• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Tokimec Vane Pump>Rexroth A7VO80 DRIVE SHAFT A7VO80 CENTER PIN A7VO80 SOCKET BOLT A7VO80 DISC SPRING

  • Rexroth A7VO80 DRIVE SHAFT A7VO80 CENTER PIN A7VO80 SOCKET BOLT A7VO80 DISC SPRING
  • Rexroth A7VO80 DRIVE SHAFT A7VO80 CENTER PIN A7VO80 SOCKET BOLT A7VO80 DISC SPRING

Rexroth A7VO80 DRIVE SHAFT A7VO80 CENTER PIN A7VO80 SOCKET BOLT A7VO80 DISC SPRING MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Rexroth A7VO80 DRIVE SHAFT A7VO80 CENTER PIN A7VO80 SOCKET BOLT A7VO80 DISC SPRING

category

Tokimec Vane Pump

Rexroth A7VO80 DRIVE SHAFT A7VO80 CENTER PIN A7VO80 SOCKET BOLT A7VO80 DISC SPRING SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Rexroth A7VO80 DRIVE SHAFT A7VO80 CENTER PIN A7VO80 SOCKET BOLT A7VO80 DISC SPRING Systems

  • 0.875 in
  • Straight w/ Key
  • 2520VQ
  • 1 15/16 in
  • Double
  • Buna-N
  • 2500
  • N/A
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • N/A
  • 2700
  • 2500
  • N/A
  • 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 2520VQ21A8-1DD20
  • 3000
  • 3000
  • 12
  • 31.5
  • w/o Integral Valves
  • Outlet 135° CW from Inlet
  • Outlet 90° CW from Inlet
  • 3/4 in Flange
  • 1 in Flange
  • 1.7

Rexroth A7VO80 DRIVE SHAFT A7VO80 CENTER PIN A7VO80 SOCKET BOLT A7VO80 DISC SPRING Dimensions

 

HPV160 PC300-3 DRIVE SHAFT PC300-3 SWASH PLATE PC300-3 SUPPORT PC300-3 RETAINER PC300-3 YOKE ASSYShaft Type:45.0 LB; Minor Diameter:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Rotation:2520VQ21A8-1DD20; Spline Description:2.5; Cover End Pressure [Max:Flange; Shaft Key:3/16 in; Shaft End RPM [Max:Standard Pilot; Pump Series:0.875 in; Shaft Seal Type:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A8-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):4.1;
SAUER PV21 PISTON SHOE PV21 CYLINDER BLOCK PV21 VALVE PLATE PV21 RETAINER PLATE PV21 BALL GUIDE PV21 SHOE PLATEPilot Type:45.0 LB; Shaft End Pressure [Max:Flange Mount; Port Type:Right Hand (CW); Port Orientation - Cover End:2520VQ21A8-1DD20; Port Orientation - Shaft End:2.5; Minor Diameter:Flange; Shaft End Flow @ RPM:3/16 in; GPM @ 1,800 rpm, Cover End:Standard Pilot; GPM @ 1,800 rpm, Shaft End:0.875 in; Displacement Shaft End (cu in/revolution):Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A8-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):4.1;
Rexroth A2VK28 PISTON A2VK28 CYLINDER BLOCK A2VK28 VALVE PLATE A2VK28 RETAINER PLATE A2VK28 DRIVE SHAFTMajor Diameter [Min:45.0 LB; Manufacturer Part No.:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Integral Valve Configuration:2520VQ21A8-1DD20; Shaft End RPM [Max:2.5; Port Orientation - Shaft End:Flange; Shaft Dia.:3/16 in; GPM @ 1,800 rpm, Cover End:Standard Pilot; Major Diameter [Max:0.875 in; Mounting Flange:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A8-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):4.1;
EATON 6423 PISTON SHOE 6423 CYLINDER BLOCK 6423 VALVE PLATE 6423 RETAINER PLATE SPARE PARTSGPM @ 1,800 rpm, Shaft End:45.0 LB; Integral Valve Configuration:Flange Mount; Spline Description:Right Hand (CW); Controlled Flow Rate:2520VQ21A8-1DD20; Model No.:2.5; Port Orientation - Cover End:Flange; Minor Diameter:3/16 in; Major Diameter [Min:Standard Pilot; Shaft Key:0.875 in; Seal Material:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A8-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):4.1;
SAUER PV23 COIL SPRING PV23 BLOCK SPRING PV23 SHAFT BEARING PV23 BARREL WASHER PV23 SEAL KIT PV23 SNAP RINGWeight:45.0 LB; Relief Valve Setting:Flange Mount; Mounting:Right Hand (CW); Shaft Dia.:2520VQ21A8-1DD20; Seal Material:2.5; Minor Diameter:Flange; Shaft End Flow @ RPM:3/16 in; Spline Description:Standard Pilot; GPM @ 1,800 rpm, Shaft End:0.875 in; Pilot Type:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A8-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):4.1;
Linde HPR135 piston shoe HPR135 cylinder block HPR135 valve plate HPR135 retainer plateIntegral Valve Configuration:45.0 LB; Cover End RPM [Max:Flange Mount; Relief Valve Setting:Right Hand (CW); Displacement Shaft End (cu in/revolution):2520VQ21A8-1DD20; Port Orientation - Cover End:2.5; Port Orientation - Shaft End:Flange; Cover End Flow @ RPM:3/16 in; Minor Diameter:Standard Pilot; Shaft Dia.:0.875 in; Shaft End Pressure [Max:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A8-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):4.1;
PC220-7 SUPPORT PC220-7 YOKE ASSY PC220-7 PRESS PIN PC220-7 COIL SPRING PC220-7 SNAP RINGMounting Flange:45.0 LB; Integral Valve Configuration:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:2520VQ21A8-1DD20; Cover End RPM [Max:2.5; Shaft Seal Type:Flange; Cover End Flow @ RPM:3/16 in; Shaft Type:Standard Pilot; Displacement Shaft End (cu in/revolution):0.875 in; Relief Valve Setting:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A8-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):4.1;
Rexroth A7VO250 RING PISTON A7VO250 CYLINDER BLOCK A7VO250 VALVE PLATE A7VO250 RETAINER PLATEDisplacement Cover End (cu in/revolution):45.0 LB; Shaft Length:Flange Mount; Cover End RPM [Max:Right Hand (CW); Minor Diameter [Min:2520VQ21A8-1DD20; Mounting:2.5; Shaft Seal Type:Flange; Shaft Type:3/16 in; Rotation:Standard Pilot; Major Diameter [Min:0.875 in; Shaft Dia.:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A8-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):4.1;
Linde BPV50 PISTON SHOE BPV50 CYLINDER BLOCK BPV50 VALVE PLATE BPV50 RETAINER PLATEControlled Flow Rate:45.0 LB; Manufacturer Part No.:Flange Mount; Mounting Flange:Right Hand (CW); Shaft End RPM [Max:2520VQ21A8-1DD20; Pump Series:2.5; Cover End Pressure [Max:Flange; Minor Diameter [Max:3/16 in; Cover End Flow @ RPM:Standard Pilot; Shaft End Pressure [Max:0.875 in; Minor Diameter:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A8-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):4.1;
VICKERS PVB5 BARREL WASHER PVB5 BEARING PVB5 SWASH PLATE PVB5 C VALVE PVB5 CG VALVEWeight:45.0 LB; Pressure Port Size, Shaft End:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Shaft Key:2520VQ21A8-1DD20; Cover End RPM [Max:2.5; Port Orientation - Cover End:Flange; Mounting:3/16 in; GPM @ 1,800 rpm, Cover End:Standard Pilot; Major Diameter [Min:0.875 in; Model No.:Straight w/ Key; Pump Series:2520VQ; Shaft Length:1 15/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A8-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):4.1;

 

 

Rexroth A7VO80 DRIVE SHAFT A7VO80 CENTER PIN A7VO80 SOCKET BOLT A7VO80 DISC SPRING Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Rexroth A7VO80 DRIVE SHAFT A7VO80 CENTER PIN A7VO80 SOCKET BOLT A7VO80 DISC SPRING Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Tokimec Vane Pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Rexroth A7VO80 DRIVE SHAFT A7VO80 CENTER PIN A7VO80 SOCKET BOLT A7VO80 DISC SPRING Also Viewed

  • PC200-5 EXCAVATOR MAIN PUMP PC200-5 PISTON SHOE PC200-5 CYLINDER BLOCK PC200-5 VALVE PLATE
  • PC200-3 ROD PC200-3 SNAP RING PC200-3 BARREL WASHER PC200-3 DISK SPRING PC200-3 PILOT PUMP
  • PC200-3 SUPPORT PC200-3 YOKE ASSY PC200-3 VARIABLE SPOOL PC200-3 SUPPORT PLATE HPV90
  • PC200-3 SPACER PC200-3 SOCKET BOLT PC200-3 COIL SPRING PC200-3 SWASH PLATE HPV90 PC200-3
  • PC200-3 VALVE PLATE PC200-3 RETAINER PLATE PC200-3 DRIVE SHAFT PC200-3 RETAINER HPV90
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us