• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Tokimec Vane Pump>REXROTH A4VSO125 BALL GUIDE A4VSO125 SHOE PLATE A4VSO125 DRIVE SHAFT A4VSO125 RETAINER A4VSO125 METAL

  • REXROTH A4VSO125 BALL GUIDE A4VSO125 SHOE PLATE A4VSO125 DRIVE SHAFT A4VSO125 RETAINER A4VSO125 METAL
  • REXROTH A4VSO125 BALL GUIDE A4VSO125 SHOE PLATE A4VSO125 DRIVE SHAFT A4VSO125 RETAINER A4VSO125 METAL

REXROTH A4VSO125 BALL GUIDE A4VSO125 SHOE PLATE A4VSO125 DRIVE SHAFT A4VSO125 RETAINER A4VSO125 METAL MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

REXROTH A4VSO125 BALL GUIDE A4VSO125 SHOE PLATE A4VSO125 DRIVE SHAFT A4VSO125 RETAINER A4VSO125 METAL

category

Tokimec Vane Pump

REXROTH A4VSO125 BALL GUIDE A4VSO125 SHOE PLATE A4VSO125 DRIVE SHAFT A4VSO125 RETAINER A4VSO125 METAL SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

REXROTH A4VSO125 BALL GUIDE A4VSO125 SHOE PLATE A4VSO125 DRIVE SHAFT A4VSO125 RETAINER A4VSO125 METAL Systems

  • 0.875 in
  • 13 Tooth Splined
  • 2520VQ
  • 1 3/8 in
  • Double
  • Buna-N
  • 2700
  • 0.715 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2700
  • 2700
  • N/A
  • 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • N/A
  • N/A
  • 2.8
  • 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm
  • 2520VQ14A14-11BC20-LH
  • 2000
  • 3000
  • 21
  • 21
  • w/o Integral Valves
  • Outlet 45° CW from Inlet
  • Outlet 90° CCW from Inlet
  • 3/4 in Flange
  • 1 in Flange
  • 2.8

REXROTH A4VSO125 BALL GUIDE A4VSO125 SHOE PLATE A4VSO125 DRIVE SHAFT A4VSO125 RETAINER A4VSO125 METAL Dimensions

 

