• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Excavator Undercarriage parts>excavator /volvo/kobelco recoil spring and track adjuster

  • excavator /volvo/kobelco recoil spring and track adjuster
  • excavator /volvo/kobelco recoil spring and track adjuster

excavator /volvo/kobelco recoil spring and track adjuster MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

excavator /volvo/kobelco recoil spring and track adjuster

category

Excavator Undercarriage parts

excavator /volvo/kobelco recoil spring and track adjuster SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

excavator /volvo/kobelco recoil spring and track adjuster Technical information

  • Standard Pilot
  • 0.875 in
  • 3/4 in Code 61
  • 2520V
  • 2.32 in
  • Double
  • Buna-N
  • 1800
  • N/A
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • N/A
  • Motor
  • 1800
  • 1800
  • N/A
  • 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • 2.5
  • 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
  • 2520V12A12-1AA22R
  • 4 Bolt Flange Per SAE J518C W/ English Threads
  • 1 in Code 61
  • 2500
  • 18
  • 18
  • 135° CCW From Inlet Port
  • N/A
  • Outlet 135° CCW from Inlet

excavator /volvo/kobelco recoil spring and track adjuster Products and services

 

PC300/PC200/PC210/PC120 undercarriage parts track link/track shoeModel No.:45.0 LB; Pump Series:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Port Size:2520V12A12-1AA22R; GPM @ 1,800 rpm, Shaft End:2.5; Pressure Port Size, Shaft End:Flange; Shaft End Flow @ RPM:1/4 in; Port Type:22; Shaft Type:Standard Pilot; Max. RPM [Max:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):2.5;
Excavator Cab for EX200-2,excavator cab,cab for EX25,EX30UR-2,EX35,EX40,EX45UU,EX50,EX60,EX75,EX90,EX100,EX55,EX120Port Orientation - Shaft End:45.0 LB; Cover End Pressure [Max:Flange Mount; Minor Diameter:Right Hand (CW); Displacement Shaft End (cu in/revolution):2520V12A12-1AA22R; Major Diameter [Max:2.5; Major Diameter [Min:Flange; Pump Series:1/4 in; Shaft End Flow @ RPM:22; Shaft End RPM [Max:Standard Pilot; Shaft Key:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):2.5;
Excavator hydraulic pump nachi, kobelcoShaft End Flow @ RPM:45.0 LB; Shaft Type:Flange Mount; Pump Series:Right Hand (CW); Manufacturer Part No.:2520V12A12-1AA22R; Pressure Port Size, Cover End:2.5; GPM @ 1,800 rpm, Shaft End:Flange; Minor Diameter:1/4 in; Shaft Dia.:22; Cover End RPM [Max:Standard Pilot; Mounting:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):2.5;
excavator track link assembly,track link:PC30,PC35,PC40,PC45,PC50,PC55,PC60,PC75,PC120,PC130,PC140,PC150Shaft Seal Type:45.0 LB; Port Orientation - Shaft End:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Shaft Length:2520V12A12-1AA22R; Port Size:2.5; Model No.:Flange; Displacement Shaft End (cu in/revolution):1/4 in; Major Diameter [Max:22; Port Orientation - Cover End:Standard Pilot; Max. RPM [Max:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):2.5;
Excavator Cab for ZAXIS 200-3Mounting Flange:45.0 LB; Minor Diameter [Max:Flange Mount; Model No.:Right Hand (CW); Mounting:2520V12A12-1AA22R; Shaft Type:2.5; Shaft Key:Flange; Pilot Type:1/4 in; Pump Series:22; Port Orientation - Shaft End:Standard Pilot; Shaft End Pressure [Max:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):2.5;
Carrier Roller/top roller for Excavator PC 200Shaft End Pressure [Max:45.0 LB; Port Orientation - Shaft End:Flange Mount; Pilot Type:Right Hand (CW); Weight:2520V12A12-1AA22R; Major Diameter [Max:2.5; Shaft Dia.:Flange; Relief Valve Setting:1/4 in; GPM @ 1,800 rpm, Shaft End:22; Port Size:Standard Pilot; Major Diameter [Min:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):2.5;
Volvo EC55B hydraulic pump cylinder block and hydraulic pump partsDisplacement Cover End (cu in/revolution):45.0 LB; Shaft Seal Type:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Pressure Port Size, Cover End:2520V12A12-1AA22R; Pilot Type:2.5; Port Orientation - Shaft End:Flange; Seal Material:1/4 in; Shaft Type:22; Model No.:Standard Pilot; GPM @ 1,800 rpm, Shaft End:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):2.5;
pc30 excavator track rollers , undercarriage partsManufacturer Part No.:45.0 LB; Mounting:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Pressure Port Size, Shaft End:2520V12A12-1AA22R; Shaft Length:2.5; Displacement Shaft End (cu in/revolution):Flange; Controlled Flow Rate:1/4 in; Shaft End RPM [Max:22; Cover End RPM [Max:Standard Pilot; Cover End Pressure [Max:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):2.5;
D85 bulldozer ripperMajor Diameter [Max:45.0 LB; Port Orientation - Shaft End:Flange Mount; Shaft Type:Right Hand (CW); Minor Diameter [Min:2520V12A12-1AA22R; Major Diameter [Min:2.5; Max. RPM [Max:Flange; Shaft Seal Type:1/4 in; Pump Series:22; Shaft End RPM [Max:Standard Pilot; Displacement Cover End (cu in/revolution):0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):2.5;
u excavator track roller,bottom roller,carrier roller,PC75,PC78,PC90,PC120,PC200-6,PC140,PC45,PC130,PC30,PC40Shaft Key:45.0 LB; Shaft Seal Type:Flange Mount; Minor Diameter [Min:Right Hand (CW); Shaft End Pressure [Max:2520V12A12-1AA22R; Cover End Flow @ RPM:2.5; Cover End RPM [Max:Flange; Port Type:1/4 in; Controlled Flow Rate:22; Seal Material:Standard Pilot; Major Diameter [Min:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:2520V12A12-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:18; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):2.5;

 

 

excavator /volvo/kobelco recoil spring and track adjuster Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

excavator /volvo/kobelco recoil spring and track adjuster Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Excavator Undercarriage parts CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed excavator /volvo/kobelco recoil spring and track adjuster Also Viewed

  • excavator parts cab EX200-2 EX180 ZX60 ZX70 ZX75 ZX110
  • excavator parts cab on hot sale PC 100, heavy equipment cabs PC220
  • PC200-5 excavator cabins, heavy equipment cabs in stock
  • forerunner pump, hydraulic pump, leader pump
  • cab,kobelco excavator cabin,SK60-3,SK135,SK100-3,SK120-2,SK210,SK140,SK160,SK200-6,SK220-8,SK230,SK250,280,SK330,SK380
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us