• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Tokimec Vane Pump>HPV95 EXCAVATOR MAIN PUMP PARTS HPV95 PISTON SHOE HPV95 CYLINDER BLOCK HPV95

  • HPV95 EXCAVATOR MAIN PUMP PARTS HPV95 PISTON SHOE HPV95 CYLINDER BLOCK HPV95
  • HPV95 EXCAVATOR MAIN PUMP PARTS HPV95 PISTON SHOE HPV95 CYLINDER BLOCK HPV95

HPV95 EXCAVATOR MAIN PUMP PARTS HPV95 PISTON SHOE HPV95 CYLINDER BLOCK HPV95 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

HPV95 EXCAVATOR MAIN PUMP PARTS HPV95 PISTON SHOE HPV95 CYLINDER BLOCK HPV95

category

Tokimec Vane Pump

HPV95 EXCAVATOR MAIN PUMP PARTS HPV95 PISTON SHOE HPV95 CYLINDER BLOCK HPV95 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

HPV95 EXCAVATOR MAIN PUMP PARTS HPV95 PISTON SHOE HPV95 CYLINDER BLOCK HPV95 Systems

  • 1.25 in
  • 14 Tooth Splined
  • 3525VQ
  • 1 15/16 in
  • Buna-N
  • 2500
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2500
  • 2500
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
  • 3525VQ25A21-11DD20
  • 3000
  • 3000
  • 31.5
  • 37.5
  • w/o Integral Valves
  • Outlet 135° CW from Inlet
  • Outlet 90° CW from Inlet
  • 1 in Flange
  • 1 1/4 in Flange
  • 4.12
  • 4.98

HPV95 EXCAVATOR MAIN PUMP PARTS HPV95 PISTON SHOE HPV95 CYLINDER BLOCK HPV95 Dimensions

 

Linde HPR105 retainer plate HPR105 valve plate HPR105 hydraulic pump spare partsIntegral Valve Configuration:76.0 LB; Port Type:Flange Mount; Weight:Right Hand (CW); Displacement Shaft End (cu in/revolution):3525VQ25A21-11DD20; Major Diameter [Max:3; Shaft Length:Flange; Cover End RPM [Max:N/A; Mounting:Standard Pilot; Shaft Key:1.25 in; Port Size:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
TA1515V10 ROTATING GROUP TA1515V10 HOUSING TA1515V10 WAFER PLATE TA1515V10 PINTLE COVER SEALDisplacement Shaft End (cu in/revolution):76.0 LB; Pump Series:Flange Mount; Shaft Seal Type:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:3525VQ25A21-11DD20; Shaft Type:3; Displacement Cover End (cu in/revolution):Flange; Port Orientation - Shaft End:N/A; Shaft Dia.:Standard Pilot; Weight:1.25 in; Manufacturer Part No.:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
PC120-6 MAIN PUMP SPARE PARTS PC120-6 PISTON SHOE PC120-6 CYLINDER BLOCK PC120-6Shaft End RPM [Max:76.0 LB; Manufacturer Part No.:Flange Mount; Pump Series:Right Hand (CW); Rotation:3525VQ25A21-11DD20; Max. RPM [Max:3; Cover End Flow @ RPM:Flange; Port Orientation - Shaft End:N/A; Port Orientation - Cover End:Standard Pilot; Shaft Key:1.25 in; Minor Diameter [Min:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
REXROTH A4VGT090 SADDLE BEARING SEAT A4VGT090 BARREL WASHER A4VGT090 BALL GUIDE SPACER A4VGT090 CHARGE PUMPPilot Type:76.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Port Type:Right Hand (CW); Integral Valve Configuration:3525VQ25A21-11DD20; Minor Diameter [Min:3; Mounting:Flange; Weight:N/A; Seal Material:Standard Pilot; Shaft End RPM [Max:1.25 in; Model No.:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
Rexroth A2FE10 CENTER PIN A2FE10 RETAINER PLATE A2FE10 DISC SPRING A2FE10 SOCKET BOLT A2FE10 OIL SEALMajor Diameter [Min:76.0 LB; Pressure Port Size, Shaft End:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Port Size:3525VQ25A21-11DD20; Major Diameter [Max:3; Shaft Dia.:Flange; Pilot Type:N/A; Shaft End Pressure [Max:Standard Pilot; Displacement Shaft End (cu in/revolution):1.25 in; Seal Material:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
Hitachi EX120-2 HYDRAULIC PUMP SPARE PARTS EX120-2 PISTON EX120-2 CYLINDER BLOCKRotation:76.0 LB; Integral Valve Configuration:Flange Mount; Port Size:Right Hand (CW); Shaft Dia.:3525VQ25A21-11DD20; Relief Valve Setting:3; Seal Material:Flange; Model No.:N/A; Shaft Seal Type:Standard Pilot; Max. RPM [Max:1.25 in; Minor Diameter [Min:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
HYUNDAI PC60-7 VALVE PLATE PC60-7 BALL GUIDE PC60-7 SHOE PLATE PC60-7 DRIVE SHAFT PC60-7 PINMajor Diameter [Max:76.0 LB; Manufacturer Part No.:Flange Mount; Port Size:Right Hand (CW); Shaft End RPM [Max:3525VQ25A21-11DD20; Cover End RPM [Max:3; Major Diameter [Min:Flange; Seal Material:N/A; Pump Series:Standard Pilot; Port Type:1.25 in; Minor Diameter [Min:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
Rexroth A2FO56 CENTER PIN A2FO56 RETAINER PLATE A2FO56 DISC SPRING A2FO56 SOCKET BOLT A2FO56 OIL SEALPilot Type:76.0 LB; Spline Description:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Cover End RPM [Max:3525VQ25A21-11DD20; Pump Series:3; Shaft Dia.:Flange; Displacement Shaft End (cu in/revolution):N/A; Minor Diameter:Standard Pilot; Shaft Seal Type:1.25 in; Major Diameter [Max:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
TA1919V20 VALVE 4500PSI TA1919V20 SHAFT INTERMIDIATE TA1919V20 SHAFT MAIN TA1919V20 YOKEShaft Seal Type:76.0 LB; Pressure Port Size, Shaft End:Flange Mount; Mounting:Right Hand (CW); Port Orientation - Shaft End:3525VQ25A21-11DD20; Shaft End RPM [Max:3; Cover End RPM [Max:Flange; Minor Diameter [Max:N/A; Major Diameter [Max:Standard Pilot; Model No.:1.25 in; Relief Valve Setting:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;
REXROTH A4VGT90 PISTON SHOE A4VGT90 CYLINDER BLOCK A4VGT90 RETAINER PLATE A4VGT90 BALL GUIDEDisplacement Cover End (cu in/revolution):76.0 LB; Pump Series:Flange Mount; Port Type:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:3525VQ25A21-11DD20; Manufacturer Part No.:3; Shaft Type:Flange; Port Orientation - Cover End:N/A; Max. RPM [Max:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Mounting:14 Tooth Splined; Pump Series:3525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ25A21-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:31.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):4.12; Displacement Shaft End (cu in/revolution):4.98;

 

 

HPV95 EXCAVATOR MAIN PUMP PARTS HPV95 PISTON SHOE HPV95 CYLINDER BLOCK HPV95 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

HPV95 EXCAVATOR MAIN PUMP PARTS HPV95 PISTON SHOE HPV95 CYLINDER BLOCK HPV95 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Tokimec Vane Pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed HPV95 EXCAVATOR MAIN PUMP PARTS HPV95 PISTON SHOE HPV95 CYLINDER BLOCK HPV95 Also Viewed

  • PC200-5 EXCAVATOR MAIN PUMP PC200-5 PISTON SHOE PC200-5 CYLINDER BLOCK PC200-5 VALVE PLATE
  • PC200-3 ROD PC200-3 SNAP RING PC200-3 BARREL WASHER PC200-3 DISK SPRING PC200-3 PILOT PUMP
  • PC200-3 SUPPORT PC200-3 YOKE ASSY PC200-3 VARIABLE SPOOL PC200-3 SUPPORT PLATE HPV90
  • PC200-3 SPACER PC200-3 SOCKET BOLT PC200-3 COIL SPRING PC200-3 SWASH PLATE HPV90 PC200-3
  • PC200-3 VALVE PLATE PC200-3 RETAINER PLATE PC200-3 DRIVE SHAFT PC200-3 RETAINER HPV90
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us