• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Excavator Undercarriage parts>Drive/Chain sprocket for crawler excavator and bulldozer

  • Drive/Chain sprocket for crawler excavator and bulldozer
  • Drive/Chain sprocket for crawler excavator and bulldozer

Drive/Chain sprocket for crawler excavator and bulldozer MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Drive/Chain sprocket for crawler excavator and bulldozer

category

Excavator Undercarriage parts

Drive/Chain sprocket for crawler excavator and bulldozer SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Drive/Chain sprocket for crawler excavator and bulldozer Technical information

  • Standard Pilot
  • 1.09 in
  • 13 Tooth Splined
  • Outlet Inline w/Inlet
  • 1 3/4 in
  • Double
  • Buna-N
  • 2.8
  • 0.729 in
  • 4.1
  • Single Shaft Seal
  • 16/32
  • Motor
  • 1800
  • 1800
  • N/A
  • 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm
  • 0.873 in
  • 3/4 in Code 61
  • 0.734 in
  • 0.723 in
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 2520V21A14-11CC22R
  • 4 Bolt Flange Per SAE J518C W/ English Threads
  • 3000
  • 2500
  • 21
  • 31.5
  • 45° CW From Inlet Port
  • N/A
  • Outlet 45° CW from Inlet

Drive/Chain sprocket for crawler excavator and bulldozer Products and services

 

excavator carrier Roller/bottom roller/track roller assemblyControlled Flow Rate:45.0 LB; Cover End RPM [Max:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Port Type:2520V21A14-11CC22R; Shaft End Pressure [Max:2.5; Spline Description:Flange; Cover End Pressure [Max:N/A; Pressure Port Size, Shaft End:22; Major Diameter [Min:Standard Pilot; GPM @ 1,800 rpm, Cover End:1.09 in; Shaft Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
Kawasaki hydraulic pump for excavator,hydraulic pump for wheel loader,nachi hydraulic pumpMounting:45.0 LB; Relief Valve Setting:Flange Mount; Port Type:Right Hand (CW); Port Size:2520V21A14-11CC22R; Displacement Shaft End (cu in/revolution):2.5; Cover End RPM [Max:Flange; Major Diameter [Min:N/A; Weight:22; Displacement Cover End (cu in/revolution):Standard Pilot; Shaft Length:1.09 in; Shaft Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
Idler wheel for/chain idler wheels/ guide wheel excavator PC200 original partsShaft Type:45.0 LB; Shaft Seal Type:Flange Mount; Weight:Right Hand (CW); Minor Diameter:2520V21A14-11CC22R; Shaft End Flow @ RPM:2.5; Relief Valve Setting:Flange; Major Diameter [Max:N/A; Minor Diameter [Min:22; Model No.:Standard Pilot; Minor Diameter [Max:1.09 in; Shaft Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
excavator O-ring,engine spare parts O-ringShaft Key:45.0 LB; Seal Material:Flange Mount; Minor Diameter [Max:Right Hand (CW); Minor Diameter [Min:2520V21A14-11CC22R; Cover End Pressure [Max:2.5; Cover End RPM [Max:Flange; Displacement Cover End (cu in/revolution):N/A; Weight:22; Spline Description:Standard Pilot; GPM @ 1,800 rpm, Cover End:1.09 in; Shaft Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
hydraulic transmission drive, planetary gearbox,transmission gearbox for excavator PC200Cover End Pressure [Max:45.0 LB; Pilot Type:Flange Mount; Manufacturer Part No.:Right Hand (CW); Pressure Port Size, Cover End:2520V21A14-11CC22R; Minor Diameter [Min:2.5; Major Diameter [Min:Flange; Port Type:N/A; Shaft Key:22; Shaft Dia.:Standard Pilot; GPM @ 1,800 rpm, Cover End:1.09 in; Shaft Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
durable r35z-9 excavator digging bucketWeight:45.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Pilot Type:Right Hand (CW); Cover End RPM [Max:2520V21A14-11CC22R; Manufacturer Part No.:2.5; Major Diameter [Min:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Relief Valve Setting:22; Pressure Port Size, Shaft End:Standard Pilot; Shaft Length:1.09 in; Shaft Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
u excavator track roller,bottom roller,carrier roller,PC75,PC78,PC90,PC120,PC200-6,PC140,PC45,PC130,PC30,PC40Displacement Shaft End (cu in/revolution):45.0 LB; Relief Valve Setting:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Port Size:2520V21A14-11CC22R; Manufacturer Part No.:2.5; Pump Series:Flange; Model No.:N/A; Shaft Dia.:22; Max. RPM [Max:Standard Pilot; Integral Valve Configuration:1.09 in; Shaft Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
dozer Cutting edge for dozer ,D60,D80,D85.D135,D155,D355Minor Diameter [Max:45.0 LB; Shaft End RPM [Max:Flange Mount; Major Diameter [Min:Right Hand (CW); Shaft Dia.:2520V21A14-11CC22R; Displacement Shaft End (cu in/revolution):2.5; Pressure Port Size, Shaft End:Flange; Cover End RPM [Max:N/A; Shaft End Flow @ RPM:22; Port Orientation - Shaft End:Standard Pilot; Pump Series:1.09 in; Shaft Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
pc30 mini excavator travel motorSpline Description:45.0 LB; Mounting Flange:Flange Mount; Manufacturer Part No.:Right Hand (CW); Seal Material:2520V21A14-11CC22R; Shaft Length:2.5; Cover End RPM [Max:Flange; Relief Valve Setting:N/A; Mounting:22; GPM @ 1,800 rpm, Cover End:Standard Pilot; Minor Diameter [Max:1.09 in; Shaft Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
excavator cab for PC200-7,PC200-8,excavator cabin pc200-8Cover End RPM [Max:45.0 LB; Major Diameter [Max:Flange Mount; Shaft Length:Right Hand (CW); Port Orientation - Cover End:2520V21A14-11CC22R; Integral Valve Configuration:2.5; Model No.:Flange; GPM @ 1,800 rpm, Cover End:N/A; Rotation:22; Pressure Port Size, Cover End:Standard Pilot; Major Diameter [Min:1.09 in; Shaft Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.729 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CC22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;

 

 

Drive/Chain sprocket for crawler excavator and bulldozer Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Drive/Chain sprocket for crawler excavator and bulldozer Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Excavator Undercarriage parts CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Drive/Chain sprocket for crawler excavator and bulldozer Also Viewed

  • excavator parts cab EX200-2 EX180 ZX60 ZX70 ZX75 ZX110
  • excavator parts cab on hot sale PC 100, heavy equipment cabs PC220
  • PC200-5 excavator cabins, heavy equipment cabs in stock
  • forerunner pump, hydraulic pump, leader pump
  • cab,kobelco excavator cabin,SK60-3,SK135,SK100-3,SK120-2,SK210,SK140,SK160,SK200-6,SK220-8,SK230,SK250,280,SK330,SK380
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us