• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Tokimec Vane Pump>Rexroth A11VO60 SADDLE BEARING A11VO60 BEARING SEAT A11VO60 RETAINER A11VO60 SHAFT OIL SEAL

  • Rexroth A11VO60 SADDLE BEARING A11VO60 BEARING SEAT A11VO60 RETAINER A11VO60 SHAFT OIL SEAL
  • Rexroth A11VO60 SADDLE BEARING A11VO60 BEARING SEAT A11VO60 RETAINER A11VO60 SHAFT OIL SEAL

Rexroth A11VO60 SADDLE BEARING A11VO60 BEARING SEAT A11VO60 RETAINER A11VO60 SHAFT OIL SEAL MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Rexroth A11VO60 SADDLE BEARING A11VO60 BEARING SEAT A11VO60 RETAINER A11VO60 SHAFT OIL SEAL

category

Tokimec Vane Pump

Rexroth A11VO60 SADDLE BEARING A11VO60 BEARING SEAT A11VO60 RETAINER A11VO60 SHAFT OIL SEAL SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Rexroth A11VO60 SADDLE BEARING A11VO60 BEARING SEAT A11VO60 RETAINER A11VO60 SHAFT OIL SEAL Systems

  • 0.875 in
  • 13 Tooth Splined
  • V2010
  • 1 5/16 in
  • Buna-N
  • 2500
  • 0.728 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 3000
  • 2500
  • N/A
  • 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.7335 in
  • 0.7225 in
  • N/A
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • V2010-1F11S6S-11CB12
  • 2200
  • 2500
  • 9
  • 16.5
  • N/A
  • Outlet 45° CCW from Inlet
  • Outlet Inline w/Inlet
  • 1/2 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 1.19
  • 2.22

Rexroth A11VO60 SADDLE BEARING A11VO60 BEARING SEAT A11VO60 RETAINER A11VO60 SHAFT OIL SEAL Dimensions

 

