Home>Products>Dansion goldcup series pump>Dansion P7P-7R1E-9A4-B00-0A0
Dansion P7P-7R1E-9A4-B00-0A0
category
Dansion goldcup series pump
Dansion P7P-7R1E-9A4-B00-0A0 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Dansion P7P-7R1E-9A4-B00-0A0 Systems
- #8 SAE O-Ring Port - Bottom (Top Plugged)
- 2 in 4-Bolt Flange/Code 61
- N/A
- 14 Tooth Splined
- 26 gpm @ 1800 rpm
- 1 in 4-Bolt Flange/Code 61
- Pressure Compensator
- 1.89 in
- Side Port
- Viton
- None
- 26
- SAE C, 4 Bolt
- Q250 Valve Plate, No Case To Inlet Check Valve
- 14 Tooth Splined
- No Auxiliary Mounting Features
- 3.5
- None
- None
- 3625
- 957-1,073 psi
- Standard Displacement
Dansion P7P-7R1E-9A4-B00-0A0 Dimensions
Dansion P14P-7R5E-9A4-A00-0A0 | Mounting Flange:N/A; Port Size:N/A; Pilot Type:Piston Pumps; Displacement Shaft End (cu in/revolution):PVH; Max. RPM [Max:0.0 LB; Rotation:Right Hand (CW); Pressure Port Size, Cover End:Flange; Pump Series:Variable Displacement Open Circuit; Cover End RPM [Max:#8 SAE O-Ring Port - Bottom (Top Plugged); Shaft Length:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P7P-4R5E-9A7-B00-0B0 | Rotation:N/A; GPM @ 1,800 rpm, Cover End:N/A; Minor Diameter:Piston Pumps; Major Diameter [Min:PVH; Port Type:0.0 LB; Major Diameter [Max:Right Hand (CW); Cover End RPM [Max:Flange; Seal Material:Variable Displacement Open Circuit; Cover End Flow @ RPM:#8 SAE O-Ring Port - Bottom (Top Plugged); Manufacturer Part No.:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P14S-7L5E-9A4-A00-A1 | Cover End Pressure [Max:N/A; Pressure Port Size, Shaft End:N/A; Major Diameter [Max:Piston Pumps; Controlled Flow Rate:PVH; Displacement Cover End (cu in/revolution):0.0 LB; Cover End RPM [Max:Right Hand (CW); Port Orientation - Cover End:Flange; Model No.:Variable Displacement Open Circuit; Seal Material:#8 SAE O-Ring Port - Bottom (Top Plugged); Shaft Seal Type:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P7P-5R5E-9A4-B00-0A0 | Manufacturer Part No.:N/A; Weight:N/A; Port Orientation - Shaft End:Piston Pumps; Relief Valve Setting:PVH; Shaft End Flow @ RPM:0.0 LB; Major Diameter [Max:Right Hand (CW); Shaft End Pressure [Max:Flange; Pump Series:Variable Displacement Open Circuit; GPM @ 1,800 rpm, Cover End:#8 SAE O-Ring Port - Bottom (Top Plugged); Controlled Flow Rate:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P7L-5L5E-9A7-B0X-B0 | Shaft Dia.:N/A; Weight:N/A; Shaft Key:Piston Pumps; Shaft Seal Type:PVH; Relief Valve Setting:0.0 LB; Seal Material:Right Hand (CW); Rotation:Flange; Mounting:Variable Displacement Open Circuit; Manufacturer Part No.:#8 SAE O-Ring Port - Bottom (Top Plugged); Pressure Port Size, Cover End:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P14P-3L5E-9A2-B00-0B0 | Shaft Length:N/A; Minor Diameter [Max:N/A; Weight:Piston Pumps; Max. RPM [Max:PVH; Mounting:0.0 LB; Mounting Flange:Right Hand (CW); Cover End RPM [Max:Flange; Major Diameter [Max:Variable Displacement Open Circuit; Manufacturer Part No.:#8 SAE O-Ring Port - Bottom (Top Plugged); Pilot Type:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P7P-7L1E-9A2-B00-0A0 | Integral Valve Configuration:N/A; Port Type:N/A; Rotation:Piston Pumps; Relief Valve Setting:PVH; Shaft End RPM [Max:0.0 LB; Port Orientation - Cover End:Right Hand (CW); Displacement Cover End (cu in/revolution):Flange; Shaft Dia.:Variable Displacement Open Circuit; Mounting Flange:#8 SAE O-Ring Port - Bottom (Top Plugged); Displacement Shaft End (cu in/revolution):2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P11R-2R5E-9A7-B0X-D0 | Mounting Flange:N/A; Model No.:N/A; Spline Description:Piston Pumps; Seal Material:PVH; Minor Diameter [Max:0.0 LB; Displacement Shaft End (cu in/revolution):Right Hand (CW); Displacement Cover End (cu in/revolution):Flange; Weight:Variable Displacement Open Circuit; Manufacturer Part No.:#8 SAE O-Ring Port - Bottom (Top Plugged); Minor Diameter:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P7P-5L1E-9A7-A00-0B0 | Shaft Key:N/A; Mounting:N/A; Pilot Type:Piston Pumps; Minor Diameter [Max:PVH; Pressure Port Size, Cover End:0.0 LB; Seal Material:Right Hand (CW); Spline Description:Flange; Relief Valve Setting:Variable Displacement Open Circuit; Port Type:#8 SAE O-Ring Port - Bottom (Top Plugged); Port Size:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P7P-5R1E-9A4-B00-0B0 | Mounting:N/A; Integral Valve Configuration:N/A; Major Diameter [Min:Piston Pumps; Major Diameter [Max:PVH; Cover End Flow @ RPM:0.0 LB; Shaft End RPM [Max:Right Hand (CW); Shaft Seal Type:Flange; Displacement Cover End (cu in/revolution):Variable Displacement Open Circuit; Controlled Flow Rate:#8 SAE O-Ring Port - Bottom (Top Plugged); Pressure Port Size, Cover End:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P7P-7R1E-9A4-B00-0A0 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Dansion P7P-7R1E-9A4-B00-0A0 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Dansion goldcup series pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump