelco SK05, SK07,SK09,SK60 | Pump Series:18.0 LB; Rotation:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Shaft Length:SAE-20; Major Diameter [Min:SAE; Shaft Type:N/A; Pressure Port Size, Cover End:11; Shaft End Flow @ RPM:13 gpm @ 1200 rpm; Max. RPM [Max:0.73 in; Cover End Pressure [Max:11 Tooth Splined; GPM @ Speed:20 / 1750; Pump Series:V20; Shaft Length:1.25 in; Pressure Port:SAE-12; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:19 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):2.59; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38D; |
bobcat excavator travel motor, walking motor, final drive MX331,MX337,MX341,E50,E32,E35,E43,E80,MX325,MX328,MX334,MX430,E26,E62 | Model No.:18.0 LB; Shaft Dia.:Flange Mount; Major Diameter [Min:Right Hand (CW); Max. RPM [Max:SAE-20; Pressure Port Size, Cover End:SAE; Minor Diameter [Min:N/A; Minor Diameter:11; Shaft End Pressure [Max:13 gpm @ 1200 rpm; Rotation:0.73 in; Shaft Length:11 Tooth Splined; GPM @ Speed:20 / 1750; Pump Series:V20; Shaft Length:1.25 in; Pressure Port:SAE-12; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:19 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):2.59; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38D; |
excavator cabin, operator drive cab for Kobelco,Daewoo,Doosan,Kato,Kubota,Volvo,Sunitomo | Major Diameter [Max:18.0 LB; Seal Material:Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); Shaft End RPM [Max:SAE-20; Mounting:SAE; Pilot Type:N/A; Model No.:11; Minor Diameter [Min:13 gpm @ 1200 rpm; Displacement Cover End (cu in/revolution):0.73 in; Minor Diameter:11 Tooth Splined; GPM @ Speed:20 / 1750; Pump Series:V20; Shaft Length:1.25 in; Pressure Port:SAE-12; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:19 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):2.59; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38D; |
bolt on excavator rubber track pad,track belt for Doosan,Daewoo,Kobelco,Kato,Kubota,Volvo,Sumitomo | Pump Series:18.0 LB; Shaft Key:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Pressure Port Size, Cover End:SAE-20; Minor Diameter [Min:SAE; Shaft Seal Type:N/A; Shaft Type:11; GPM @ 1,800 rpm, Cover End:13 gpm @ 1200 rpm; Shaft Dia.:0.73 in; Relief Valve Setting:11 Tooth Splined; GPM @ Speed:20 / 1750; Pump Series:V20; Shaft Length:1.25 in; Pressure Port:SAE-12; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:19 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):2.59; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38D; |
excavator slewing ring,swing gear for kobelco,daewoo,doosan,Volvo | Mounting Flange:18.0 LB; Relief Valve Setting:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Weight:SAE-20; Shaft End Flow @ RPM:SAE; Minor Diameter [Min:N/A; Shaft Length:11; Spline Description:13 gpm @ 1200 rpm; Pressure Port Size, Shaft End:0.73 in; Shaft End RPM [Max:11 Tooth Splined; GPM @ Speed:20 / 1750; Pump Series:V20; Shaft Length:1.25 in; Pressure Port:SAE-12; Seal Material:Buna-N; Max. RPM [Max:2400; Pressure [Max:2200 psi; GPM @ 1,800 rpm:19 1/2; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:S; Mounting Flange Code:1; Outlet Port Position:90° CW from Inlet; Displacement (in³/rev):2.59; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38D; |
rack adjuster,recoil spring assembly,PC60/PC120/PC130/PC200/PC210/PC220/PC240/PC270/PC300/PC360/PC400/PC450 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
rack adjuster,recoil spring assembly,PC60/PC120/PC130/PC200/PC210/PC220/PC240/PC270/PC300/PC360/PC400/PC450 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Excavator Hydraulic CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump
Customers Who Viewed rack adjuster,recoil spring assembly,PC60/PC120/PC130/PC200/PC210/PC220/PC240/PC270/PC300/PC360/PC400/PC450 Also Viewed
- volvo excavator undercarriage parts , track shoe assy for volvo EC210B
- PC200-8 excavator swing circle PC220-7 PC300-7 swing bearing
- Excavator PC300-7 swing bearing for PC120 PC200-6 PC220-7
- volvo excavator track shoe assy for volvo EC210B , volvo genuine parts
- PC200-8 PC220-7 excavator slewing circle swing bearing for PC300-7 PC400-8