Linde BMV75 hydraulic motor repair parts BMV75 cylinder block BMV75 piston shoePort Size:30.0 LB; Max. RPM [Max:Flange Mount; Manufacturer Part No.:Right Hand (CW); Shaft End Pressure [Max:V2010-1F11S6S-11CB12; Cover End RPM [Max:1 1/2; Relief Valve Setting:Flange; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Minor Diameter:0.875 in; Major Diameter [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
A10V43 BALL GUIDE A10V43 BARREL WASHER A10V43 SHOE PLATE A10V43 DRIVE SHAFT A10V43 PRESS PINRotation:30.0 LB; Cover End Flow @ RPM:Flange Mount; Pump Series:Right Hand (CW); Major Diameter [Max:V2010-1F11S6S-11CB12; Minor Diameter:1 1/2; Shaft Seal Type:Flange; GPM @ 1,800 rpm, Shaft End:N/A; GPM @ 1,800 rpm, Cover End:N/A; Shaft Dia.:0.875 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
Rexroth A2F23 CENTER PIN A2F23 SOCKET BOLT A2F23 BUSH A2F23 DISC SPRING A2F23 HALF RING A2F23 SPRING SEATRelief Valve Setting:30.0 LB; Minor Diameter [Max:Flange Mount; Cover End RPM [Max:Right Hand (CW); Port Orientation - Cover End:V2010-1F11S6S-11CB12; Shaft End Pressure [Max:1 1/2; Shaft Type:Flange; Weight:N/A; Cover End Flow @ RPM:N/A; Shaft End Flow @ RPM:0.875 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
REXROTH A4VG125 DISK SPRING A4VG125 SOCKET HEAD SCREW A4VG125 SEAL KIT A4VG125 CHARGE PUMPManufacturer Part No.:30.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Weight:Right Hand (CW); Shaft Key:V2010-1F11S6S-11CB12; Cover End Flow @ RPM:1 1/2; Mounting Flange:Flange; Pilot Type:N/A; Port Orientation - Cover End:N/A; Cover End RPM [Max:0.875 in; Relief Valve Setting:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
REXROTH A4VSO500 RETAINER PLATE A4VSO500 BALL GUIDE A4VSO500 RETAINER A4VSO500Port Orientation - Cover End:30.0 LB; Cover End RPM [Max:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Seal Material:V2010-1F11S6S-11CB12; Minor Diameter [Max:1 1/2; Port Type:Flange; Cover End Pressure [Max:N/A; Integral Valve Configuration:N/A; Weight:0.875 in; Relief Valve Setting:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
TA1515V10 ROTATING GROUP TA1515V10 HOUSING TA1515V10 WAFER PLATE TA1515V10 PINTLE COVER SEALSeal Material:30.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Pressure Port Size, Cover End:V2010-1F11S6S-11CB12; Port Size:1 1/2; Controlled Flow Rate:Flange; Shaft Key:N/A; Minor Diameter:N/A; Rotation:0.875 in; Pressure Port Size, Shaft End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
SAUER M46 PISTON SHOE M46 CYLINDER BLOCK M46 VALVE PLATE M46 RETAINER PLATE M46 PUMP SPARE PARTSRotation:30.0 LB; Shaft Type:Flange Mount; Shaft Length:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:V2010-1F11S6S-11CB12; Model No.:1 1/2; Relief Valve Setting:Flange; Shaft Key:N/A; Pump Series:N/A; Minor Diameter [Min:0.875 in; Displacement Cover End (cu in/revolution):13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
Rexroth A10VO140 A10VSO140 SWASH PLATE PISTON A10VSO140 BARREL WASHER A10VSO140 BIG BEARING A10VSO140 SMALL BEARINGShaft Length:30.0 LB; Pump Series:Flange Mount; Port Size:Right Hand (CW); Max. RPM [Max:V2010-1F11S6S-11CB12; Spline Description:1 1/2; Shaft End Flow @ RPM:Flange; Seal Material:N/A; Mounting:N/A; Model No.:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
EATON 78462 BEARING PLATE 78462 SHOE PLATE 78462 DRIVE SHAFT 78462 BEARING BUSH 78462 RETAINERManufacturer Part No.:30.0 LB; Cover End Pressure [Max:Flange Mount; Major Diameter [Max:Right Hand (CW); Port Orientation - Shaft End:V2010-1F11S6S-11CB12; Shaft End Pressure [Max:1 1/2; Shaft Dia.:Flange; Pump Series:N/A; Minor Diameter [Min:N/A; Shaft Seal Type:0.875 in; Shaft Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;
PC200-5 SUPPORT PLATE PC200-5 SNAP RING PC200-5 BARREL WASHER PC200-5 DISK SPRING PC200-5 PILOT PUMPRelief Valve Setting:30.0 LB; Major Diameter [Min:Flange Mount; Shaft Type:Right Hand (CW); Minor Diameter:V2010-1F11S6S-11CB12; Port Orientation - Cover End:1 1/2; Pump Series:Flange; Controlled Flow Rate:N/A; Integral Valve Configuration:N/A; Pressure Port Size, Cover End:0.875 in; Model No.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F11S6S-11CB12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.22;

 

 

Rexroth A11VO60 SADDLE BEARING A11VO60 BEARING SEAT A11VO60 RETAINER A11VO60 SHAFT OIL SEAL Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Rexroth A11VO60 SADDLE BEARING A11VO60 BEARING SEAT A11VO60 RETAINER A11VO60 SHAFT OIL SEAL Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Tokimec Vane Pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Rexroth A11VO60 SADDLE BEARING A11VO60 BEARING SEAT A11VO60 RETAINER A11VO60 SHAFT OIL SEAL Also Viewed

  • PC200-5 EXCAVATOR MAIN PUMP PC200-5 PISTON SHOE PC200-5 CYLINDER BLOCK PC200-5 VALVE PLATE
  • PC200-3 ROD PC200-3 SNAP RING PC200-3 BARREL WASHER PC200-3 DISK SPRING PC200-3 PILOT PUMP
  • PC200-3 SUPPORT PC200-3 YOKE ASSY PC200-3 VARIABLE SPOOL PC200-3 SUPPORT PLATE HPV90
  • PC200-3 SPACER PC200-3 SOCKET BOLT PC200-3 COIL SPRING PC200-3 SWASH PLATE HPV90 PC200-3
  • PC200-3 VALVE PLATE PC200-3 RETAINER PLATE PC200-3 DRIVE SHAFT PC200-3 RETAINER HPV90
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us