Linde B2PV35 DRIVE SHAFT B2PV35 CENTER PIN B2PV35 BALL GUIDE B2PV35 RETAINERIntegral Valve Configuration:45.0 LB; Pump Series:Flange Mount; Port Orientation - Shaft End:Left Hand (CCW); Controlled Flow Rate:2520VQ14A14-11BC20-LH; Minor Diameter:2.5; Shaft End Pressure [Max:Flange; Shaft Length:N/A; Minor Diameter [Min:Standard Pilot; Seal Material:0.875 in; Displacement Cover End (cu in/revolution):13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11BC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8;
SAUER MF20 HYDRAULIC MOTOR REPAIR PARTS MF21 HYDRAULIC MOTOR SPARE PARTS MF2 MF23 PISTON MOTOR PARTSCover End Flow @ RPM:45.0 LB; Shaft Type:Flange Mount; Minor Diameter [Max:Left Hand (CCW); Shaft Length:2520VQ14A14-11BC20-LH; Seal Material:2.5; Major Diameter [Max:Flange; Shaft Seal Type:N/A; Spline Description:Standard Pilot; Displacement Cover End (cu in/revolution):0.875 in; GPM @ 1,800 rpm, Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11BC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8;
TA1515V10 BEARING TA1515V10 BEARING SPACER KIT TA1515V10 COUPLING TA1515V10 CENTER BLOCKMounting:45.0 LB; Shaft End Flow @ RPM:Flange Mount; Model No.:Left Hand (CCW); Minor Diameter:2520VQ14A14-11BC20-LH; Controlled Flow Rate:2.5; Port Orientation - Cover End:Flange; Displacement Cover End (cu in/revolution):N/A; Shaft End RPM [Max:Standard Pilot; Manufacturer Part No.:0.875 in; Shaft Key:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11BC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8;
PC200-3 SUPPORT PC200-3 YOKE ASSY PC200-3 VARIABLE SPOOL PC200-3 SUPPORT PLATE HPV90Shaft End Pressure [Max:45.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Shaft Type:Left Hand (CCW); Minor Diameter:2520VQ14A14-11BC20-LH; Minor Diameter [Min:2.5; Mounting:Flange; Controlled Flow Rate:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Shaft Seal Type:0.875 in; Major Diameter [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11BC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8;
Rexroth A2FM32 CENTER PIN A2FM32 RETAINER PLATE A2FM32 DISC SPRING A2FM32 SOCKET BOLT A2FM32 OIL SEALGPM @ 1,800 rpm, Cover End:45.0 LB; Relief Valve Setting:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Max. RPM [Max:2520VQ14A14-11BC20-LH; Spline Description:2.5; Displacement Cover End (cu in/revolution):Flange; Pressure Port Size, Cover End:N/A; Shaft Seal Type:Standard Pilot; Manufacturer Part No.:0.875 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11BC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8;
Rexroth A6VM107 RING PISTON A6VM107 CYLINDER BLOCK A6VM107 VALVE PLATE M A6VM107 RETAINER PLATEPort Type:45.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Pilot Type:Left Hand (CCW); Shaft Dia.:2520VQ14A14-11BC20-LH; Shaft Type:2.5; Cover End Flow @ RPM:Flange; Minor Diameter [Max:N/A; Shaft Seal Type:Standard Pilot; Pump Series:0.875 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11BC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8;
Linde HPR135 piston shoe HPR135 cylinder block HPR135 valve plate HPR135 retainer plateCover End RPM [Max:45.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Minor Diameter:Left Hand (CCW); Shaft Type:2520VQ14A14-11BC20-LH; Pilot Type:2.5; Relief Valve Setting:Flange; Shaft End RPM [Max:N/A; Pressure Port Size, Cover End:Standard Pilot; Port Type:0.875 in; Seal Material:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11BC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8;
SAUER 90M055 BEARING SEAT 90M055 METAL 90M055 BARREL WASHER 90M055 SCREW 90M055 SNAP RING 90M055 SEAL OIL 90M055Shaft Dia.:45.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Relief Valve Setting:2520VQ14A14-11BC20-LH; Minor Diameter [Min:2.5; Rotation:Flange; Controlled Flow Rate:N/A; Weight:Standard Pilot; Shaft Seal Type:0.875 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11BC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8;
Linde B2PV50 PISTON B2PV50 CYLINDER BLOCK B2PV50 VALVE PLATE B2PV50 RETAINER PLATEMinor Diameter:45.0 LB; Pump Series:Flange Mount; Shaft Key:Left Hand (CCW); Shaft Dia.:2520VQ14A14-11BC20-LH; Shaft End RPM [Max:2.5; Mounting Flange:Flange; Minor Diameter [Min:N/A; Controlled Flow Rate:Standard Pilot; Integral Valve Configuration:0.875 in; Relief Valve Setting:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11BC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8;
Rexroth A2FE160 RING PISTON A2FE160 RING A2FE160 CYLINDER BLOCK A2FE160 VALVE PLATE A2FE160 DRIVE SHAFTMinor Diameter:45.0 LB; Cover End RPM [Max:Flange Mount; Pressure Port Size, Shaft End:Left Hand (CCW); Rotation:2520VQ14A14-11BC20-LH; Pressure Port Size, Cover End:2.5; Cover End Pressure [Max:Flange; Pump Series:N/A; Shaft Seal Type:Standard Pilot; Minor Diameter [Min:0.875 in; Mounting:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1 3/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A14-11BC20-LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):2.8;

 

 

REXROTH A4VSO125 BALL GUIDE A4VSO125 SHOE PLATE A4VSO125 DRIVE SHAFT A4VSO125 RETAINER A4VSO125 METAL Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

REXROTH A4VSO125 BALL GUIDE A4VSO125 SHOE PLATE A4VSO125 DRIVE SHAFT A4VSO125 RETAINER A4VSO125 METAL Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Tokimec Vane Pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed REXROTH A4VSO125 BALL GUIDE A4VSO125 SHOE PLATE A4VSO125 DRIVE SHAFT A4VSO125 RETAINER A4VSO125 METAL Also Viewed

  • PC200-5 EXCAVATOR MAIN PUMP PC200-5 PISTON SHOE PC200-5 CYLINDER BLOCK PC200-5 VALVE PLATE
  • PC200-3 ROD PC200-3 SNAP RING PC200-3 BARREL WASHER PC200-3 DISK SPRING PC200-3 PILOT PUMP
  • PC200-3 SUPPORT PC200-3 YOKE ASSY PC200-3 VARIABLE SPOOL PC200-3 SUPPORT PLATE HPV90
  • PC200-3 SPACER PC200-3 SOCKET BOLT PC200-3 COIL SPRING PC200-3 SWASH PLATE HPV90 PC200-3
  • PC200-3 VALVE PLATE PC200-3 RETAINER PLATE PC200-3 DRIVE SHAFT PC200-3 RETAINER HPV90
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us