• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Excavator Hydraulic>swing motor shaft for excavator,motor long extension drive shaft kobelco,volvo,doosan

  • swing motor shaft for excavator,motor long extension drive shaft kobelco,volvo,doosan
  • swing motor shaft for excavator,motor long extension drive shaft kobelco,volvo,doosan

swing motor shaft for excavator,motor long extension drive shaft kobelco,volvo,doosan MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

swing motor shaft for excavator,motor long extension drive shaft kobelco,volvo,doosan

category

Excavator Hydraulic

swing motor shaft for excavator,motor long extension drive shaft kobelco,volvo,doosan SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

swing motor shaft for excavator,motor long extension drive shaft kobelco,volvo,doosan Systems

  • 1.56 in
  • 14 Tooth Splined
  • 4535V
  • 2.4375 in
  • Buna-N
  • 1800
  • 1.055 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 1800
  • 1800
  • N/A
  • 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
  • 1.25 in
  • 1.247 in
  • 1.06 in
  • 1.05 in
  • N/A
  • 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm
  • 4535V42A25-11DD22R
  • 2500
  • 2500
  • 37.5
  • 63
  • N/A
  • Outlet 90° CW from Inlet
  • Outlet 90° CW from Inlet
  • 1 1/4 in Code 61
  • 1 1/2 in Code 61
  • 4.9
  • 8.4

swing motor shaft for excavator,motor long extension drive shaft kobelco,volvo,doosan Dimensions

 

Hydraulic pump,Kawasaki Pump K5V140DT,K3V140DT,K3V63DT,K3V112DT,K3V180DT,Hyunday/DaewooModel No.:118.0 LB; Mounting Flange:Flange Mount; Pump Series:Right Hand (CW); Port Orientation - Shaft End:4535V42A25-11DD22R; Major Diameter [Min:4; GPM @ 1,800 rpm, Shaft End:Flange; Shaft Type:N/A; Cover End Pressure [Max:Standard Pilot; Weight:1.56 in; Pressure Port Size, Cover End:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
PC120 travel reducer gearbox, PC120 travel reducer, PC120 drive gearbox for PC50/PC60/PC75/PC100/PC120/PC200Port Type:118.0 LB; Port Orientation - Cover End:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Mounting:4535V42A25-11DD22R; Port Size:4; Major Diameter [Min:Flange; Rotation:N/A; Shaft Length:Standard Pilot; Weight:1.56 in; GPM @ 1,800 rpm, Cover End:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
Hydraulic main pump for PC30R-8 excavator Used, Original 708-1T-00141 708-1T-00142Cover End Pressure [Max:118.0 LB; Cover End Flow @ RPM:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Pressure Port Size, Cover End:4535V42A25-11DD22R; Manufacturer Part No.:4; Minor Diameter:Flange; Shaft End RPM [Max:N/A; Shaft Key:Standard Pilot; Displacement Shaft End (cu in/revolution):1.56 in; Port Orientation - Cover End:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
PC200-8 PC220-7 excavator slewing circle swing bearing for PC300-7 PC400-8Rotation:118.0 LB; Shaft Dia.:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Shaft End RPM [Max:4535V42A25-11DD22R; Minor Diameter:4; Model No.:Flange; Pilot Type:N/A; Major Diameter [Min:Standard Pilot; Cover End Pressure [Max:1.56 in; Cover End RPM [Max:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
PC130 track linkRotation:118.0 LB; Minor Diameter [Min:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Minor Diameter [Max:4535V42A25-11DD22R; Manufacturer Part No.:4; GPM @ 1,800 rpm, Shaft End:Flange; Pressure Port Size, Shaft End:N/A; Controlled Flow Rate:Standard Pilot; Displacement Shaft End (cu in/revolution):1.56 in; Spline Description:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
excavator gear pump,excavtor hydraulic pump seal kit part,mini commercial gear pump for kobelco,doosan,volvoSeal Material:118.0 LB; Pilot Type:Flange Mount; Shaft Seal Type:Right Hand (CW); Rotation:4535V42A25-11DD22R; Manufacturer Part No.:4; GPM @ 1,800 rpm, Shaft End:Flange; Shaft Type:N/A; Max. RPM [Max:Standard Pilot; Model No.:1.56 in; Major Diameter [Min:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
Final drive for E312, travel motor assy for E312Controlled Flow Rate:118.0 LB; Weight:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Minor Diameter [Max:4535V42A25-11DD22R; Major Diameter [Min:4; Pump Series:Flange; Seal Material:N/A; Minor Diameter [Min:Standard Pilot; Shaft Seal Type:1.56 in; Shaft End RPM [Max:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
final drive motor for kubota kx91-2,kx91-2 travel motor/drive motorSeal Material:118.0 LB; Rotation:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Shaft Key:4535V42A25-11DD22R; Cover End RPM [Max:4; Model No.:Flange; Pump Series:N/A; Relief Valve Setting:Standard Pilot; Shaft Length:1.56 in; Max. RPM [Max:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
excavator pump, hydraulic pump,axial piston pump,Deawoo,Doosan,KobelcoGPM @ 1,800 rpm, Shaft End:118.0 LB; Cover End Flow @ RPM:Flange Mount; Major Diameter [Max:Right Hand (CW); Max. RPM [Max:4535V42A25-11DD22R; Shaft End RPM [Max:4; GPM @ 1,800 rpm, Cover End:Flange; Shaft Seal Type:N/A; Manufacturer Part No.:Standard Pilot; Pilot Type:1.56 in; Rotation:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;
fuel pump, PC120/PC130/PC200/PC210/PC220 fuel pump, excavator fuel pumpPort Orientation - Cover End:118.0 LB; Port Size:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Integral Valve Configuration:4535V42A25-11DD22R; Shaft End RPM [Max:4; Shaft Key:Flange; Pressure Port Size, Shaft End:N/A; Shaft Length:Standard Pilot; Port Type:1.56 in; Minor Diameter [Max:14 Tooth Splined; Pump Series:4535V; Shaft Length:2.4375 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4535V42A25-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:37.5; GPM @ 1,800 rpm, Shaft End:63; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 1/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):4.9; Displacement Shaft End (cu in/revolution):8.4;

 

 

swing motor shaft for excavator,motor long extension drive shaft kobelco,volvo,doosan Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

swing motor shaft for excavator,motor long extension drive shaft kobelco,volvo,doosan Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Excavator Hydraulic CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed swing motor shaft for excavator,motor long extension drive shaft kobelco,volvo,doosan Also Viewed

  • volvo excavator undercarriage parts , track shoe assy for volvo EC210B
  • PC200-8 excavator swing circle PC220-7 PC300-7 swing bearing
  • Excavator PC300-7 swing bearing for PC120 PC200-6 PC220-7
  • volvo excavator track shoe assy for volvo EC210B , volvo genuine parts
  • PC200-8 PC220-7 excavator slewing circle swing bearing for PC300-7 PC400-8
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us