Home>Products>Rexroth pump>ripper pc360
ripper pc360
category
Rexroth pump
ripper pc360 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
ripper pc360 Systems
- #8 SAE O-Ring Port - Bottom (Top Plugged)
- 2 in 4-Bolt Flange/Code 61
- N/A
- 14 Tooth Splined
- 26 / 1800
- 1 in 4-Bolt Flange/Code 61
- Pressure Compensator
- 1.89 in
- Side Port
- None
- 26
- SAE C, 4 Bolt
- 14 Tooth Splined
- No Auxiliary Mounting Features
- 3.5
- None
- None
- 3625
- 3,568-3,684 psi
- Standard Displacement
ripper pc360 Dimensions
excavator/relief valve 723-40-71900/excavator spare parts | Controlled Flow Rate:N/A; Minor Diameter [Min:N/A; Shaft Key:Piston Pumps; Rotation:PVH; Shaft End RPM [Max:70.0 LB; Port Orientation - Shaft End:Right Hand (CW); Displacement Cover End (cu in/revolution):Flange; Mounting:Variable Displacement Open Circuit; Minor Diameter:#8 SAE O-Ring Port - Bottom (Top Plugged); GPM @ 1,800 rpm, Shaft End:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
cutting edge/Sell bulldozer Cutting edge cutter end bit | Port Orientation - Cover End:N/A; Pilot Type:N/A; Mounting Flange:Piston Pumps; Cover End RPM [Max:PVH; Manufacturer Part No.:70.0 LB; Cover End Flow @ RPM:Right Hand (CW); Shaft Key:Flange; Minor Diameter [Min:Variable Displacement Open Circuit; Port Orientation - Shaft End:#8 SAE O-Ring Port - Bottom (Top Plugged); Mounting:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
pc210-8 factory direct sale long life main pump | Integral Valve Configuration:N/A; Pilot Type:N/A; Minor Diameter [Min:Piston Pumps; Shaft Seal Type:PVH; Displacement Shaft End (cu in/revolution):70.0 LB; Weight:Right Hand (CW); Port Orientation - Shaft End:Flange; Relief Valve Setting:Variable Displacement Open Circuit; Model No.:#8 SAE O-Ring Port - Bottom (Top Plugged); Rotation:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
air conditioner compressor 20Y-979-6121 for excavator PC200-7 | Rotation:N/A; Seal Material:N/A; Cover End Pressure [Max:Piston Pumps; Shaft Key:PVH; Pressure Port Size, Cover End:70.0 LB; Minor Diameter [Max:Right Hand (CW); Shaft Seal Type:Flange; Max. RPM [Max:Variable Displacement Open Circuit; Major Diameter [Max:#8 SAE O-Ring Port - Bottom (Top Plugged); Minor Diameter:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
excavator parts,pinion shaft swing shaft bearingPC200,PC300,PC120,SK120,EX40,EX60 | Controlled Flow Rate:N/A; Pump Series:N/A; Shaft End Flow @ RPM:Piston Pumps; Max. RPM [Max:PVH; Pressure Port Size, Shaft End:70.0 LB; Spline Description:Right Hand (CW); Shaft Seal Type:Flange; Weight:Variable Displacement Open Circuit; Shaft Length:#8 SAE O-Ring Port - Bottom (Top Plugged); Integral Valve Configuration:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
Excavator parts Excavator Main Wiring Harness, Cab Ass'y, Operator's Cab PC40, PC60-1-2-3-5-6-7, PC100-1-2-3-5-6, PC120-1-2-3-5 | Shaft Key:N/A; Pressure Port Size, Cover End:N/A; Port Size:Piston Pumps; Shaft Type:PVH; Shaft Length:70.0 LB; Minor Diameter [Min:Right Hand (CW); Cover End Pressure [Max:Flange; Manufacturer Part No.:Variable Displacement Open Circuit; Pilot Type:#8 SAE O-Ring Port - Bottom (Top Plugged); Integral Valve Configuration:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
fuel oil injector for excavator PC300-8 excavator spare part | Minor Diameter [Max:N/A; Shaft End Pressure [Max:N/A; Rotation:Piston Pumps; Major Diameter [Max:PVH; Pressure Port Size, Cover End:70.0 LB; Major Diameter [Min:Right Hand (CW); Port Type:Flange; Seal Material:Variable Displacement Open Circuit; Displacement Shaft End (cu in/revolution):#8 SAE O-Ring Port - Bottom (Top Plugged); Cover End RPM [Max:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
Excavator part swing shaft for pc200-5/pc200-7 and rotor shaft for turbocharger | Manufacturer Part No.:N/A; Port Orientation - Shaft End:N/A; Shaft Length:Piston Pumps; Model No.:PVH; Shaft End Flow @ RPM:70.0 LB; Integral Valve Configuration:Right Hand (CW); Minor Diameter:Flange; Port Orientation - Cover End:Variable Displacement Open Circuit; Mounting:#8 SAE O-Ring Port - Bottom (Top Plugged); Port Size:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
cylinder block piston shoe set plate ball guide valve plate for pump AP2D36 | Max. RPM [Max:N/A; Minor Diameter:N/A; Port Orientation - Shaft End:Piston Pumps; Cover End Pressure [Max:PVH; Cover End RPM [Max:70.0 LB; Rotation:Right Hand (CW); Displacement Cover End (cu in/revolution):Flange; Displacement Shaft End (cu in/revolution):Variable Displacement Open Circuit; GPM @ 1,800 rpm, Shaft End:#8 SAE O-Ring Port - Bottom (Top Plugged); Manufacturer Part No.:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
hydraulic motor M2X146B-CHB-10A-19/325-112 | Cover End RPM [Max:N/A; Major Diameter [Max:N/A; Shaft Type:Piston Pumps; Model No.:PVH; Weight:70.0 LB; Shaft End Pressure [Max:Right Hand (CW); Rotation:Flange; Minor Diameter [Min:Variable Displacement Open Circuit; Cover End Pressure [Max:#8 SAE O-Ring Port - Bottom (Top Plugged); Minor Diameter:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
ripper pc360 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
ripper pc360 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Rexroth pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump