• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Tokimec Vane Pump>SAUER SMF22 BLOCK SPRING SMF22 SHAFT BEARING MF22 BARREL WASHER MF22 SEAL KIT MF22 SNAP RING MF22 HYDRAULIC MOTOR PARTS

  • SAUER SMF22 BLOCK SPRING SMF22 SHAFT BEARING MF22 BARREL WASHER MF22 SEAL KIT MF22 SNAP RING MF22 HYDRAULIC MOTOR PARTS
  • SAUER SMF22 BLOCK SPRING SMF22 SHAFT BEARING MF22 BARREL WASHER MF22 SEAL KIT MF22 SNAP RING MF22 HYDRAULIC MOTOR PARTS

SAUER SMF22 BLOCK SPRING SMF22 SHAFT BEARING MF22 BARREL WASHER MF22 SEAL KIT MF22 SNAP RING MF22 HYDRAULIC MOTOR PARTS MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

SAUER SMF22 BLOCK SPRING SMF22 SHAFT BEARING MF22 BARREL WASHER MF22 SEAL KIT MF22 SNAP RING MF22 HYDRAULIC MOTOR PARTS

category

Tokimec Vane Pump

SAUER SMF22 BLOCK SPRING SMF22 SHAFT BEARING MF22 BARREL WASHER MF22 SEAL KIT MF22 SNAP RING MF22 HYDRAULIC MOTOR PARTS SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

SAUER SMF22 BLOCK SPRING SMF22 SHAFT BEARING MF22 BARREL WASHER MF22 SEAL KIT MF22 SNAP RING MF22 HYDRAULIC MOTOR PARTS Systems

  • 0.875 in
  • 13 Tooth Splined
  • V2020
  • 1 5/16 in
  • Buna-N
  • 2400
  • 0.728 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2800
  • 2400
  • N/A
  • 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.7335 in
  • 0.7225 in
  • N/A
  • 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm
  • V2020-1F13S8S-11CC30LH
  • 2500
  • 2200
  • 12
  • 19.5
  • N/A
  • Outlet Inline w/Inlet
  • Outlet Inline w/Inlet
  • 3/4 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 1.62
  • 2.59

SAUER SMF22 BLOCK SPRING SMF22 SHAFT BEARING MF22 BARREL WASHER MF22 SEAL KIT MF22 SNAP RING MF22 HYDRAULIC MOTOR PARTS Dimensions

 

PC60-6 SWING MOTOR REPAIR PARTS PC60-6 PISTON PC60-6 CYLINDER BLOCK PC60-6 VALVE PLATE PC60-6Minor Diameter:35.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Shaft Length:Left Hand (CCW); Major Diameter [Min:V2020-1F13S8S-11CC30LH; Weight:2; Integral Valve Configuration:Flange; Shaft Dia.:N/A; Seal Material:N/A; Pump Series:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F13S8S-11CC30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Inline w/Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.59;
Rexroth A8V160 SOCKET BOLT A8V160 DISC SPRING A8V160 HALF RING A8V160 COIL SPRING A8V160 OIL SEAL A8V160 HEAD BLOCKMajor Diameter [Min:35.0 LB; Shaft Type:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Port Size:V2020-1F13S8S-11CC30LH; Mounting Flange:2; Spline Description:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Port Type:N/A; Controlled Flow Rate:0.875 in; Major Diameter [Max:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F13S8S-11CC30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Inline w/Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.59;
PC60-7 EXCAVATOR MAIN PUMP PC60-7 PISTON SHOE PC60-7 CYLINDER BLOCK HPV75Shaft Length:35.0 LB; Manufacturer Part No.:Flange Mount; Cover End Pressure [Max:Left Hand (CCW); Displacement Cover End (cu in/revolution):V2020-1F13S8S-11CC30LH; Pressure Port Size, Cover End:2; Shaft End Pressure [Max:Flange; Port Type:N/A; Major Diameter [Max:N/A; Max. RPM [Max:0.875 in; Seal Material:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F13S8S-11CC30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Inline w/Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.59;
SAUER PV90L130 DRIVE SHAFT PV90L130 CAM ROCKER PV90L130 SPRING OF BARREL PV90L130 RETAINER PV90L130 SADDLE BEARINGShaft End RPM [Max:35.0 LB; Weight:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Manufacturer Part No.:V2020-1F13S8S-11CC30LH; Pressure Port Size, Shaft End:2; Shaft Key:Flange; GPM @ 1,800 rpm, Cover End:N/A; Pilot Type:N/A; Shaft Type:0.875 in; Shaft End Flow @ RPM:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F13S8S-11CC30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Inline w/Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.59;
EX200-5 STEEL PLATE EX200-5 VALVE PLATE SOCKET EX200-5 SNAG RING EX200-5 BIG BEARINGMounting:35.0 LB; Model No.:Flange Mount; Max. RPM [Max:Left Hand (CCW); Pressure Port Size, Shaft End:V2020-1F13S8S-11CC30LH; Cover End Pressure [Max:2; Displacement Cover End (cu in/revolution):Flange; Shaft Type:N/A; Weight:N/A; Displacement Shaft End (cu in/revolution):0.875 in; Relief Valve Setting:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F13S8S-11CC30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Inline w/Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.59;
Linde BPR50 PISTON BPR50 CYLINDER BLOCK BPR50 VALVE PLATE BPR50 RETAINER PLATERotation:35.0 LB; Port Type:Flange Mount; Displacement Shaft End (cu in/revolution):Left Hand (CCW); Port Orientation - Cover End:V2020-1F13S8S-11CC30LH; Shaft Key:2; GPM @ 1,800 rpm, Shaft End:Flange; Spline Description:N/A; Minor Diameter:N/A; Relief Valve Setting:0.875 in; Pressure Port Size, Shaft End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F13S8S-11CC30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Inline w/Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.59;
HPV160 PC300-3 DRIVE SHAFT PC300-3 SWASH PLATE PC300-3 SUPPORT PC300-3 RETAINER PC300-3 YOKE ASSYControlled Flow Rate:35.0 LB; Relief Valve Setting:Flange Mount; Minor Diameter [Min:Left Hand (CCW); Pressure Port Size, Shaft End:V2020-1F13S8S-11CC30LH; Port Orientation - Cover End:2; Displacement Cover End (cu in/revolution):Flange; Weight:N/A; Pressure Port Size, Cover End:N/A; Shaft Key:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F13S8S-11CC30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Inline w/Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.59;
Rexroth A10VO63 HYDRAULIC PUMP A10VSO63 SEAL KIT A10VSO63 DRIVE SHAFT SEAL A10VSO63 OIL SEAL A10VSO63Displacement Cover End (cu in/revolution):35.0 LB; Major Diameter [Max:Flange Mount; Port Type:Left Hand (CCW); Shaft Key:V2020-1F13S8S-11CC30LH; Max. RPM [Max:2; Major Diameter [Min:Flange; Manufacturer Part No.:N/A; Shaft Type:N/A; Cover End Pressure [Max:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F13S8S-11CC30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Inline w/Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.59;
VICKERS PVB15 PISTON SHOE PVB15 CYLINDER BLOCK PVB15 VALVE PLATE PVB15 SHOE PLATE PVB15 BACK COVERShaft Type:35.0 LB; Pump Series:Flange Mount; Cover End Pressure [Max:Left Hand (CCW); Controlled Flow Rate:V2020-1F13S8S-11CC30LH; Spline Description:2; GPM @ 1,800 rpm, Cover End:Flange; Cover End RPM [Max:N/A; Minor Diameter:N/A; Shaft Seal Type:0.875 in; Rotation:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F13S8S-11CC30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Inline w/Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.59;
SAUER M46 METAL M46 PRESS PIN M46 CHARGE PUMP M46 HYDRAULIC PISTON PUMP REPAIR PARTSDisplacement Shaft End (cu in/revolution):35.0 LB; Cover End RPM [Max:Flange Mount; Major Diameter [Min:Left Hand (CCW); Shaft Length:V2020-1F13S8S-11CC30LH; Shaft End Pressure [Max:2; Seal Material:Flange; Model No.:N/A; Shaft End Flow @ RPM:N/A; GPM @ 1,800 rpm, Cover End:0.875 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:V2020; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F13S8S-11CC30LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet Inline w/Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.62; Displacement Shaft End (cu in/revolution):2.59;

 

 

SAUER SMF22 BLOCK SPRING SMF22 SHAFT BEARING MF22 BARREL WASHER MF22 SEAL KIT MF22 SNAP RING MF22 HYDRAULIC MOTOR PARTS Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

SAUER SMF22 BLOCK SPRING SMF22 SHAFT BEARING MF22 BARREL WASHER MF22 SEAL KIT MF22 SNAP RING MF22 HYDRAULIC MOTOR PARTS Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Tokimec Vane Pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed SAUER SMF22 BLOCK SPRING SMF22 SHAFT BEARING MF22 BARREL WASHER MF22 SEAL KIT MF22 SNAP RING MF22 HYDRAULIC MOTOR PARTS Also Viewed

  • PC200-5 EXCAVATOR MAIN PUMP PC200-5 PISTON SHOE PC200-5 CYLINDER BLOCK PC200-5 VALVE PLATE
  • PC200-3 ROD PC200-3 SNAP RING PC200-3 BARREL WASHER PC200-3 DISK SPRING PC200-3 PILOT PUMP
  • PC200-3 SUPPORT PC200-3 YOKE ASSY PC200-3 VARIABLE SPOOL PC200-3 SUPPORT PLATE HPV90
  • PC200-3 SPACER PC200-3 SOCKET BOLT PC200-3 COIL SPRING PC200-3 SWASH PLATE HPV90 PC200-3
  • PC200-3 VALVE PLATE PC200-3 RETAINER PLATE PC200-3 DRIVE SHAFT PC200-3 RETAINER HPV90
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us