• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Tokimec Vane Pump>HPV95 VALVE PLATE HPV95 RETAINER PLATE HPV95 BALL GUIDE HPV95 DRIVE SHAFT HPV95

  • HPV95 VALVE PLATE HPV95 RETAINER PLATE HPV95 BALL GUIDE HPV95 DRIVE SHAFT HPV95
  • HPV95 VALVE PLATE HPV95 RETAINER PLATE HPV95 BALL GUIDE HPV95 DRIVE SHAFT HPV95

HPV95 VALVE PLATE HPV95 RETAINER PLATE HPV95 BALL GUIDE HPV95 DRIVE SHAFT HPV95 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

HPV95 VALVE PLATE HPV95 RETAINER PLATE HPV95 BALL GUIDE HPV95 DRIVE SHAFT HPV95

category

Tokimec Vane Pump

HPV95 VALVE PLATE HPV95 RETAINER PLATE HPV95 BALL GUIDE HPV95 DRIVE SHAFT HPV95 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

HPV95 VALVE PLATE HPV95 RETAINER PLATE HPV95 BALL GUIDE HPV95 DRIVE SHAFT HPV95 Systems

  • 0.875 in
  • 13 Tooth Splined
  • 2520VQ
  • 1.375 in
  • Buna-N
  • 2500
  • 0.715 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2700
  • 2500
  • N/A
  • 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • N/A
  • N/A
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 2520VQ21A5-11BB20L
  • 3000
  • 3000
  • 7.5
  • 31.5
  • w/o Integral Valves
  • Outlet 45° CCW from Inlet
  • Outlet 90° CCW from Inlet
  • 3/4 in Flange
  • 1 in Flange
  • 1.1
  • 4.12

HPV95 VALVE PLATE HPV95 RETAINER PLATE HPV95 BALL GUIDE HPV95 DRIVE SHAFT HPV95 Dimensions

 

