• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Rexroth pump>excavator PC450 engine hood 20Y-54-76450, excavator spare parts

  • excavator PC450 engine hood 20Y-54-76450, excavator spare parts
  • excavator PC450 engine hood 20Y-54-76450, excavator spare parts

excavator PC450 engine hood 20Y-54-76450, excavator spare parts MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

excavator PC450 engine hood 20Y-54-76450, excavator spare parts

category

Rexroth pump

excavator PC450 engine hood 20Y-54-76450, excavator spare parts SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

excavator PC450 engine hood 20Y-54-76450, excavator spare parts Systems

  • Standard Pilot
  • 1.25 in
  • Straight w/ Key
  • 4520V
  • 2.4375 in
  • Double
  • Buna-N
  • 2.5
  • N/A
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • N/A
  • Motor
  • 1800
  • 1800
  • N/A
  • 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • 3/4 in Code 61
  • 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm
  • 4520V42A12-1AA22R
  • Outlet Opposite Inlet
  • 3000
  • 2500
  • 18
  • 63
  • 135° CCW From Inlet Port
  • N/A
  • Outlet 135° CCW from Inlet

excavator PC450 engine hood 20Y-54-76450, excavator spare parts Dimensions

 

PC200 300 400 excavator engine spare parts pistons liners kit cylinder linerSpline Description:95.0 LB; Pressure Port Size, Cover End:Flange Mount; Major Diameter [Max:Right Hand (CW); Mounting Flange:4520V42A12-1AA22R; Cover End RPM [Max:3.5; Shaft End Pressure [Max:Flange; Port Orientation - Cover End:5/16 in; Integral Valve Configuration:22; Rotation:Standard Pilot; Relief Valve Setting:1.25 in; Shaft Type:Straight w/ Key; Pump Series:4520V; Shaft Length:2.4375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4520V42A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):8.4;
excavator PC200-7 air conditioner compressor 20Y-979-6121, excavator cooling systemShaft Type:95.0 LB; Port Size:Flange Mount; Controlled Flow Rate:Right Hand (CW); Shaft Key:4520V42A12-1AA22R; Major Diameter [Max:3.5; Port Type:Flange; GPM @ 1,800 rpm, Cover End:5/16 in; Major Diameter [Min:22; Integral Valve Configuration:Standard Pilot; Pump Series:1.25 in; Shaft Type:Straight w/ Key; Pump Series:4520V; Shaft Length:2.4375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4520V42A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):8.4;
Final driver track motor for excavatorSpline Description:95.0 LB; Mounting:Flange Mount; Shaft Length:Right Hand (CW); Integral Valve Configuration:4520V42A12-1AA22R; Shaft Seal Type:3.5; Pump Series:Flange; Seal Material:5/16 in; Relief Valve Setting:22; Pilot Type:Standard Pilot; Manufacturer Part No.:1.25 in; Shaft Type:Straight w/ Key; Pump Series:4520V; Shaft Length:2.4375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4520V42A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):8.4;
genuine and china hydraulic pump 702-21-57400 solenoid valveWeight:95.0 LB; Pressure Port Size, Cover End:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Shaft Length:4520V42A12-1AA22R; Integral Valve Configuration:3.5; GPM @ 1,800 rpm, Shaft End:Flange; Port Orientation - Shaft End:5/16 in; Shaft Dia.:22; Displacement Cover End (cu in/revolution):Standard Pilot; Mounting:1.25 in; Shaft Type:Straight w/ Key; Pump Series:4520V; Shaft Length:2.4375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4520V42A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):8.4;
ripper pc360Displacement Shaft End (cu in/revolution):95.0 LB; Shaft End RPM [Max:Flange Mount; Controlled Flow Rate:Right Hand (CW); Seal Material:4520V42A12-1AA22R; Pressure Port Size, Shaft End:3.5; Major Diameter [Max:Flange; Shaft End Flow @ RPM:5/16 in; Pump Series:22; Minor Diameter:Standard Pilot; Pilot Type:1.25 in; Shaft Type:Straight w/ Key; Pump Series:4520V; Shaft Length:2.4375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4520V42A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):8.4;
sk250-8 turbocharger for engine parts of excavator,tractor machine,6205-81-8110,Repair Kit,Cartridge,GasketPort Orientation - Cover End:95.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Integral Valve Configuration:4520V42A12-1AA22R; Port Orientation - Shaft End:3.5; Pump Series:Flange; Shaft Dia.:5/16 in; Manufacturer Part No.:22; Pressure Port Size, Cover End:Standard Pilot; Rotation:1.25 in; Shaft Type:Straight w/ Key; Pump Series:4520V; Shaft Length:2.4375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4520V42A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):8.4;
SK200-8 excavator hydraulic main pump K3V112DT hydraulic pump China supplierMajor Diameter [Min:95.0 LB; Pressure Port Size, Cover End:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Mounting Flange:4520V42A12-1AA22R; Minor Diameter:3.5; Relief Valve Setting:Flange; Shaft End Pressure [Max:5/16 in; Minor Diameter [Min:22; Shaft Length:Standard Pilot; Pressure Port Size, Shaft End:1.25 in; Shaft Type:Straight w/ Key; Pump Series:4520V; Shaft Length:2.4375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4520V42A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):8.4;
K3V112 HYDRAULIC PUMP ASSY for excavatorWeight:95.0 LB; Shaft End RPM [Max:Flange Mount; Cover End RPM [Max:Right Hand (CW); Manufacturer Part No.:4520V42A12-1AA22R; Spline Description:3.5; Minor Diameter [Min:Flange; Displacement Shaft End (cu in/revolution):5/16 in; Port Orientation - Shaft End:22; Pressure Port Size, Shaft End:Standard Pilot; Pump Series:1.25 in; Shaft Type:Straight w/ Key; Pump Series:4520V; Shaft Length:2.4375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4520V42A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):8.4;
PC120-6/PC220-6/PC100-6/PC128UU/S4D102E/Belt tensioner 6732-61-3630 / excavator engines pare partsMax. RPM [Max:95.0 LB; Port Orientation - Cover End:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Major Diameter [Max:4520V42A12-1AA22R; Cover End Flow @ RPM:3.5; Pressure Port Size, Cover End:Flange; Shaft End RPM [Max:5/16 in; Pressure Port Size, Shaft End:22; GPM @ 1,800 rpm, Cover End:Standard Pilot; Model No.:1.25 in; Shaft Type:Straight w/ Key; Pump Series:4520V; Shaft Length:2.4375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4520V42A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):8.4;
Swing shaft of excavator part pc200-7, 22U-26-21560Displacement Cover End (cu in/revolution):95.0 LB; Port Orientation - Shaft End:Flange Mount; Integral Valve Configuration:Right Hand (CW); Mounting Flange:4520V42A12-1AA22R; Shaft Length:3.5; GPM @ 1,800 rpm, Shaft End:Flange; Mounting:5/16 in; Minor Diameter [Max:22; Shaft Seal Type:Standard Pilot; Pilot Type:1.25 in; Shaft Type:Straight w/ Key; Pump Series:4520V; Shaft Length:2.4375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4520V42A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):8.4;

 

 

excavator PC450 engine hood 20Y-54-76450, excavator spare parts Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

excavator PC450 engine hood 20Y-54-76450, excavator spare parts Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Rexroth pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed excavator PC450 engine hood 20Y-54-76450, excavator spare parts Also Viewed

  • Excavator parts OEM piston and connecting rod engine parts
  • High quality ! Engine part Injector 0445120123
  • excavator/bulldozer/loader radiator hose
  • excavator engine Model 6742-01-3760
  • high quality diesel oil pump for excavator PC200 PC220
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us