• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Hitachi hydraulic pump>Eaton JMV185 Final Drive R360lc-7 R360LC-9 R380LC-9SH Travel Motor Travel Device Walking Motor

  • Eaton JMV185 Final Drive R360lc-7 R360LC-9 R380LC-9SH Travel Motor Travel Device Walking Motor
  • Eaton JMV185 Final Drive R360lc-7 R360LC-9 R380LC-9SH Travel Motor Travel Device Walking Motor

Eaton JMV185 Final Drive R360lc-7 R360LC-9 R380LC-9SH Travel Motor Travel Device Walking Motor MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Eaton JMV185 Final Drive R360lc-7 R360LC-9 R380LC-9SH Travel Motor Travel Device Walking Motor

category

Hitachi hydraulic pump

Eaton JMV185 Final Drive R360lc-7 R360LC-9 R380LC-9SH Travel Motor Travel Device Walking Motor SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Eaton JMV185 Final Drive R360lc-7 R360LC-9 R380LC-9SH Travel Motor Travel Device Walking Motor Technical information

  • 1.25 in
  • 14 Tooth Splined
  • 3520VQ
  • 1.9375 in
  • Double
  • Buna-N
  • 2500
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2500
  • 2500
  • N/A
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm
  • 3520VQ30E11-11AA20
  • 3000
  • 3000
  • 16.5
  • 45
  • w/o Integral Valves
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 1 1/16 in SAE O-Ring
  • 1 1/4 in Flange
  • 2.2

Eaton JMV185 Final Drive R360lc-7 R360LC-9 R380LC-9SH Travel Motor Travel Device Walking Motor Products and services

 

hydraulic PC70 swing motor for mini excavatorPressure Port Size, Cover End:75.0 LB; Shaft Key:Flange Mount; Model No.:Right Hand (CW); Port Orientation - Shaft End:3520VQ30E11-11AA20; Pump Series:3; Weight:Flange; Shaft Dia.:N/A; Minor Diameter:Standard Pilot; Shaft Type:1.25 in; Shaft End Pressure [Max:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6;
pc30mr-1 hydraulic pump, 708-1S-00150,excavator mini excavator hydraulic pumpShaft Type:75.0 LB; Shaft End RPM [Max:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Shaft Length:3520VQ30E11-11AA20; Relief Valve Setting:3; Model No.:Flange; Port Size:N/A; Cover End RPM [Max:Standard Pilot; Integral Valve Configuration:1.25 in; Spline Description:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6;
Excavator SK200-8 swing reducer for SK200-8 swing gearbox YN32W00019F1,final drive assy for sk250-8Shaft Type:75.0 LB; Integral Valve Configuration:Flange Mount; Mounting:Right Hand (CW); Spline Description:3520VQ30E11-11AA20; Port Orientation - Cover End:3; Model No.:Flange; Cover End Pressure [Max:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Shaft Length:1.25 in; Minor Diameter:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6;
PC55 coupler for excavator,best price excavator bucket quick coupler for PC55Cover End RPM [Max:75.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Port Type:Right Hand (CW); Shaft End Pressure [Max:3520VQ30E11-11AA20; Minor Diameter [Min:3; Shaft End Flow @ RPM:Flange; Mounting:N/A; Port Size:Standard Pilot; Relief Valve Setting:1.25 in; Cover End Flow @ RPM:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6;
Excavator Hyundai main pump for R290LC-7 R320LC-7 R320LC-7A kawasaki K3V180DT hydraulic pumpShaft Type:75.0 LB; Mounting Flange:Flange Mount; Shaft Seal Type:Right Hand (CW); Seal Material:3520VQ30E11-11AA20; Major Diameter [Max:3; Minor Diameter [Min:Flange; Max. RPM [Max:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Shaft End RPM [Max:1.25 in; Cover End Flow @ RPM:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6;
Original PC50 Excavator hydraulic pump,708-3S-00522,PC40MR-2 ,PC50MR-2Shaft Dia.:75.0 LB; Pressure Port Size, Cover End:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Weight:3520VQ30E11-11AA20; Shaft Length:3; Cover End RPM [Max:Flange; Cover End Flow @ RPM:N/A; Shaft End Flow @ RPM:Standard Pilot; Model No.:1.25 in; Shaft Type:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6;
Wholesale 21P-26-K1270 PC150LC-6K excavator swing carrier assy , planetary carrier assy from ChinaSpline Description:75.0 LB; Model No.:Flange Mount; Relief Valve Setting:Right Hand (CW); Shaft Key:3520VQ30E11-11AA20; Integral Valve Configuration:3; Weight:Flange; Shaft Seal Type:N/A; Minor Diameter [Min:Standard Pilot; Pressure Port Size, Shaft End:1.25 in; Port Type:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6;
Excavator Original New PC400-6 pc210-7 Final Drive,pc200-7 pc210-8 Travel Reduction Gear,Travel Device for pc400Model No.:75.0 LB; Shaft Dia.:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Cover End RPM [Max:3520VQ30E11-11AA20; Pressure Port Size, Shaft End:3; Minor Diameter [Min:Flange; Manufacturer Part No.:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Shaft Length:1.25 in; Rotation:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6;
KYB MAG-170VP final drive travel motor, MAG-18VP-350,final drive and travel motor assy for Sumitomo SH200A2 SH200-2Port Size:75.0 LB; Cover End Flow @ RPM:Flange Mount; Seal Material:Right Hand (CW); Minor Diameter:3520VQ30E11-11AA20; Spline Description:3; Port Type:Flange; GPM @ 1,800 rpm, Cover End:N/A; Mounting:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Weight:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6;
Excavator PC200-7 PC210-7 20Y-03-31111 Radiator Core ASS'Y,Oil Cooler AssyShaft End Flow @ RPM:75.0 LB; Port Orientation - Cover End:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Shaft Type:3520VQ30E11-11AA20; Port Size:3; Model No.:Flange; Shaft Seal Type:N/A; Major Diameter [Max:Standard Pilot; Shaft End RPM [Max:1.25 in; Minor Diameter:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1.9375 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ30E11-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/16 in SAE O-Ring; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):6;

 

 

Eaton JMV185 Final Drive R360lc-7 R360LC-9 R380LC-9SH Travel Motor Travel Device Walking Motor Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Eaton JMV185 Final Drive R360lc-7 R360LC-9 R380LC-9SH Travel Motor Travel Device Walking Motor Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Hitachi hydraulic pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Eaton JMV185 Final Drive R360lc-7 R360LC-9 R380LC-9SH Travel Motor Travel Device Walking Motor Also Viewed

  • 3264635 engine parts 320D fuel pump for 320D
  • Hyundai parts R250LC-7 Final Drive Travel Motor Drive Motor XKAH-00901
  • MAG-33VP-550 final drive KAYABA travel motor MAG-33VP-550
  • Hitachi ZX350 fuel pump, 294050-0103 Denso fuel injection pump
  • Hyundai R60 excavator travel motor assy GM07 final drive
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us