• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Tokimec Vane Pump>SAUER MMF044 BALL GUIDE MMF044 BARREL WASHER MMF044 PRESS PIN MMF044 COIL SPRING

  • SAUER MMF044 BALL GUIDE MMF044 BARREL WASHER MMF044 PRESS PIN MMF044 COIL SPRING
  • SAUER MMF044 BALL GUIDE MMF044 BARREL WASHER MMF044 PRESS PIN MMF044 COIL SPRING

SAUER MMF044 BALL GUIDE MMF044 BARREL WASHER MMF044 PRESS PIN MMF044 COIL SPRING MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

SAUER MMF044 BALL GUIDE MMF044 BARREL WASHER MMF044 PRESS PIN MMF044 COIL SPRING

category

Tokimec Vane Pump

SAUER MMF044 BALL GUIDE MMF044 BARREL WASHER MMF044 PRESS PIN MMF044 COIL SPRING SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

SAUER MMF044 BALL GUIDE MMF044 BARREL WASHER MMF044 PRESS PIN MMF044 COIL SPRING Systems

  • 0.875 in
  • 13 Tooth Splined
  • V2020
  • 1 5/16 in
  • Buna-N
  • 3000
  • 0.728 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2500
  • 3000
  • N/A
  • 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.7335 in
  • 0.7225 in
  • N/A
  • 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm
  • V2020-1F7S7S-11DD30
  • 2500
  • 2500
  • 10.5
  • 10.5
  • N/A
  • Outlet 90° CW from Inlet
  • Outlet 90° CW from Inlet
  • 3/4 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 1.39
  • 1.39

SAUER MMF044 BALL GUIDE MMF044 BARREL WASHER MMF044 PRESS PIN MMF044 COIL SPRING Dimensions

 

