Home>Products>excavator pump>Automatic Resuscitator with 200 L cylinder capacity
Automatic Resuscitator with 200 L cylinder capacity MODELS
Need a CAD or 3D Model?
Automatic Resuscitator with 200 L cylinder capacity
category
excavator pump
Automatic Resuscitator with 200 L cylinder capacity SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Automatic Resuscitator with 200 L cylinder capacity Systems
- 0.875 in
- 13 Tooth Splined
- V2010
- 1.3125 in
- Buna-N
- 3000
- 0.728 in
- SAE B, 2 Bolt
- Single Shaft Seal
- 16/32
- 3000
- 3000
- N/A
- 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm
- 0.873 in
- 0.872 in
- 0.7335 in
- 0.7225 in
- N/A
- 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm
- V2010-1F7S6S-11DD12
- 2200
- 2500
- 9
- 10.5
- N/A
- Outlet 135° CW from Inlet
- Outlet 90° CW from Inlet
- 1/2 in SAE O-Ring
- 3/4 in SAE O-Ring
- 1.19
- 1.39
Automatic Resuscitator with 200 L cylinder capacity Dimensions
Hard rock breaker Hydraulic splitting machine for rock/stone splitting in construction | Major Diameter [Min:30.0 LB; Model No.:Flange Mount; Shaft Dia.:Right Hand (CW); Weight:V2010-1F7S6S-11DD12; Shaft Length:1 1/2; Pressure Port Size, Shaft End:Flange; Displacement Cover End (cu in/revolution):N/A; Pressure Port Size, Cover End:N/A; Rotation:0.875 in; Mounting Flange:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S6S-11DD12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
better efficiency Indoor cement floor clean grinding machine | Pilot Type:30.0 LB; Cover End Flow @ RPM:Flange Mount; Manufacturer Part No.:Right Hand (CW); Shaft Type:V2010-1F7S6S-11DD12; Shaft Length:1 1/2; Shaft Key:Flange; Controlled Flow Rate:N/A; Shaft End Flow @ RPM:N/A; Minor Diameter [Max:0.875 in; Pump Series:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S6S-11DD12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
Highway Guardrail Hydraulic Pile Driver For Posts Installation at Competitive Price | Major Diameter [Max:30.0 LB; Port Type:Flange Mount; Major Diameter [Min:Right Hand (CW); Port Orientation - Shaft End:V2010-1F7S6S-11DD12; Shaft Dia.:1 1/2; Shaft Type:Flange; Max. RPM [Max:N/A; Controlled Flow Rate:N/A; Port Size:0.875 in; Mounting:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S6S-11DD12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
CTE-25AS high pressure electric hydraulic pump station | Port Size:30.0 LB; Pressure Port Size, Cover End:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Mounting:V2010-1F7S6S-11DD12; Seal Material:1 1/2; Major Diameter [Min:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Cover End Pressure [Max:N/A; Model No.:0.875 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S6S-11DD12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
100KW micro hydro turgo turbine power generator | Displacement Cover End (cu in/revolution):30.0 LB; Port Size:Flange Mount; Minor Diameter:Right Hand (CW); Pressure Port Size, Shaft End:V2010-1F7S6S-11DD12; Cover End Flow @ RPM:1 1/2; Cover End RPM [Max:Flange; Mounting Flange:N/A; Shaft Key:N/A; Max. RPM [Max:0.875 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S6S-11DD12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
SYJ-1400 Tack rail electric quarry sandstone block sawing cutting machine | Cover End Pressure [Max:30.0 LB; Shaft End Pressure [Max:Flange Mount; Shaft Length:Right Hand (CW); Cover End Flow @ RPM:V2010-1F7S6S-11DD12; Port Orientation - Shaft End:1 1/2; Mounting Flange:Flange; Pressure Port Size, Shaft End:N/A; Displacement Shaft End (cu in/revolution):N/A; Port Type:0.875 in; Shaft End Flow @ RPM:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S6S-11DD12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
KHYD75 series high efficient rock electric coal drill mini machine for sale | Model No.:30.0 LB; Port Type:Flange Mount; Port Orientation - Shaft End:Right Hand (CW); Controlled Flow Rate:V2010-1F7S6S-11DD12; Manufacturer Part No.:1 1/2; Displacement Cover End (cu in/revolution):Flange; Shaft Key:N/A; Pump Series:N/A; Max. RPM [Max:0.875 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S6S-11DD12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
11kw Frame column hydraulic drilling machine | Major Diameter [Max:30.0 LB; Pump Series:Flange Mount; Shaft Key:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:V2010-1F7S6S-11DD12; Pressure Port Size, Cover End:1 1/2; Shaft Length:Flange; Integral Valve Configuration:N/A; Shaft Dia.:N/A; Major Diameter [Min:0.875 in; Weight:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S6S-11DD12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
300w Mini portable water power turbine generator/hydroelectric generator | Weight:30.0 LB; Port Type:Flange Mount; Cover End RPM [Max:Right Hand (CW); Mounting Flange:V2010-1F7S6S-11DD12; Controlled Flow Rate:1 1/2; Port Orientation - Cover End:Flange; Minor Diameter:N/A; Shaft End Flow @ RPM:N/A; Major Diameter [Max:0.875 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1.3125 in; Seal Material:Buna-N; Max. RPM [Max:3000; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:3000; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F7S6S-11DD12; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:10.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):1.39; |
Automatic Resuscitator with 200 L cylinder capacity Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Automatic Resuscitator with 200 L cylinder capacity Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
excavator pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump
Customers Who Viewed Automatic Resuscitator with 200 L cylinder capacity Also Viewed
- LP600F-L automatic airport luggage wrapping machine ( optional:electronic scale and TV screen )
- High Quality Uv Printer Flatbed 3d Glass Printer Price
- Backpack Portable Core Drill core drilling
- LP600F-L automatic Airport baggage wrapping Machine,luggage wrapper
- High Quality Rail Cutting swing Machine