• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Tokimec Vane Pump>TA19 PRESS PIN TA19 PIN RETAINER TA19 SPRING RETAINER TA19 SPRING WASHER TA19 PINTLE BEARING SPACER

  • TA19 PRESS PIN TA19 PIN RETAINER TA19 SPRING RETAINER TA19 SPRING WASHER TA19 PINTLE BEARING SPACER
  • TA19 PRESS PIN TA19 PIN RETAINER TA19 SPRING RETAINER TA19 SPRING WASHER TA19 PINTLE BEARING SPACER

TA19 PRESS PIN TA19 PIN RETAINER TA19 SPRING RETAINER TA19 SPRING WASHER TA19 PINTLE BEARING SPACER MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

TA19 PRESS PIN TA19 PIN RETAINER TA19 SPRING RETAINER TA19 SPRING WASHER TA19 PINTLE BEARING SPACER

category

Tokimec Vane Pump

TA19 PRESS PIN TA19 PIN RETAINER TA19 SPRING RETAINER TA19 SPRING WASHER TA19 PINTLE BEARING SPACER SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

TA19 PRESS PIN TA19 PIN RETAINER TA19 SPRING RETAINER TA19 SPRING WASHER TA19 PINTLE BEARING SPACER Systems

  • 1.09 in
  • 13 Tooth Splined
  • 2520V
  • 1 3/4 in
  • Buna-N
  • 1800
  • 0.7285 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 1800
  • 1800
  • N/A
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.734 in
  • 0.723 in
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 2520V21A11-11AA22R
  • 3000
  • 2500
  • 16.5
  • 31.5
  • N/A
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 3/4 in Code 61
  • 1 in Code 61
  • 2.2
  • 4.1

TA19 PRESS PIN TA19 PIN RETAINER TA19 SPRING RETAINER TA19 SPRING WASHER TA19 PINTLE BEARING SPACER Dimensions

 

