• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Tokimec Vane Pump>UCHIDA AP2D16 DISK SPRING AP2D16 COIL SPRING AP2D16 SNAP RING AP2D16 PILOT PUMP GEAR PUMP

  • UCHIDA AP2D16 DISK SPRING AP2D16 COIL SPRING AP2D16 SNAP RING AP2D16 PILOT PUMP GEAR PUMP
  • UCHIDA AP2D16 DISK SPRING AP2D16 COIL SPRING AP2D16 SNAP RING AP2D16 PILOT PUMP GEAR PUMP

UCHIDA AP2D16 DISK SPRING AP2D16 COIL SPRING AP2D16 SNAP RING AP2D16 PILOT PUMP GEAR PUMP MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

UCHIDA AP2D16 DISK SPRING AP2D16 COIL SPRING AP2D16 SNAP RING AP2D16 PILOT PUMP GEAR PUMP

category

Tokimec Vane Pump

UCHIDA AP2D16 DISK SPRING AP2D16 COIL SPRING AP2D16 SNAP RING AP2D16 PILOT PUMP GEAR PUMP SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

UCHIDA AP2D16 DISK SPRING AP2D16 COIL SPRING AP2D16 SNAP RING AP2D16 PILOT PUMP GEAR PUMP Systems

  • 0.875 in
  • Straight w/ Key
  • 2520VQ
  • 1.9375 in
  • Buna-N
  • 2700
  • N/A
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • N/A
  • 2700
  • 2700
  • N/A
  • 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm
  • 2520VQ14A5-1AD20
  • 3000
  • 3000
  • 7.5
  • 21
  • w/o Integral Valves
  • Outlet 135° CW from Inlet
  • Outlet Opposite Inlet
  • 3/4 in Flange
  • 1 in Flange
  • 1.1
  • 2.77

UCHIDA AP2D16 DISK SPRING AP2D16 COIL SPRING AP2D16 SNAP RING AP2D16 PILOT PUMP GEAR PUMP Dimensions

 

