Home>Products>Hitachi hydraulic pump>325C final drive excavator 325C travel motor assy 325C excavator final transmission
325C final drive excavator 325C travel motor assy 325C excavator final transmission MODELS
Need a CAD or 3D Model?
325C final drive excavator 325C travel motor assy 325C excavator final transmission
category
Hitachi hydraulic pump
325C final drive excavator 325C travel motor assy 325C excavator final transmission SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
325C final drive excavator 325C travel motor assy 325C excavator final transmission Technical information
- 0.875 in
- 13 Tooth Splined
- V2010
- 1 5/16 in
- Buna-N
- 2400
- 0.728 in
- SAE B, 2 Bolt
- Single Shaft Seal
- 16/32
- 2800
- 2400
- N/A
- 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm
- 0.873 in
- 0.872 in
- 0.7335 in
- 0.7225 in
- N/A
- 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm
- V2010-1F13S7S-11CC12LH
- 2000
- 2200
- 10.5
- 19.5
- N/A
- Outlet 45° CW from Inlet
- Outlet Inline w/Inlet
- 1/2 in SAE O-Ring
- 3/4 in SAE O-Ring
- 1.39
- 2.59
325C final drive excavator 325C travel motor assy 325C excavator final transmission Products and services
XCMG Final Drive XE80 Excavator Final Drive XE80E Excavator Travel Motor Walking Motor | Port Orientation - Shaft End:30.0 LB; Cover End RPM [Max:Flange Mount; Controlled Flow Rate:Left Hand (CCW); Displacement Cover End (cu in/revolution):V2010-1F13S7S-11CC12LH; GPM @ 1,800 rpm, Cover End:1 1/2; Shaft Dia.:Flange; Integral Valve Configuration:N/A; Shaft Key:N/A; Shaft End Flow @ RPM:0.875 in; Pilot Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11CC12LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
Excavator Doosan S340lc-5 travel motor, EC360B final drive,walking motor for EC360B,EC240B | Pressure Port Size, Cover End:30.0 LB; Shaft Type:Flange Mount; Rotation:Left Hand (CCW); Mounting Flange:V2010-1F13S7S-11CC12LH; Shaft Seal Type:1 1/2; Pump Series:Flange; Shaft End Flow @ RPM:N/A; Manufacturer Part No.:N/A; Shaft End Pressure [Max:0.875 in; Shaft Dia.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11CC12LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
SK30 travel motor,final drive,for Kobelco SK50UR,SK30,SK45,SK80,SK60,SK75UR,SK90,SK230,SK210,SK220,SK380,SK330,SK450 | Shaft Dia.:30.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Shaft Length:Left Hand (CCW); Pressure Port Size, Cover End:V2010-1F13S7S-11CC12LH; Shaft Seal Type:1 1/2; Shaft End RPM [Max:Flange; Spline Description:N/A; Mounting Flange:N/A; Port Orientation - Shaft End:0.875 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11CC12LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
Engine Exhaust Silencer PC350-8 Exhaust Muffler | Major Diameter [Min:30.0 LB; Cover End Pressure [Max:Flange Mount; Weight:Left Hand (CCW); Pilot Type:V2010-1F13S7S-11CC12LH; Minor Diameter:1 1/2; Minor Diameter [Max:Flange; Shaft Type:N/A; Shaft Length:N/A; Integral Valve Configuration:0.875 in; Shaft End Flow @ RPM:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11CC12LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
NEW or good used PC200-8 monitor,7835311012,7835311013 replacement | Cover End RPM [Max:30.0 LB; Rotation:Flange Mount; Controlled Flow Rate:Left Hand (CCW); Minor Diameter [Min:V2010-1F13S7S-11CC12LH; GPM @ 1,800 rpm, Shaft End:1 1/2; Model No.:Flange; Major Diameter [Max:N/A; Weight:N/A; Relief Valve Setting:0.875 in; Mounting:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11CC12LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
PC120 final drive ,GM18,GM21,final drive with gearbox pc120,pc200-8 | Major Diameter [Min:30.0 LB; Cover End Pressure [Max:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Rotation:V2010-1F13S7S-11CC12LH; Port Orientation - Shaft End:1 1/2; Weight:Flange; Mounting Flange:N/A; Shaft End Pressure [Max:N/A; Max. RPM [Max:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11CC12LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
Excavator PC160LC-7 oil cooler for PC200-8 pc220 excavator radiator | Shaft Type:30.0 LB; Max. RPM [Max:Flange Mount; Mounting Flange:Left Hand (CCW); Shaft End Flow @ RPM:V2010-1F13S7S-11CC12LH; GPM @ 1,800 rpm, Cover End:1 1/2; Shaft Key:Flange; Port Size:N/A; Pump Series:N/A; Major Diameter [Max:0.875 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11CC12LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
Daewoo Excavator Hydraulic Main Pump Solar 130LC-5 Hydraulic Pump Main PUMP | Cover End Flow @ RPM:30.0 LB; Rotation:Flange Mount; Shaft End Flow @ RPM:Left Hand (CCW); Model No.:V2010-1F13S7S-11CC12LH; GPM @ 1,800 rpm, Shaft End:1 1/2; Weight:Flange; Displacement Shaft End (cu in/revolution):N/A; Pilot Type:N/A; Pressure Port Size, Cover End:0.875 in; Seal Material:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11CC12LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
Excavator Daewoo Solar 300LC Final Drive Assy SL300LC Travel Motor and Travel Reduction | Port Type:30.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Minor Diameter [Max:Left Hand (CCW); Displacement Cover End (cu in/revolution):V2010-1F13S7S-11CC12LH; Mounting Flange:1 1/2; Spline Description:Flange; Cover End Flow @ RPM:N/A; GPM @ 1,800 rpm, Cover End:N/A; Port Orientation - Shaft End:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11CC12LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
China supplier PC60 track adjuster cylinder,201-30-62310,mini excavator spring cylinders for PC60,PC60-5,PC60-7 | Shaft Type:30.0 LB; Port Orientation - Cover End:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Port Orientation - Shaft End:V2010-1F13S7S-11CC12LH; Port Size:1 1/2; Shaft Length:Flange; Displacement Cover End (cu in/revolution):N/A; Pressure Port Size, Cover End:N/A; Weight:0.875 in; Relief Valve Setting:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2800; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S7S-11CC12LH; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.59; |
325C final drive excavator 325C travel motor assy 325C excavator final transmission Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
325C final drive excavator 325C travel motor assy 325C excavator final transmission Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Hitachi hydraulic pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump