Home>Products>Excavator Undercarriage parts>SHANTUI ripper shank.SHANTUI bulldozer TY130 triple frame ripper, shantui bulldozer sd22 single shank ripper
SHANTUI ripper shank.SHANTUI bulldozer TY130 triple frame ripper, shantui bulldozer sd22 single shank ripper MODELS
Need a CAD or 3D Model?
SHANTUI ripper shank.SHANTUI bulldozer TY130 triple frame ripper, shantui bulldozer sd22 single shank ripper
category
Excavator Undercarriage parts
SHANTUI ripper shank.SHANTUI bulldozer TY130 triple frame ripper, shantui bulldozer sd22 single shank ripper SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
SHANTUI ripper shank.SHANTUI bulldozer TY130 triple frame ripper, shantui bulldozer sd22 single shank ripper Technical information
- 0.875 in
- 13 Tooth Splined
- 2520VQ
- 1.375 in
- Buna-N
- 2700
- 0.715 in
- SAE B, 2 Bolt
- Single Shaft Seal
- 16/32
- 2700
- 2700
- N/A
- 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
- 0.873 in
- 0.872 in
- N/A
- N/A
- N/A
- 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm
- 2520VQ14A12-11CC20
- 2300
- 3000
- 18
- 21
- w/o Integral Valves
- Outlet 45° CW from Inlet
- Outlet Inline w/Inlet
- 3/4 in Flange
- 1 in Flange
- 2.41
- 2.77
SHANTUI ripper shank.SHANTUI bulldozer TY130 triple frame ripper, shantui bulldozer sd22 single shank ripper Products and services
excavator motor,travel motor for daewoo,kobelco,kubota parts,kato, parts | Pressure Port Size, Cover End:45.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Model No.:Right Hand (CW); Cover End RPM [Max:2520VQ14A12-11CC20; Spline Description:2 1/2; Pilot Type:Flange; Minor Diameter [Max:N/A; Pressure Port Size, Shaft End:Standard Pilot; Mounting Flange:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77; |
cab EX20, EX30, EX33, EX50, EX60, EX60LC, EX60LCK, EX70, EX70LCK, EX70LCK-5, EX70LCKBL, EX75, EX75UR, EX75US | Spline Description:45.0 LB; Cover End RPM [Max:Flange Mount; Rotation:Right Hand (CW); Minor Diameter:2520VQ14A12-11CC20; Major Diameter [Min:2 1/2; Pump Series:Flange; Pilot Type:N/A; Pressure Port Size, Cover End:Standard Pilot; Integral Valve Configuration:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77; |
excavator travel motor ,excavator motor for R60W-5,R60-7,R80-7,R190LC-5, R170LC-5,R200-5D,R210-5D,R205-7,R210,R215-7,R220LC-5,R2 | Shaft Type:45.0 LB; Shaft Length:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Port Orientation - Cover End:2520VQ14A12-11CC20; Shaft End Flow @ RPM:2 1/2; Cover End Flow @ RPM:Flange; Integral Valve Configuration:N/A; Spline Description:Standard Pilot; Minor Diameter [Max:0.875 in; Shaft Seal Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77; |
PC120 excavator track chain | Shaft Type:45.0 LB; Mounting Flange:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Pressure Port Size, Cover End:2520VQ14A12-11CC20; Weight:2 1/2; Rotation:Flange; Mounting:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Major Diameter [Max:0.875 in; Shaft End Pressure [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77; |
Kobelco bulldozer/excavator single shank ripper | Minor Diameter [Max:45.0 LB; Cover End RPM [Max:Flange Mount; Mounting Flange:Right Hand (CW); GPM @ 1,800 rpm, Cover End:2520VQ14A12-11CC20; Port Type:2 1/2; Shaft Seal Type:Flange; Seal Material:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Pump Series:0.875 in; Shaft Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77; |
Original PC300 Excavator Side Blade(Part NO.207-70-34160 and 207-70-34170) | Port Type:45.0 LB; Pressure Port Size, Cover End:Flange Mount; Minor Diameter:Right Hand (CW); Model No.:2520VQ14A12-11CC20; Manufacturer Part No.:2 1/2; Cover End Pressure [Max:Flange; Rotation:N/A; Relief Valve Setting:Standard Pilot; Shaft End Pressure [Max:0.875 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77; |
Excavator hydraulic pump nachi, kobelco | Controlled Flow Rate:45.0 LB; Major Diameter [Max:Flange Mount; Model No.:Right Hand (CW); Shaft End Flow @ RPM:2520VQ14A12-11CC20; Pump Series:2 1/2; Relief Valve Setting:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Weight:Standard Pilot; Minor Diameter [Max:0.875 in; Cover End RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77; |
Kobelco excavator hydraulic oil cooler SK230-6E, kobelco hydraulic oil cooler, kobelco oil cooler | Major Diameter [Max:45.0 LB; Integral Valve Configuration:Flange Mount; Shaft Type:Right Hand (CW); Port Orientation - Shaft End:2520VQ14A12-11CC20; Displacement Shaft End (cu in/revolution):2 1/2; Shaft Length:Flange; Minor Diameter [Min:N/A; Shaft Seal Type:Standard Pilot; Cover End RPM [Max:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77; |
Excavator idler roller/track idler/guide wheel for PC120 | Shaft End Flow @ RPM:45.0 LB; Shaft End Pressure [Max:Flange Mount; Port Size:Right Hand (CW); Shaft Length:2520VQ14A12-11CC20; Shaft End RPM [Max:2 1/2; Shaft Key:Flange; Rotation:N/A; Controlled Flow Rate:Standard Pilot; Minor Diameter [Min:0.875 in; Seal Material:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77; |
excavator undercarriage spare parts/track Shoe/track roller/carrier roller for PC100,PC110,PC120,PC150,PC200,PC210,PC230,PC240 | Cover End Pressure [Max:45.0 LB; Pressure Port Size, Cover End:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Shaft Dia.:2520VQ14A12-11CC20; Minor Diameter [Min:2 1/2; Mounting:Flange; Seal Material:N/A; Shaft Type:Standard Pilot; Major Diameter [Max:0.875 in; Mounting Flange:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2700; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2700; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ14A12-11CC20; Cover End Pressure [Max:2300; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:21; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.41; Displacement Shaft End (cu in/revolution):2.77; |
SHANTUI ripper shank.SHANTUI bulldozer TY130 triple frame ripper, shantui bulldozer sd22 single shank ripper Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
SHANTUI ripper shank.SHANTUI bulldozer TY130 triple frame ripper, shantui bulldozer sd22 single shank ripper Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Excavator Undercarriage parts CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump
Customers Who Viewed SHANTUI ripper shank.SHANTUI bulldozer TY130 triple frame ripper, shantui bulldozer sd22 single shank ripper Also Viewed
- excavator parts cab EX200-2 EX180 ZX60 ZX70 ZX75 ZX110
- excavator parts cab on hot sale PC 100, heavy equipment cabs PC220
- PC200-5 excavator cabins, heavy equipment cabs in stock
- forerunner pump, hydraulic pump, leader pump
- cab,kobelco excavator cabin,SK60-3,SK135,SK100-3,SK120-2,SK210,SK140,SK160,SK200-6,SK220-8,SK230,SK250,280,SK330,SK380