• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Tokimec Vane Pump>Hitachi HPV050 HYDRAULIC PUMP SPARE PARTS HEAD BLOCK HPV050 BACK COVER HPV050 DRIVE SHAFT

  • Hitachi HPV050 HYDRAULIC PUMP SPARE PARTS HEAD BLOCK HPV050 BACK COVER HPV050 DRIVE SHAFT
  • Hitachi HPV050 HYDRAULIC PUMP SPARE PARTS HEAD BLOCK HPV050 BACK COVER HPV050 DRIVE SHAFT

Hitachi HPV050 HYDRAULIC PUMP SPARE PARTS HEAD BLOCK HPV050 BACK COVER HPV050 DRIVE SHAFT MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Hitachi HPV050 HYDRAULIC PUMP SPARE PARTS HEAD BLOCK HPV050 BACK COVER HPV050 DRIVE SHAFT

category

Tokimec Vane Pump

Hitachi HPV050 HYDRAULIC PUMP SPARE PARTS HEAD BLOCK HPV050 BACK COVER HPV050 DRIVE SHAFT SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Hitachi HPV050 HYDRAULIC PUMP SPARE PARTS HEAD BLOCK HPV050 BACK COVER HPV050 DRIVE SHAFT Systems

  • 1.09 in
  • 13 Tooth Splined
  • 2520V
  • 1 3/4 in
  • Buna-N
  • 1800
  • 0.7285 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 1800
  • 1800
  • N/A
  • 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.734 in
  • 0.723 in
  • N/A
  • 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
  • 2520V12A8-11CA22R
  • 3000
  • 2500
  • 12
  • 18
  • N/A
  • Outlet 135° CCW from Inlet
  • Outlet Inline w/Inlet
  • 3/4 in Code 61
  • 1 in Code 61
  • 1.7
  • 2.5

Hitachi HPV050 HYDRAULIC PUMP SPARE PARTS HEAD BLOCK HPV050 BACK COVER HPV050 DRIVE SHAFT Dimensions

 

