Home>Products>Hitachi hydraulic pump>GM18 final drive,GM series travel motor and final drive ,for PC120
GM18 final drive,GM series travel motor and final drive ,for PC120 MODELS
Need a CAD or 3D Model?
GM18 final drive,GM series travel motor and final drive ,for PC120
category
Hitachi hydraulic pump
GM18 final drive,GM series travel motor and final drive ,for PC120 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
GM18 final drive,GM series travel motor and final drive ,for PC120 Technical information
- 0.73 in
- 11 Tooth Splined
- 7.5 gpm @ 1800 rpm
- V10
- 1 1/4 in
- 1/2 in NPT
- Buna-N
- 3200
- 2500 psi
- 7 1/2
- P
- SAE A, 2 Bolt
- P
- 1
- 90° CCW from Inlet
- 1
- w/o Integral Valves
- 38B
GM18 final drive,GM series travel motor and final drive ,for PC120 Products and services
Excavator Kobelco sk200-8 sk250-8 swing reduction,sk200 swing device assy for Kobelco Hyundai Volvo Doosan | Shaft Key:15.0 LB; Pump Series:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Manufacturer Part No.:1; Mounting Flange:NPT; Model No.:N/A; GPM @ 1,800 rpm, Cover End:20; Major Diameter [Max:5 gpm @ 1200 rpm; Displacement Shaft End (cu in/revolution):0.73 in; Port Orientation - Cover End:11 Tooth Splined; GPM @ Speed:7.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:1/2 in NPT; Seal Material:Buna-N; Max. RPM [Max:3200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:7 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
PC35MR-3 Excavator Swing Motor with Gearbox, PC35MR-3 Swing Motor Swing Reduction | Controlled Flow Rate:15.0 LB; Pressure Port Size, Shaft End:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Port Size:1; Pilot Type:NPT; Mounting Flange:N/A; Manufacturer Part No.:20; Shaft Seal Type:5 gpm @ 1200 rpm; Port Orientation - Cover End:0.73 in; Shaft Length:11 Tooth Splined; GPM @ Speed:7.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:1/2 in NPT; Seal Material:Buna-N; Max. RPM [Max:3200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:7 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
D375A-5 bulldozer hydraulic pump,gear pump 705-58-44050 for bulldozer machine D375A-3/5 | Pressure Port Size, Cover End:15.0 LB; Port Type:Flange Mount; Minor Diameter [Max:Right Hand (CW); Max. RPM [Max:1; Weight:NPT; Integral Valve Configuration:N/A; Shaft End RPM [Max:20; Shaft Type:5 gpm @ 1200 rpm; Port Orientation - Shaft End:0.73 in; Pilot Type:11 Tooth Splined; GPM @ Speed:7.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:1/2 in NPT; Seal Material:Buna-N; Max. RPM [Max:3200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:7 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
307B travel gearbox excavator 307B final drive without motor | Shaft Seal Type:15.0 LB; Model No.:Flange Mount; Pilot Type:Right Hand (CW); Shaft End RPM [Max:1; Port Size:NPT; Shaft End Flow @ RPM:N/A; Controlled Flow Rate:20; Major Diameter [Min:5 gpm @ 1200 rpm; Displacement Shaft End (cu in/revolution):0.73 in; Major Diameter [Max:11 Tooth Splined; GPM @ Speed:7.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:1/2 in NPT; Seal Material:Buna-N; Max. RPM [Max:3200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:7 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
pc138US main pump, 7081L00551,hydraulic main pump pc138US-2EL,pc138US-8 Original New | Shaft Dia.:15.0 LB; Major Diameter [Min:Flange Mount; Port Size:Right Hand (CW); Shaft Seal Type:1; Cover End Flow @ RPM:NPT; Minor Diameter:N/A; Integral Valve Configuration:20; Max. RPM [Max:5 gpm @ 1200 rpm; GPM @ 1,800 rpm, Shaft End:0.73 in; Shaft Type:11 Tooth Splined; GPM @ Speed:7.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:1/2 in NPT; Seal Material:Buna-N; Max. RPM [Max:3200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:7 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
1142472 excavator 312 fuel injection pump,genuine parts | Cover End Flow @ RPM:15.0 LB; Pressure Port Size, Cover End:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Cover End Pressure [Max:1; Seal Material:NPT; Cover End RPM [Max:N/A; Port Orientation - Cover End:20; Shaft End Pressure [Max:5 gpm @ 1200 rpm; Minor Diameter:0.73 in; Max. RPM [Max:11 Tooth Splined; GPM @ Speed:7.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:1/2 in NPT; Seal Material:Buna-N; Max. RPM [Max:3200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:7 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
Doosan DX140 excavator rock bucket, DH35/DH55/DH60/DX60/DH70/DX140 rock bucket | Cover End Flow @ RPM:15.0 LB; Controlled Flow Rate:Flange Mount; Model No.:Right Hand (CW); Manufacturer Part No.:1; Max. RPM [Max:NPT; Port Orientation - Shaft End:N/A; Pilot Type:20; Major Diameter [Min:5 gpm @ 1200 rpm; Shaft Length:0.73 in; Pressure Port Size, Shaft End:11 Tooth Splined; GPM @ Speed:7.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:1/2 in NPT; Seal Material:Buna-N; Max. RPM [Max:3200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:7 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
Excavator PC400-6 Final drive,pc450-7 Final drive for excavator pc400-7 pc400-8 pc450-6 travel motor | Model No.:15.0 LB; Pump Series:Flange Mount; Minor Diameter:Right Hand (CW); Port Type:1; Seal Material:NPT; Relief Valve Setting:N/A; Pilot Type:20; Displacement Shaft End (cu in/revolution):5 gpm @ 1200 rpm; GPM @ 1,800 rpm, Shaft End:0.73 in; Cover End Pressure [Max:11 Tooth Splined; GPM @ Speed:7.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:1/2 in NPT; Seal Material:Buna-N; Max. RPM [Max:3200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:7 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
VolVo EC290NLC hydraulic cylinder, SA114604340 ,EC290 mini excavator hydraulic cylinder | Integral Valve Configuration:15.0 LB; Major Diameter [Max:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Displacement Cover End (cu in/revolution):1; Cover End Pressure [Max:NPT; Cover End Flow @ RPM:N/A; Shaft End RPM [Max:20; Minor Diameter [Min:5 gpm @ 1200 rpm; Pilot Type:0.73 in; Cover End RPM [Max:11 Tooth Splined; GPM @ Speed:7.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:1/2 in NPT; Seal Material:Buna-N; Max. RPM [Max:3200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:7 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
Volvo EC460 excavator swing Rotary motor,VOE 14550092,M5X130CBH-10A,AQ2341 FOR EC460B,EC460C,EC460BLC | Port Size:15.0 LB; Controlled Flow Rate:Flange Mount; Relief Valve Setting:Right Hand (CW); Shaft Seal Type:1; Displacement Cover End (cu in/revolution):NPT; Shaft Dia.:N/A; Major Diameter [Max:20; GPM @ 1,800 rpm, Cover End:5 gpm @ 1200 rpm; Rotation:0.73 in; Mounting:11 Tooth Splined; GPM @ Speed:7.5 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 1/4 in; Pressure Port:1/2 in NPT; Seal Material:Buna-N; Max. RPM [Max:3200; Pressure [Max:2500 psi; GPM @ 1,800 rpm:7 1/2; Inlet Port Code:P; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:P; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):1; Integral Valve Configuration:w/o Integral Valves; Shaft Code + Outlet Port Code:38B; |
GM18 final drive,GM series travel motor and final drive ,for PC120 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
GM18 final drive,GM series travel motor and final drive ,for PC120 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Hitachi hydraulic pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump