• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Kawasaki pump>EX75UR FINAL DRIVE/TRAVEL DEVICE P/N:9133897,EX50 DRIVE MOTOR,ZX55 TRAVEL MOTOR

  • EX75UR FINAL DRIVE/TRAVEL DEVICE P/N:9133897,EX50 DRIVE MOTOR,ZX55 TRAVEL MOTOR
  • EX75UR FINAL DRIVE/TRAVEL DEVICE P/N:9133897,EX50 DRIVE MOTOR,ZX55 TRAVEL MOTOR

EX75UR FINAL DRIVE/TRAVEL DEVICE P/N:9133897,EX50 DRIVE MOTOR,ZX55 TRAVEL MOTOR MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

EX75UR FINAL DRIVE/TRAVEL DEVICE P/N:9133897,EX50 DRIVE MOTOR,ZX55 TRAVEL MOTOR

category

Kawasaki pump

EX75UR FINAL DRIVE/TRAVEL DEVICE P/N:9133897,EX50 DRIVE MOTOR,ZX55 TRAVEL MOTOR SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

EX75UR FINAL DRIVE/TRAVEL DEVICE P/N:9133897,EX50 DRIVE MOTOR,ZX55 TRAVEL MOTOR Technical information

  • Standard Pilot
  • 0.875 in
  • 1 in Code 61
  • 2520V
  • 2.32 in
  • Double
  • Buna-N
  • 1800
  • N/A
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 2.8
  • Motor
  • 1800
  • 1800
  • N/A
  • 3.4
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
  • 2520V17A14-1AA22R
  • 4 Bolt Flange Per SAE J518C W/ English Threads
  • 3/4 in Code 61
  • 2500
  • 21
  • 25.5
  • 135° CCW From Inlet Port
  • N/A
  • Outlet 135° CCW from Inlet

EX75UR FINAL DRIVE/TRAVEL DEVICE P/N:9133897,EX50 DRIVE MOTOR,ZX55 TRAVEL MOTOR Products and services

 