VICKERS PVB15 PISTON SHOE PVB15 CYLINDER BLOCK PVB15 VALVE PLATE PVB15 SHOE PLATE PVB15 BACK COVERGPM @ 1,800 rpm, Shaft End:45.0 LB; Cover End Flow @ RPM:Flange Mount; Mounting:Right Hand (CW); Shaft End Flow @ RPM:2520V12A8-11CA22R; Major Diameter [Max:2 1/2; Integral Valve Configuration:Flange; Shaft Dia.:N/A; Port Size:Standard Pilot; Weight:1.09 in; Pressure Port Size, Shaft End:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11CA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
VICKERS PVE19 BALL GUIDE PVE19 DRIVE SHAFT PVE19 COIL SPRING PVE19 PRESS PIN PVE19 SNAP RINGPort Orientation - Cover End:45.0 LB; Spline Description:Flange Mount; Minor Diameter:Right Hand (CW); Minor Diameter [Min:2520V12A8-11CA22R; Shaft End Pressure [Max:2 1/2; Shaft Dia.:Flange; Shaft Length:N/A; Manufacturer Part No.:Standard Pilot; Pump Series:1.09 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11CA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
Rexroth A2FM56 CENTER PIN A2FM56 RETAINER PLATE A2FM56 DISC SPRING A2FM56 SOCKET BOLT A2FM56 OIL SEALPort Size:45.0 LB; Relief Valve Setting:Flange Mount; Model No.:Right Hand (CW); Minor Diameter [Max:2520V12A8-11CA22R; Shaft End Pressure [Max:2 1/2; Pilot Type:Flange; Cover End Flow @ RPM:N/A; Max. RPM [Max:Standard Pilot; Minor Diameter:1.09 in; Pump Series:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11CA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
Vickers MFE19 valve plate MFE19 shoe plate MFE19 drive shaft MFE19 housing MFE19Pilot Type:45.0 LB; Max. RPM [Max:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Spline Description:2520V12A8-11CA22R; Cover End Flow @ RPM:2 1/2; Rotation:Flange; Cover End RPM [Max:N/A; Major Diameter [Min:Standard Pilot; Shaft Seal Type:1.09 in; Minor Diameter [Min:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11CA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
Rexoth A10VG45 SADDLE BEARING A10VG45 BEARING SEAT A10VG45 COIL SPRING A10VG45 SNAP RINGControlled Flow Rate:45.0 LB; Shaft End RPM [Max:Flange Mount; Manufacturer Part No.:Right Hand (CW); Integral Valve Configuration:2520V12A8-11CA22R; Cover End RPM [Max:2 1/2; Minor Diameter [Min:Flange; Rotation:N/A; Max. RPM [Max:Standard Pilot; Port Type:1.09 in; Port Orientation - Cover End:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11CA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
Rexroth A8VO140 SPRING SEAT A8VO140 SHAFT OIL SEAL A8VO140 PILOT PUMP SEAL KITControlled Flow Rate:45.0 LB; Weight:Flange Mount; Port Size:Right Hand (CW); Cover End RPM [Max:2520V12A8-11CA22R; Max. RPM [Max:2 1/2; Seal Material:Flange; Cover End Pressure [Max:N/A; Minor Diameter:Standard Pilot; Shaft End Pressure [Max:1.09 in; Displacement Cover End (cu in/revolution):13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11CA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
Rexroth A10VO28 HYDRAULIC PUMP A10VSO28 SEAL KIT A10VSO28 DRIVE SHAFT SEAL A10VSO28 OIL SEAL A10VSO28Minor Diameter [Max:45.0 LB; Cover End Pressure [Max:Flange Mount; Model No.:Right Hand (CW); Port Type:2520V12A8-11CA22R; Shaft Type:2 1/2; Displacement Cover End (cu in/revolution):Flange; Mounting:N/A; Shaft Key:Standard Pilot; Shaft End Flow @ RPM:1.09 in; Relief Valve Setting:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11CA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
PC56 EXCAVATOR BALL GUIDE PC56 PRESS PIN PC56 DRIVE SHAFT PC56 SWASH PLATE PISTON PC56 PUMP SPARE PARTSShaft End RPM [Max:45.0 LB; Cover End Pressure [Max:Flange Mount; Weight:Right Hand (CW); Minor Diameter:2520V12A8-11CA22R; Integral Valve Configuration:2 1/2; Port Orientation - Cover End:Flange; Shaft End Pressure [Max:N/A; Shaft Seal Type:Standard Pilot; GPM @ 1,800 rpm, Cover End:1.09 in; Shaft Length:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11CA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
Linde HPV55T RIVE SHAFT HPV55T COIL SPRING HPV55T SNAP RING HPV55T RETAINER HPV55TGPM @ 1,800 rpm, Shaft End:45.0 LB; Minor Diameter [Max:Flange Mount; Cover End RPM [Max:Right Hand (CW); Rotation:2520V12A8-11CA22R; Mounting Flange:2 1/2; Major Diameter [Min:Flange; Port Orientation - Cover End:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Shaft End RPM [Max:1.09 in; Pump Series:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11CA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;
HITACHI EX300-3 PISTON EX300-3 CYLINDER BLOCK EX300-3 VALVE PLATE EX300-3 CENTER PINMinor Diameter [Max:45.0 LB; Pressure Port Size, Cover End:Flange Mount; Port Size:Right Hand (CW); Shaft End Pressure [Max:2520V12A8-11CA22R; Minor Diameter:2 1/2; Shaft Dia.:Flange; Shaft Type:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Pump Series:1.09 in; Shaft End Flow @ RPM:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A8-11CA22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:12; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):1.7; Displacement Shaft End (cu in/revolution):2.5;

 

 

Hitachi HPV050 HYDRAULIC PUMP SPARE PARTS HEAD BLOCK HPV050 BACK COVER HPV050 DRIVE SHAFT Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Hitachi HPV050 HYDRAULIC PUMP SPARE PARTS HEAD BLOCK HPV050 BACK COVER HPV050 DRIVE SHAFT Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Tokimec Vane Pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Hitachi HPV050 HYDRAULIC PUMP SPARE PARTS HEAD BLOCK HPV050 BACK COVER HPV050 DRIVE SHAFT Also Viewed

  • PC200-5 EXCAVATOR MAIN PUMP PC200-5 PISTON SHOE PC200-5 CYLINDER BLOCK PC200-5 VALVE PLATE
  • PC200-3 ROD PC200-3 SNAP RING PC200-3 BARREL WASHER PC200-3 DISK SPRING PC200-3 PILOT PUMP
  • PC200-3 SUPPORT PC200-3 YOKE ASSY PC200-3 VARIABLE SPOOL PC200-3 SUPPORT PLATE HPV90
  • PC200-3 SPACER PC200-3 SOCKET BOLT PC200-3 COIL SPRING PC200-3 SWASH PLATE HPV90 PC200-3
  • PC200-3 VALVE PLATE PC200-3 RETAINER PLATE PC200-3 DRIVE SHAFT PC200-3 RETAINER HPV90
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us