Rexroth A8VO172 RING PISTON A8VO172 CYLINDER BLOCK A8VO172 VALVE PLATE A8VO172 RETAINER PLATEShaft Key:45.0 LB; Minor Diameter [Min:Flange Mount; Manufacturer Part No.:Right Hand (CW); Cover End Flow @ RPM:2520VQ14A5-1AD20; Shaft Dia.:2 1/2; Controlled Flow Rate:Flange; Pilot Type:3/16 in; Minor Diameter:Standard Pilot; Displacement Cover End (cu in/revolution):0.875 in; Port Orientation - Shaft End:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A5-1AD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.77;
REXROTH A4VG71 BEARING SEAT A4VG71 COIL SPRING A4VG71 HOUSING A4VG71 HEAD BLOCKMinor Diameter [Min:45.0 LB; Seal Material:Flange Mount; Minor Diameter [Max:Right Hand (CW); Cover End Pressure [Max:2520VQ14A5-1AD20; Mounting:2 1/2; Shaft End Flow @ RPM:Flange; Shaft Type:3/16 in; Shaft End Pressure [Max:Standard Pilot; GPM @ 1,800 rpm, Cover End:0.875 in; Integral Valve Configuration:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A5-1AD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.77;
Rexroth A4V40 PISTON SHOE A4V40 CYLINDER BLOCK A4V40 VALVE PLATECover End RPM [Max:45.0 LB; Pressure Port Size, Shaft End:Flange Mount; Major Diameter [Min:Right Hand (CW); Displacement Cover End (cu in/revolution):2520VQ14A5-1AD20; Shaft End Flow @ RPM:2 1/2; Shaft End RPM [Max:Flange; Mounting:3/16 in; Weight:Standard Pilot; Shaft Type:0.875 in; Pump Series:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A5-1AD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.77;
SAUER PV21 COIL SPRING PV21 BLOCK SPRING PV21 SHAFT BEARING PV21 BARREL WASHER PV21 SEAL KIT PV21 SNAP RINGCover End Pressure [Max:45.0 LB; Pressure Port Size, Shaft End:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Shaft End Flow @ RPM:2520VQ14A5-1AD20; Integral Valve Configuration:2 1/2; Major Diameter [Max:Flange; Port Orientation - Shaft End:3/16 in; GPM @ 1,800 rpm, Cover End:Standard Pilot; Spline Description:0.875 in; Pressure Port Size, Cover End:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A5-1AD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.77;
Rexroth A8VO172 SPRING SEAT A8VO172 SHAFT OIL SEAL A8VO172 SEAL KIT A8VO172Minor Diameter [Max:45.0 LB; Shaft Length:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Controlled Flow Rate:2520VQ14A5-1AD20; Shaft End Flow @ RPM:2 1/2; Major Diameter [Max:Flange; Weight:3/16 in; Mounting:Standard Pilot; Port Orientation - Cover End:0.875 in; Pilot Type:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A5-1AD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.77;
Rexroth A10VO85 A10VSO85 SHAFT OIL SEAL A10VSO85 METARIS A10VSO85 HEAD BLOCK A10VSO85 SEAL KIT A10VSO85 SPRING SPLCover End RPM [Max:45.0 LB; Shaft Key:Flange Mount; Pump Series:Right Hand (CW); Minor Diameter [Min:2520VQ14A5-1AD20; Displacement Cover End (cu in/revolution):2 1/2; Model No.:Flange; Port Orientation - Cover End:3/16 in; Manufacturer Part No.:Standard Pilot; Minor Diameter:0.875 in; Relief Valve Setting:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A5-1AD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.77;
Rexroth A2FO28 RING PISTON A2FO28 RING A2FO28 CYLINDER BLOCK A2FO28 VALVE PLATE A2FO28 DRIVE SHAFTCover End Flow @ RPM:45.0 LB; Cover End Pressure [Max:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Minor Diameter [Min:2520VQ14A5-1AD20; Shaft Dia.:2 1/2; Seal Material:Flange; Minor Diameter [Max:3/16 in; Max. RPM [Max:Standard Pilot; Shaft Type:0.875 in; Pressure Port Size, Cover End:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A5-1AD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.77;
PC40-8 PUMP SPARE PARTS PC40-8 RETAINER PLATE PC40-8 BALL GUIDE PC40-8 DRIVE SHAFT PC40-8 SWASH PLATEMajor Diameter [Max:45.0 LB; Pump Series:Flange Mount; Shaft Key:Right Hand (CW); Rotation:2520VQ14A5-1AD20; Mounting Flange:2 1/2; Cover End Pressure [Max:Flange; Spline Description:3/16 in; Major Diameter [Min:Standard Pilot; Shaft Seal Type:0.875 in; Relief Valve Setting:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A5-1AD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.77;
TA1919V20 ROTATING GROUP TA1919V20 HOUSING TA1919V20 WAFER PLATE TA1919V20 PINTLE COVER SEALGPM @ 1,800 rpm, Shaft End:45.0 LB; Port Orientation - Cover End:Flange Mount; Shaft Length:Right Hand (CW); Cover End Pressure [Max:2520VQ14A5-1AD20; Pressure Port Size, Shaft End:2 1/2; Rotation:Flange; Weight:3/16 in; Minor Diameter:Standard Pilot; Displacement Shaft End (cu in/revolution):0.875 in; Cover End Flow @ RPM:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A5-1AD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.77;
REXROTH A4VG45 BALL GUIDE A4VG45 DRIVE SHAFT A4VG45 SWASH PLATE A4VG45 SADDLE BEARINGMinor Diameter [Max:45.0 LB; Seal Material:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); GPM @ 1,800 rpm, Cover End:2520VQ14A5-1AD20; Cover End Pressure [Max:2 1/2; Shaft End Pressure [Max:Flange; Pump Series:3/16 in; Port Orientation - Shaft End:Standard Pilot; Integral Valve Configuration:0.875 in; Manufacturer Part No.:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1.9375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A5-1AD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):2.77;

 

 

UCHIDA AP2D16 DISK SPRING AP2D16 COIL SPRING AP2D16 SNAP RING AP2D16 PILOT PUMP GEAR PUMP Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

UCHIDA AP2D16 DISK SPRING AP2D16 COIL SPRING AP2D16 SNAP RING AP2D16 PILOT PUMP GEAR PUMP Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Tokimec Vane Pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed UCHIDA AP2D16 DISK SPRING AP2D16 COIL SPRING AP2D16 SNAP RING AP2D16 PILOT PUMP GEAR PUMP Also Viewed

  • PC200-5 EXCAVATOR MAIN PUMP PC200-5 PISTON SHOE PC200-5 CYLINDER BLOCK PC200-5 VALVE PLATE
  • PC200-3 ROD PC200-3 SNAP RING PC200-3 BARREL WASHER PC200-3 DISK SPRING PC200-3 PILOT PUMP
  • PC200-3 SUPPORT PC200-3 YOKE ASSY PC200-3 VARIABLE SPOOL PC200-3 SUPPORT PLATE HPV90
  • PC200-3 SPACER PC200-3 SOCKET BOLT PC200-3 COIL SPRING PC200-3 SWASH PLATE HPV90 PC200-3
  • PC200-3 VALVE PLATE PC200-3 RETAINER PLATE PC200-3 DRIVE SHAFT PC200-3 RETAINER HPV90
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us