PC40 final drive,PC25 excavator travel motor,PC70,PC60,PC30,PC45,PC50UU-2,PC60,PC40-2,PC88MR,PC80,PC50,PC35MR-2,Minor Diameter [Max:45.0 LB; Manufacturer Part No.:Flange Mount; Shaft Length:Right Hand (CW); Port Orientation - Cover End:2520V17A14-1AA22R; Port Orientation - Shaft End:2.5; Weight:Flange; Port Size:1/4 in; Displacement Cover End (cu in/revolution):22; Major Diameter [Min:Standard Pilot; Displacement Shaft End (cu in/revolution):0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A14-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):3.4;
Kobelco SK300 final drive,travel motor,SK70,SK290 excavator,SK100,SK80,SK120LC,SK330LC,SK55,SK220,SK280,SK90,SK230,SK250,SK260,Major Diameter [Max:45.0 LB; Cover End RPM [Max:Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); Minor Diameter:2520V17A14-1AA22R; Shaft Type:2.5; Relief Valve Setting:Flange; GPM @ 1,800 rpm, Cover End:1/4 in; Port Type:22; Pressure Port Size, Shaft End:Standard Pilot; Integral Valve Configuration:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A14-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):3.4;
IHI 60 final drive,ihi 50 travel motor,ihi 35N excavator track motor,ih 55,ihi 70,ihi 80,ihi 30JX,ihi 120,ihi 40,ihi 45,ihi 65,Minor Diameter [Max:45.0 LB; Pilot Type:Flange Mount; Port Type:Right Hand (CW); Rotation:2520V17A14-1AA22R; Integral Valve Configuration:2.5; Shaft Seal Type:Flange; Shaft Length:1/4 in; Manufacturer Part No.:22; Port Orientation - Shaft End:Standard Pilot; Major Diameter [Max:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A14-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):3.4;
excavator track roller,sprocket,front ilder,ZAXIS60,ZX90,ZX110,ZX130,ZX160,ZX75,ZX200,ZX210,ZX220,ZX240,ZX230,ZX300,Spline Description:45.0 LB; Minor Diameter [Min:Flange Mount; Pump Series:Right Hand (CW); Weight:2520V17A14-1AA22R; Cover End RPM [Max:2.5; Shaft Key:Flange; Rotation:1/4 in; Port Type:22; Shaft End Pressure [Max:Standard Pilot; Shaft Dia.:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A14-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):3.4;
MITSUBISHI RUBBER TRACK,EXCAVATOR ME35 MIN DIGGER RUBBER TRACK,track motor,mx55/mx35/MM20,MM30,MM35,MM40CR,mm55,MM40SR,ME20,MM20Rotation:45.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Max. RPM [Max:Right Hand (CW); Minor Diameter [Max:2520V17A14-1AA22R; Cover End Pressure [Max:2.5; Cover End Flow @ RPM:Flange; Port Size:1/4 in; Mounting:22; Shaft Type:Standard Pilot; Port Orientation - Cover End:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A14-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):3.4;
TONG MYUNG FINAL DRIVE,HYDRAULIC TRAVEL MOTOR,TM07/TM09/TM10/TM18VC,TM22VC,TM24VC,Doosan excavator part:MBEZ043,MBEZ061/MBEZ068,Shaft End RPM [Max:45.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Manufacturer Part No.:2520V17A14-1AA22R; Controlled Flow Rate:2.5; Displacement Shaft End (cu in/revolution):Flange; Shaft End Pressure [Max:1/4 in; Shaft Seal Type:22; Seal Material:Standard Pilot; Pressure Port Size, Shaft End:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A14-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):3.4;
Doosan rubber track,SOLAR 130,DH215,DH220LC excavator rubber pad,DX130,DX260,DH55,DH60,DH75,DH160LC,S140,S60,S75,S90,S120,DX60Pilot Type:45.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Rotation:Right Hand (CW); Port Orientation - Cover End:2520V17A14-1AA22R; Mounting:2.5; Pressure Port Size, Shaft End:Flange; Weight:1/4 in; Shaft End Pressure [Max:22; Mounting Flange:Standard Pilot; Max. RPM [Max:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A14-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):3.4;
uchida hydraulic pump, excavator,AP2D25 pump,Doosan,Daewoo,Hyundai,Kubota,Kobelco,VolvoMinor Diameter [Min:45.0 LB; Controlled Flow Rate:Flange Mount; Port Type:Right Hand (CW); Rotation:2520V17A14-1AA22R; Relief Valve Setting:2.5; Port Orientation - Shaft End:Flange; Major Diameter [Min:1/4 in; Mounting:22; Pressure Port Size, Shaft End:Standard Pilot; Weight:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A14-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):3.4;
hyundai track link,sprocket,excavator track roller,kxbly,R210LC-7,R210-3,R160LC,R170LC.R190LC,R300LC,R330LC,R350,R360LCWeight:45.0 LB; Shaft Seal Type:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Shaft Dia.:2520V17A14-1AA22R; Shaft Length:2.5; Cover End RPM [Max:Flange; Integral Valve Configuration:1/4 in; Pressure Port Size, Shaft End:22; Manufacturer Part No.:Standard Pilot; GPM @ 1,800 rpm, Cover End:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A14-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):3.4;
min excavator rubber tracks ,Hyundai,Kobelco,Sumitomo,Kato,Bobcat,Ihi,Takeuchi,Kubota,DaewooMinor Diameter [Max:45.0 LB; Controlled Flow Rate:Flange Mount; Port Size:Right Hand (CW); Cover End Pressure [Max:2520V17A14-1AA22R; Spline Description:2.5; Model No.:Flange; Integral Valve Configuration:1/4 in; Pressure Port Size, Cover End:22; Port Type:Standard Pilot; Mounting:0.875 in; Shaft Type:Straight w/ Key; Pump Series:2520V; Shaft Length:2.32 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V17A14-1AA22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:25.5; Outlet Port Position [Rear:135° CCW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):3.4;

 

 

EX75UR FINAL DRIVE/TRAVEL DEVICE P/N:9133897,EX50 DRIVE MOTOR,ZX55 TRAVEL MOTOR Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

EX75UR FINAL DRIVE/TRAVEL DEVICE P/N:9133897,EX50 DRIVE MOTOR,ZX55 TRAVEL MOTOR Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Kawasaki pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed EX75UR FINAL DRIVE/TRAVEL DEVICE P/N:9133897,EX50 DRIVE MOTOR,ZX55 TRAVEL MOTOR Also Viewed

  • Bobcat 331 final drive,New Genuine excavator travel motor:MX331,MX337,MX341,E50,E32,E35,E43,E80,MX325,MX334,MX430,E45,E38,MXE32
  • BOBCAT Mini Excavator Rubber Track for digger:329 331 334 ME320 ME35,335,337,341,EMX50,MXE32,MXE43,MXE80,325,328,
  • Takeuchi TB65 final drive,TB55 excavator travel motor,TB25,TB15,TB16,TB020,TB25,TB125,TB45,TB145,TB70,TB175,TB60,TB35,TB18,TB40
  • Rubber Tracks For Bobcat Mini Excavators And Bobcat Compact Track Loaders T140 rubber track with 300x84x46 T180 T190 tracks
  • Takeuchi TB55 final drive,TB45 excavator travel motor,TB50,TB65,TB16,TB20,TB25,TB125,TB45,TB145,TB70,TB175,TB60,TB35,TB18,TB40
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us