Rexroth A2FM16 RING PISTON A2FM16 RING A2FM16 CYLINDER BLOCK A2FM16 VALVE PLATE M A2FM16 DRIVE SHAFTCover End RPM [Max:45.0 LB; Controlled Flow Rate:Flange Mount; Pump Series:Left Hand (CCW); Mounting Flange:2520VQ21A5-11BB20L; Mounting:2 1/2; Cover End Flow @ RPM:Flange; Pilot Type:N/A; Pressure Port Size, Shaft End:Standard Pilot; Shaft Length:0.875 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A5-11BB20L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.12;
SAUER SMF23 BLOCK SPRING SMF23 SHAFT BEARING MF23 BARREL WASHER MF23 SEAL KIT MF23 SNAP RING MF23 HYDRAULIC MOTOR PARTSShaft Dia.:45.0 LB; Minor Diameter [Max:Flange Mount; Pilot Type:Left Hand (CCW); Spline Description:2520VQ21A5-11BB20L; Port Orientation - Cover End:2 1/2; Minor Diameter:Flange; Displacement Shaft End (cu in/revolution):N/A; Model No.:Standard Pilot; GPM @ 1,800 rpm, Cover End:0.875 in; Mounting:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A5-11BB20L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.12;
Rexroth A10VO100 A10VSO100 SWASH PLATE PISTON A10VSO100 BARREL WASHER A10VSO100 BIG BEARING A10VSO100 SMALL BEARINGShaft End RPM [Max:45.0 LB; Major Diameter [Max:Flange Mount; Minor Diameter [Min:Left Hand (CCW); Shaft Type:2520VQ21A5-11BB20L; Pressure Port Size, Shaft End:2 1/2; Port Type:Flange; Cover End Pressure [Max:N/A; Shaft Seal Type:Standard Pilot; Port Orientation - Cover End:0.875 in; Pilot Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A5-11BB20L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.12;
Linde HMF135 retainer plate HMF135 shoe plate HMF135 valve plate HMF135 repair partsWeight:45.0 LB; Shaft End Pressure [Max:Flange Mount; Model No.:Left Hand (CCW); Shaft Seal Type:2520VQ21A5-11BB20L; Spline Description:2 1/2; Port Type:Flange; Displacement Cover End (cu in/revolution):N/A; Cover End RPM [Max:Standard Pilot; Shaft Dia.:0.875 in; Pressure Port Size, Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A5-11BB20L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.12;
PC60-7 RETAINER PLATE PC60-7 BALL GUIDE PC60-7 SHOE PLATE PC60-7 DRIVE SHAFT PC60-7 FRICTION PLATEShaft End Flow @ RPM:45.0 LB; Shaft End RPM [Max:Flange Mount; Mounting Flange:Left Hand (CCW); Weight:2520VQ21A5-11BB20L; Mounting:2 1/2; Pressure Port Size, Cover End:Flange; Major Diameter [Min:N/A; Port Orientation - Cover End:Standard Pilot; Cover End Flow @ RPM:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A5-11BB20L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.12;
VICKERS PVB29 COIL SPRING PVB29 HEAD BLOCK PVB29 SEAL OIL PVB29 SEAL KIT PVB29 PRESS PINShaft End Pressure [Max:45.0 LB; Shaft Length:Flange Mount; Mounting Flange:Left Hand (CCW); Rotation:2520VQ21A5-11BB20L; Controlled Flow Rate:2 1/2; Spline Description:Flange; Max. RPM [Max:N/A; Model No.:Standard Pilot; Port Type:0.875 in; Shaft Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A5-11BB20L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.12;
HPV90 SWASH PLATE HPV90 SUPPORT HPV90 YOKE ASSY HPV90 VARIABLE SPOOL HPV90 SUPPORT PLATEPort Orientation - Cover End:45.0 LB; Cover End Flow @ RPM:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Pressure Port Size, Cover End:2520VQ21A5-11BB20L; Minor Diameter:2 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Seal Material:N/A; Pilot Type:Standard Pilot; Max. RPM [Max:0.875 in; Port Size:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A5-11BB20L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.12;
Hitachi HPV091 HYDRAULIC PUMP SPARE PARTS HPV091 PISTON HPV091 CYLINDER BLOCKPort Size:45.0 LB; Rotation:Flange Mount; Shaft End RPM [Max:Left Hand (CCW); Pilot Type:2520VQ21A5-11BB20L; Model No.:2 1/2; Port Type:Flange; Integral Valve Configuration:N/A; Controlled Flow Rate:Standard Pilot; Minor Diameter [Min:0.875 in; Pump Series:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A5-11BB20L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.12;
Rexroth A2FO500 CENTER PIN A2FO500 RETAINER PLATE A2FO500 DISC SPRING A2FO500 SOCKET BOLT A2FO500 OIL SEALShaft Dia.:45.0 LB; Minor Diameter [Min:Flange Mount; Weight:Left Hand (CCW); Displacement Shaft End (cu in/revolution):2520VQ21A5-11BB20L; Pilot Type:2 1/2; Port Size:Flange; Shaft Type:N/A; Shaft End RPM [Max:Standard Pilot; Shaft Seal Type:0.875 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A5-11BB20L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.12;
PC400-7 TRAVEL MOTOR PC400-7 VALVE PLATE M PC400-7 RETAINER PLATE PC400-7 CENTER PINMajor Diameter [Max:45.0 LB; Mounting Flange:Flange Mount; Minor Diameter [Min:Left Hand (CCW); Shaft End Flow @ RPM:2520VQ21A5-11BB20L; Minor Diameter [Max:2 1/2; Pressure Port Size, Cover End:Flange; Pump Series:N/A; Shaft End Pressure [Max:Standard Pilot; Major Diameter [Min:0.875 in; Pressure Port Size, Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A5-11BB20L; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.12;

 

 

HPV95 VALVE PLATE HPV95 RETAINER PLATE HPV95 BALL GUIDE HPV95 DRIVE SHAFT HPV95 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

HPV95 VALVE PLATE HPV95 RETAINER PLATE HPV95 BALL GUIDE HPV95 DRIVE SHAFT HPV95 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Tokimec Vane Pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed HPV95 VALVE PLATE HPV95 RETAINER PLATE HPV95 BALL GUIDE HPV95 DRIVE SHAFT HPV95 Also Viewed

  • PC200-5 EXCAVATOR MAIN PUMP PC200-5 PISTON SHOE PC200-5 CYLINDER BLOCK PC200-5 VALVE PLATE
  • PC200-3 ROD PC200-3 SNAP RING PC200-3 BARREL WASHER PC200-3 DISK SPRING PC200-3 PILOT PUMP
  • PC200-3 SUPPORT PC200-3 YOKE ASSY PC200-3 VARIABLE SPOOL PC200-3 SUPPORT PLATE HPV90
  • PC200-3 SPACER PC200-3 SOCKET BOLT PC200-3 COIL SPRING PC200-3 SWASH PLATE HPV90 PC200-3
  • PC200-3 VALVE PLATE PC200-3 RETAINER PLATE PC200-3 DRIVE SHAFT PC200-3 RETAINER HPV90
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us