Linde BMV105 motor spare parts BMV105 retainer plate BMV105 valve plate BMV105 center pinSeal Material:45.0 LB; Minor Diameter [Max:Flange Mount; Minor Diameter [Min:Right Hand (CW); Shaft End Pressure [Max:2520V21A11-11AA22R; Manufacturer Part No.:2 1/2; Shaft Seal Type:Flange; Rotation:N/A; Port Size:Standard Pilot; Pressure Port Size, Cover End:1.09 in; Mounting:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A11-11AA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1;
SAUER PV22 BEARING PLATE PV22 DRIVE SHAFT PV22 SWASH PLATE PV22 SHAFT SEAL PV22 CHARGE PUMP PV22 CONTROL VALVEPort Orientation - Shaft End:45.0 LB; Spline Description:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Mounting:2520V21A11-11AA22R; Model No.:2 1/2; Displacement Cover End (cu in/revolution):Flange; Minor Diameter [Min:N/A; Shaft End Pressure [Max:Standard Pilot; Shaft Dia.:1.09 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A11-11AA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1;
SAUER PV22 COIL SPRING PV22 BLOCK SPRING PV22 SHAFT BEARING PV22 BARREL WASHER PV22 SEAL KIT PV22 SNAP RINGMajor Diameter [Min:45.0 LB; Shaft End RPM [Max:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Seal Material:2520V21A11-11AA22R; Shaft Seal Type:2 1/2; Pilot Type:Flange; Port Size:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Manufacturer Part No.:1.09 in; Displacement Cover End (cu in/revolution):13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A11-11AA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1;
VICKERS PVE21 BACK UP RING PVE21 CV VALVE PVE21 HOUSING PVE21 BACK COVER PVE21 SHAFT OIL SEALCover End RPM [Max:45.0 LB; Seal Material:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Minor Diameter [Max:2520V21A11-11AA22R; Spline Description:2 1/2; Displacement Cover End (cu in/revolution):Flange; Integral Valve Configuration:N/A; Weight:Standard Pilot; Cover End Flow @ RPM:1.09 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A11-11AA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1;
Rexroth A8VO200 RING PISTON A8VO200 CYLINDER BLOCK A8VO200 VALVE PLATE A8VO200 RETAINER PLATEControlled Flow Rate:45.0 LB; Pump Series:Flange Mount; Minor Diameter:Right Hand (CW); Max. RPM [Max:2520V21A11-11AA22R; Shaft Length:2 1/2; Model No.:Flange; Shaft End Flow @ RPM:N/A; Mounting:Standard Pilot; Major Diameter [Min:1.09 in; Shaft Seal Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A11-11AA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1;
SAUER 90R042 DRIVE SHAFT 90R042 CAM ROCKER 90R042 SPRING OF BARREL 90R042 RETAINER 90R042 SADDLE BEARING 90R042Cover End RPM [Max:45.0 LB; Port Size:Flange Mount; Rotation:Right Hand (CW); Cover End Pressure [Max:2520V21A11-11AA22R; Weight:2 1/2; Displacement Cover End (cu in/revolution):Flange; Spline Description:N/A; Pilot Type:Standard Pilot; Max. RPM [Max:1.09 in; Shaft Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A11-11AA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1;
REXROTH A4VGT090 SADDLE BEARING SEAT A4VGT090 BARREL WASHER A4VGT090 BALL GUIDE SPACER A4VGT090 CHARGE PUMPGPM @ 1,800 rpm, Shaft End:45.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Rotation:Right Hand (CW); Port Size:2520V21A11-11AA22R; Mounting Flange:2 1/2; Shaft End Pressure [Max:Flange; Port Orientation - Shaft End:N/A; Integral Valve Configuration:Standard Pilot; Displacement Shaft End (cu in/revolution):1.09 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A11-11AA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1;
Linde HPR130 SNAP RING HPR130 SMALL BEARING HPR130 BIG BEARING HPR130 SEAL OILSeal Material:45.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Minor Diameter [Max:Right Hand (CW); Cover End Flow @ RPM:2520V21A11-11AA22R; Port Type:2 1/2; Controlled Flow Rate:Flange; Shaft Dia.:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Pressure Port Size, Cover End:1.09 in; Max. RPM [Max:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A11-11AA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1;
VICKERS PVH57 PISTON SHOE PVH57 CYLINDER BLOCK PVH57 RETAINER PLATE PVH57 VALVE PLATE PVH57 DRIVE SHAFTRotation:45.0 LB; Major Diameter [Min:Flange Mount; Shaft Key:Right Hand (CW); Relief Valve Setting:2520V21A11-11AA22R; Integral Valve Configuration:2 1/2; Model No.:Flange; Displacement Shaft End (cu in/revolution):N/A; Port Size:Standard Pilot; Manufacturer Part No.:1.09 in; Shaft Seal Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A11-11AA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1;
HPV160 PC400-5 DRIVE SHAFT PC400-5 SWASH PLATE PC400-5 SUPPORT PC400-5 YOKE ASSY PC400-5 SPACERPort Size:45.0 LB; Mounting Flange:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Shaft End Pressure [Max:2520V21A11-11AA22R; Cover End RPM [Max:2 1/2; Port Type:Flange; Model No.:N/A; Pilot Type:Standard Pilot; Pump Series:1.09 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A11-11AA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.1;

 

 

TA19 PRESS PIN TA19 PIN RETAINER TA19 SPRING RETAINER TA19 SPRING WASHER TA19 PINTLE BEARING SPACER Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

TA19 PRESS PIN TA19 PIN RETAINER TA19 SPRING RETAINER TA19 SPRING WASHER TA19 PINTLE BEARING SPACER Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Tokimec Vane Pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed TA19 PRESS PIN TA19 PIN RETAINER TA19 SPRING RETAINER TA19 SPRING WASHER TA19 PINTLE BEARING SPACER Also Viewed

  • PC200-5 EXCAVATOR MAIN PUMP PC200-5 PISTON SHOE PC200-5 CYLINDER BLOCK PC200-5 VALVE PLATE
  • PC200-3 ROD PC200-3 SNAP RING PC200-3 BARREL WASHER PC200-3 DISK SPRING PC200-3 PILOT PUMP
  • PC200-3 SUPPORT PC200-3 YOKE ASSY PC200-3 VARIABLE SPOOL PC200-3 SUPPORT PLATE HPV90
  • PC200-3 SPACER PC200-3 SOCKET BOLT PC200-3 COIL SPRING PC200-3 SWASH PLATE HPV90 PC200-3
  • PC200-3 VALVE PLATE PC200-3 RETAINER PLATE PC200-3 DRIVE SHAFT PC200-3 RETAINER HPV90
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us