Home>Products>Excavator Undercarriage parts>excavator and bulldozer single shank ripper and triple shank ripper
excavator and bulldozer single shank ripper and triple shank ripper MODELS
Need a CAD or 3D Model?
excavator and bulldozer single shank ripper and triple shank ripper
category
Excavator Undercarriage parts
excavator and bulldozer single shank ripper and triple shank ripper SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
excavator and bulldozer single shank ripper and triple shank ripper Technical information
- 1.375 in
- Straight w/ Key
- 3520V
- 3 7/8 in
- Buna-N
- 1800
- N/A
- SAE C, 2 Bolt
- Single Shaft Seal
- N/A
- 1800
- 1800
- N/A
- 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm
- N/A
- N/A
- N/A
- N/A
- N/A
- 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
- 3520V25A14-86DD22R
- 3000
- 2500
- 21
- 37.5
- N/A
- Outlet 135° CW from Inlet
- Outlet 90° CW from Inlet
- 3/4 in Code 61
- 1 1/4 in Code 61
- 2.8
- 4.9
excavator and bulldozer single shank ripper and triple shank ripper Products and services
shantui bulldozer undercarriage parts | Port Size:75.0 LB; Cover End Pressure [Max:Flange Mount; Rotation:Right Hand (CW); Pressure Port Size, Cover End:3520V25A14-86DD22R; Port Orientation - Shaft End:3; Port Orientation - Cover End:Flange; Mounting:5/16 in; Shaft End Flow @ RPM:Standard Pilot; Integral Valve Configuration:1.375 in; Mounting Flange:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A14-86DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.9; |
crawler track link for excavator,track link assembly SD22,SD16,PC60,PC50/PC200/PC300 | Cover End Pressure [Max:75.0 LB; Max. RPM [Max:Flange Mount; Port Size:Right Hand (CW); Seal Material:3520V25A14-86DD22R; Manufacturer Part No.:3; Shaft Dia.:Flange; Spline Description:5/16 in; Rotation:Standard Pilot; Mounting Flange:1.375 in; Port Orientation - Cover End:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A14-86DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.9; |
Excavator hydraulic pump nachi, kobelco | Shaft End RPM [Max:75.0 LB; Relief Valve Setting:Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); Port Orientation - Shaft End:3520V25A14-86DD22R; Seal Material:3; Integral Valve Configuration:Flange; Port Size:5/16 in; Rotation:Standard Pilot; Max. RPM [Max:1.375 in; Minor Diameter [Min:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A14-86DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.9; |
daewoo,kobelco,kubota,kato final drive reduction gearbox reducer casing for excavator | Cover End RPM [Max:75.0 LB; Max. RPM [Max:Flange Mount; Port Type:Right Hand (CW); Shaft End Flow @ RPM:3520V25A14-86DD22R; Displacement Cover End (cu in/revolution):3; Cover End Pressure [Max:Flange; Minor Diameter [Max:5/16 in; Shaft Key:Standard Pilot; Shaft End RPM [Max:1.375 in; Mounting:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A14-86DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.9; |
Volvo Excavator Sprocket for Hitahi/Kobelco | Shaft End Flow @ RPM:75.0 LB; Shaft Type:Flange Mount; Controlled Flow Rate:Right Hand (CW); Minor Diameter [Min:3520V25A14-86DD22R; Max. RPM [Max:3; Shaft Key:Flange; Cover End Pressure [Max:5/16 in; Relief Valve Setting:Standard Pilot; Pressure Port Size, Shaft End:1.375 in; Port Orientation - Shaft End:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A14-86DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.9; |
PC200-6 hydraulic single tine ripper shank for excavator | Port Type:75.0 LB; Port Orientation - Cover End:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Shaft Dia.:3520V25A14-86DD22R; Port Size:3; Shaft End RPM [Max:Flange; Shaft End Pressure [Max:5/16 in; Minor Diameter [Max:Standard Pilot; Pressure Port Size, Shaft End:1.375 in; Cover End Pressure [Max:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A14-86DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.9; |
hydraulic drive wheel motor, small hydraulic motors | Port Type:75.0 LB; Minor Diameter:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Seal Material:3520V25A14-86DD22R; GPM @ 1,800 rpm, Cover End:3; Pump Series:Flange; Minor Diameter [Max:5/16 in; Shaft End RPM [Max:Standard Pilot; Minor Diameter [Min:1.375 in; Spline Description:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A14-86DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.9; |
Excavator and bulldozer undercarriage parts for PC200,PC220,PC300,PC350,PC400 | Seal Material:75.0 LB; Pressure Port Size, Shaft End:Flange Mount; Max. RPM [Max:Right Hand (CW); Cover End Pressure [Max:3520V25A14-86DD22R; Shaft End Pressure [Max:3; Mounting:Flange; Cover End RPM [Max:5/16 in; Minor Diameter [Max:Standard Pilot; Minor Diameter:1.375 in; Manufacturer Part No.:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A14-86DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.9; |
3.8 engine for D50,D60,D65,D80,D85,D155,D355 dozer | Minor Diameter [Min:75.0 LB; Relief Valve Setting:Flange Mount; Shaft Seal Type:Right Hand (CW); Cover End RPM [Max:3520V25A14-86DD22R; Pressure Port Size, Cover End:3; Cover End Pressure [Max:Flange; Seal Material:5/16 in; Port Size:Standard Pilot; Minor Diameter [Max:1.375 in; Max. RPM [Max:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A14-86DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.9; |
dozer operator cab/excavator cabin | Cover End Pressure [Max:75.0 LB; Major Diameter [Min:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Port Size:3520V25A14-86DD22R; Minor Diameter [Max:3; GPM @ 1,800 rpm, Shaft End:Flange; Shaft Dia.:5/16 in; Spline Description:Standard Pilot; Seal Material:1.375 in; Pressure Port Size, Cover End:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A14-86DD22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.9; |
excavator and bulldozer single shank ripper and triple shank ripper Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
excavator and bulldozer single shank ripper and triple shank ripper Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Excavator Undercarriage parts CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump
Customers Who Viewed excavator and bulldozer single shank ripper and triple shank ripper Also Viewed
- excavator parts cab EX200-2 EX180 ZX60 ZX70 ZX75 ZX110
- excavator parts cab on hot sale PC 100, heavy equipment cabs PC220
- PC200-5 excavator cabins, heavy equipment cabs in stock
- forerunner pump, hydraulic pump, leader pump
- cab,kobelco excavator cabin,SK60-3,SK135,SK100-3,SK120-2,SK210,SK140,SK160,SK200-6,SK220-8,SK230,SK250,280,SK330,SK380