Rexroth A11VO75 CYLINDER BLOCK A11VO75 PISTON SHOE A11VO75 VALVE PLATE A11VO75 RETAINER PLATEShaft Key:35.0 LB; Cover End Pressure [Max:Flange Mount; Integral Valve Configuration:Right Hand (CW); Spline Description:V2020-1F7S7S-11DD30; Pressure Port Size, Shaft End:2; Major Diameter [Min:Flange; Mounting:N/A; Shaft Type:N/A; Shaft Dia.:0.875 in; Seal Material:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39;
Rexroth A8VO55 hydraulic piston pump back cover repair Rexroth A8VO80 hydraulic piston pump back cover repairIntegral Valve Configuration:35.0 LB; Shaft End RPM [Max:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Rotation:V2020-1F7S7S-11DD30; Weight:2; Spline Description:Flange; Pressure Port Size, Cover End:N/A; Shaft Length:N/A; Shaft End Flow @ RPM:0.875 in; Mounting Flange:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39;
PC220-7 RETAINER PLATE PC220-7 BALL GUIDE PC220-7 DRIVE SHAFT PC220-7 SWASH PLATE PC220-7Displacement Shaft End (cu in/revolution):35.0 LB; Shaft Key:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Port Size:V2020-1F7S7S-11DD30; Pilot Type:2; Mounting Flange:Flange; Shaft End RPM [Max:N/A; Major Diameter [Max:N/A; Cover End Flow @ RPM:0.875 in; Shaft End Flow @ RPM:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39;
Rexroth A10VO45 A10VSO45 METAL A10VSO45 PRESS PIN A10VSO45 COIL SPRING A10VSO45 SNAP RING A10VSO45 DFR VALVEShaft End Pressure [Max:35.0 LB; Pilot Type:Flange Mount; Mounting Flange:Right Hand (CW); Shaft End RPM [Max:V2020-1F7S7S-11DD30; GPM @ 1,800 rpm, Shaft End:2; Pressure Port Size, Shaft End:Flange; Shaft Seal Type:N/A; Minor Diameter [Max:N/A; Port Type:0.875 in; Minor Diameter [Min:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39;
PC60-7 VALVE PLATE PC60-7 RETAINER PLATE PC60-7 BALL GUIDE PC60-7 DRIVE SHAFT HPV75Major Diameter [Max:35.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Mounting:V2020-1F7S7S-11DD30; Seal Material:2; Minor Diameter [Max:Flange; Shaft End Flow @ RPM:N/A; Shaft Seal Type:N/A; Cover End Flow @ RPM:0.875 in; Major Diameter [Min:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39;
PC40-8 MAIN PUMP REPAIR PARTS PC40-8 PISTON SHOE PC40-8 CYLINDER BLOCK PC40-8 VALVE PLATE RDisplacement Cover End (cu in/revolution):35.0 LB; Shaft End RPM [Max:Flange Mount; Rotation:Right Hand (CW); Cover End RPM [Max:V2020-1F7S7S-11DD30; Major Diameter [Max:2; Major Diameter [Min:Flange; Shaft Type:N/A; Weight:N/A; Minor Diameter [Min:0.875 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39;
Rexroth A2FM500 RING PISTON A2FM500 RING A2FM500 CYLINDER BLOCK A2FM500 VALVE PLATE M A2FM500 DRIVE SHAFTShaft Dia.:35.0 LB; Seal Material:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Controlled Flow Rate:V2020-1F7S7S-11DD30; Rotation:2; Max. RPM [Max:Flange; Cover End Pressure [Max:N/A; Manufacturer Part No.:N/A; Shaft Type:0.875 in; Displacement Cover End (cu in/revolution):13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39;
TA1515V10 SPRING PIN TA1515V10 CENTER BLOCK PIN TA1515V10 GASKET TA1515V10 COVER PLATEControlled Flow Rate:35.0 LB; Shaft End Pressure [Max:Flange Mount; Seal Material:Right Hand (CW); Manufacturer Part No.:V2020-1F7S7S-11DD30; Weight:2; Relief Valve Setting:Flange; Major Diameter [Min:N/A; Port Orientation - Shaft End:N/A; Integral Valve Configuration:0.875 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39;
Rexroth A10VO63 A10VSO63 SHAFT OIL SEAL A10VSO63 METARIS A10VSO63 HEAD BLOCK A10VSO63 SEAL KIT A10VSO63 SPRING SPLPort Type:35.0 LB; Max. RPM [Max:Flange Mount; Shaft Key:Right Hand (CW); Pressure Port Size, Cover End:V2020-1F7S7S-11DD30; Shaft Type:2; Shaft End RPM [Max:Flange; Cover End Pressure [Max:N/A; Minor Diameter [Max:N/A; Model No.:0.875 in; Seal Material:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39;
Rexroth A2FO32 RING PISTON A2FO32 RING A2FO32 CYLINDER BLOCK A2FO32 VALVE PLATE A2FO32 DRIVE SHAFTSpline Description:35.0 LB; Cover End Pressure [Max:Flange Mount; Port Type:Right Hand (CW); Weight:V2020-1F7S7S-11DD30; Pilot Type:2; Port Orientation - Shaft End:Flange; Shaft End Flow @ RPM:N/A; Port Size:N/A; Manufacturer Part No.:0.875 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2500; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F7S7S-11DD30; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):1.39;

 

 

SAUER MMF044 BALL GUIDE MMF044 BARREL WASHER MMF044 PRESS PIN MMF044 COIL SPRING Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

SAUER MMF044 BALL GUIDE MMF044 BARREL WASHER MMF044 PRESS PIN MMF044 COIL SPRING Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Tokimec Vane Pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed SAUER MMF044 BALL GUIDE MMF044 BARREL WASHER MMF044 PRESS PIN MMF044 COIL SPRING Also Viewed

  • PC200-5 EXCAVATOR MAIN PUMP PC200-5 PISTON SHOE PC200-5 CYLINDER BLOCK PC200-5 VALVE PLATE
  • PC200-3 ROD PC200-3 SNAP RING PC200-3 BARREL WASHER PC200-3 DISK SPRING PC200-3 PILOT PUMP
  • PC200-3 SUPPORT PC200-3 YOKE ASSY PC200-3 VARIABLE SPOOL PC200-3 SUPPORT PLATE HPV90
  • PC200-3 SPACER PC200-3 SOCKET BOLT PC200-3 COIL SPRING PC200-3 SWASH PLATE HPV90 PC200-3
  • PC200-3 VALVE PLATE PC200-3 RETAINER PLATE PC200-3 DRIVE SHAFT PC200-3 RETAINER HPV90
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us