Home>Products>Dansion goldcup series pump>Dansion P7P-7R1E-9A4-A00-0B0
Dansion P7P-7R1E-9A4-A00-0B0
category
Dansion goldcup series pump
Dansion P7P-7R1E-9A4-A00-0B0 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Dansion P7P-7R1E-9A4-A00-0B0 Systems
- #8 SAE O-Ring Port - Bottom (Top Plugged)
- 2 in 4-Bolt Flange/Code 61
- 1.25 in
- Straight w/ Key
- 33 / 1800
- 1 in 4-Bolt Flange/Code 61
- Pressure Compensator
- 1.89 in
- Side Port
- Viton
- None
- 33
- SAE C, 4 Bolt
- None
- 1 1/4 w/5/16 Key
- No Auxiliary Mounting Features
- 4.5
- None
- None
- 3625
- Standard Displacement
Dansion P7P-7R1E-9A4-A00-0B0 Dimensions
Dansion P7P-5R1E-9A4-A00-0A0 | Shaft Length:5/16 in; Pressure Port Size, Shaft End:No Paint; Weight:Piston Pumps; Seal Material:PVH; Port Size:80.0 LB; Pressure Port Size, Cover End:Right Hand (CW); Shaft Key:Flange; Minor Diameter:Variable Displacement Open Circuit; Major Diameter [Min:#8 SAE O-Ring Port - Bottom (Top Plugged); Major Diameter [Max:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:1 1/4 w/5/16 Key; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P7P-4L5E-9A2-B00-0A0 | Major Diameter [Max:5/16 in; Major Diameter [Min:No Paint; Shaft Length:Piston Pumps; Shaft Type:PVH; Pump Series:80.0 LB; Port Orientation - Shaft End:Right Hand (CW); Displacement Shaft End (cu in/revolution):Flange; Cover End RPM [Max:Variable Displacement Open Circuit; Shaft Key:#8 SAE O-Ring Port - Bottom (Top Plugged); Manufacturer Part No.:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:1 1/4 w/5/16 Key; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P11S-8R1E-9A8-A00-A1 | Port Size:5/16 in; Port Type:No Paint; Pressure Port Size, Cover End:Piston Pumps; Max. RPM [Max:PVH; Shaft Key:80.0 LB; Major Diameter [Max:Right Hand (CW); Mounting:Flange; Cover End RPM [Max:Variable Displacement Open Circuit; GPM @ 1,800 rpm, Cover End:#8 SAE O-Ring Port - Bottom (Top Plugged); Port Orientation - Cover End:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:1 1/4 w/5/16 Key; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P11P-7L1E-9A4-A00-0B0 | Cover End Pressure [Max:5/16 in; Rotation:No Paint; Spline Description:Piston Pumps; Minor Diameter:PVH; Shaft Type:80.0 LB; Port Size:Right Hand (CW); Port Orientation - Shaft End:Flange; Shaft Length:Variable Displacement Open Circuit; Cover End Flow @ RPM:#8 SAE O-Ring Port - Bottom (Top Plugged); Major Diameter [Max:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:1 1/4 w/5/16 Key; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P7P-7R5E-9A4-A00-0A0 | Shaft End RPM [Max:5/16 in; Pump Series:No Paint; Major Diameter [Max:Piston Pumps; Displacement Shaft End (cu in/revolution):PVH; Relief Valve Setting:80.0 LB; Rotation:Right Hand (CW); Pilot Type:Flange; Model No.:Variable Displacement Open Circuit; Pressure Port Size, Shaft End:#8 SAE O-Ring Port - Bottom (Top Plugged); GPM @ 1,800 rpm, Cover End:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:1 1/4 w/5/16 Key; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P11R-2L5E-9A6-A0X-E0 | Shaft End Pressure [Max:5/16 in; Pump Series:No Paint; Cover End Pressure [Max:Piston Pumps; Weight:PVH; Minor Diameter [Min:80.0 LB; Mounting:Right Hand (CW); Displacement Shaft End (cu in/revolution):Flange; Shaft Dia.:Variable Displacement Open Circuit; Pressure Port Size, Cover End:#8 SAE O-Ring Port - Bottom (Top Plugged); Port Type:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:1 1/4 w/5/16 Key; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P7R-4L5E-9A7-B0X-A0 | Displacement Shaft End (cu in/revolution):5/16 in; Controlled Flow Rate:No Paint; Shaft Dia.:Piston Pumps; Mounting Flange:PVH; Shaft End RPM [Max:80.0 LB; Integral Valve Configuration:Right Hand (CW); Port Orientation - Cover End:Flange; Pressure Port Size, Shaft End:Variable Displacement Open Circuit; Cover End Pressure [Max:#8 SAE O-Ring Port - Bottom (Top Plugged); Pump Series:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:1 1/4 w/5/16 Key; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P7P-5L5E-9A7-A00-0A0 | Shaft Seal Type:5/16 in; Relief Valve Setting:No Paint; Cover End RPM [Max:Piston Pumps; Port Size:PVH; Shaft End RPM [Max:80.0 LB; Shaft End Flow @ RPM:Right Hand (CW); Weight:Flange; Seal Material:Variable Displacement Open Circuit; Manufacturer Part No.:#8 SAE O-Ring Port - Bottom (Top Plugged); Minor Diameter [Min:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:1 1/4 w/5/16 Key; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P11S-8L1E-9A7-A00-A1 | Manufacturer Part No.:5/16 in; Port Orientation - Shaft End:No Paint; Displacement Cover End (cu in/revolution):Piston Pumps; Major Diameter [Max:PVH; Mounting:80.0 LB; Port Size:Right Hand (CW); GPM @ 1,800 rpm, Cover End:Flange; Minor Diameter [Max:Variable Displacement Open Circuit; Shaft Dia.:#8 SAE O-Ring Port - Bottom (Top Plugged); Displacement Shaft End (cu in/revolution):2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:1 1/4 w/5/16 Key; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P14P-3L5E-9A4-A00-0A0 | Pressure Port Size, Cover End:5/16 in; Shaft Seal Type:No Paint; Cover End Pressure [Max:Piston Pumps; Mounting:PVH; Shaft Length:80.0 LB; Cover End Flow @ RPM:Right Hand (CW); Port Orientation - Cover End:Flange; Displacement Cover End (cu in/revolution):Variable Displacement Open Circuit; Port Size:#8 SAE O-Ring Port - Bottom (Top Plugged); Controlled Flow Rate:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1.25 in; Shaft Type:Straight w/ Key; GPM @ Speed:33 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:33; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:1 1/4 w/5/16 Key; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):4.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Maximum Displacement Adjustment:Standard Displacement; |
Dansion P7P-7R1E-9A4-A00-0B0 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Dansion P7P-7R1E-9A4-A00-0B0 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Dansion goldcup series pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump