Home>Products>Kawasaki pump>New EX35-2 Mini Excavator Final Drive and Track Travel Motor Complete Unit Part Number: MAG-18V-250-2 final drive
New EX35-2 Mini Excavator Final Drive and Track Travel Motor Complete Unit Part Number: MAG-18V-250-2 final drive MODELS
Need a CAD or 3D Model?
New EX35-2 Mini Excavator Final Drive and Track Travel Motor Complete Unit Part Number: MAG-18V-250-2 final drive
category
Kawasaki pump
New EX35-2 Mini Excavator Final Drive and Track Travel Motor Complete Unit Part Number: MAG-18V-250-2 final drive SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
New EX35-2 Mini Excavator Final Drive and Track Travel Motor Complete Unit Part Number: MAG-18V-250-2 final drive Technical information
- 1.375 in
- 14 Tooth Splined
- 3525V
- 2 5/16 in
- Buna-N
- 1800
- 1.055 in
- SAE C, 2 Bolt
- Single Shaft Seal
- 12/24
- 1800
- 1800
- N/A
- 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm
- 1.25 in
- 1.247 in
- 1.06 in
- 1.05 in
- N/A
- 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm
- 3525V30A14-11DD22R
- 2500
- 2500
- 21
- 45
- N/A
- Outlet 135° CW from Inlet
- Outlet 90° CW from Inlet
- 1 in Code 61
- 1 1/4 in Code 61
- 2.8
- 5.9
New EX35-2 Mini Excavator Final Drive and Track Travel Motor Complete Unit Part Number: MAG-18V-250-2 final drive Products and services
New Original DENSO 24 volt 35 Alternator,S6D102,101211-4310,126000-2310,24V,102211-2820,60086-13610.(102211-2850).60080-13420, | Port Orientation - Shaft End:76.0 LB; Cover End Flow @ RPM:Flange Mount; Port Type:Right Hand (CW); Minor Diameter [Min:3525V30A14-11DD22R; GPM @ 1,800 rpm, Cover End:3; Relief Valve Setting:Flange; Minor Diameter:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Major Diameter [Min:1.375 in; Pressure Port Size, Shaft End:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A14-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):5.9; |
Kobelco SK360 final drive,SK60 TRAVEL MOTOR,SK80,SK50UR,SK120,SK60-SK380,SK310,SK450,SK230,SK260,SK280 ,SK250,SK07-N2,SK32 | Port Size:76.0 LB; Major Diameter [Max:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Shaft End Pressure [Max:3525V30A14-11DD22R; GPM @ 1,800 rpm, Cover End:3; Minor Diameter:Flange; Cover End RPM [Max:N/A; Shaft Key:Standard Pilot; Integral Valve Configuration:1.375 in; Relief Valve Setting:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A14-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):5.9; |
Hyundai R55 rubber track,excavator,Robex 75,R70,R120,R90,R60,R55,R65,R80-7,R50,R190LC-5,R170LC-5,R205,R130,R140,400X72.5X74,R210 | Seal Material:76.0 LB; Controlled Flow Rate:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Major Diameter [Min:3525V30A14-11DD22R; Cover End Pressure [Max:3; Weight:Flange; Manufacturer Part No.:N/A; Model No.:Standard Pilot; Max. RPM [Max:1.375 in; Shaft End RPM [Max:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A14-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):5.9; |
Volvo rotation finale,Sumitomo rotation finale,Hyundai rotation finale,rotation finale | Manufacturer Part No.:76.0 LB; Shaft End Pressure [Max:Flange Mount; Pilot Type:Right Hand (CW); Integral Valve Configuration:3525V30A14-11DD22R; Pump Series:3; Port Orientation - Cover End:Flange; Major Diameter [Min:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Shaft Type:1.375 in; Major Diameter [Max:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A14-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):5.9; |
GM05 final drive,Nabtesco GM04 excavator travel motor,GM38,GM09,GM18,GM06,GM07,GM35,GM05VA,Kobelco,Hyundai,Doosan,Kubota, | Displacement Cover End (cu in/revolution):76.0 LB; Shaft Type:Flange Mount; Max. RPM [Max:Right Hand (CW); Major Diameter [Min:3525V30A14-11DD22R; Cover End Flow @ RPM:3; Minor Diameter [Min:Flange; Integral Valve Configuration:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Cover End Pressure [Max:1.375 in; Manufacturer Part No.:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A14-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):5.9; |
rubber track,excavator rubber track,engineering rubber track,rubber track for excavator, | Shaft Dia.:76.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Minor Diameter:Right Hand (CW); Spline Description:3525V30A14-11DD22R; Relief Valve Setting:3; Pump Series:Flange; Pilot Type:N/A; Model No.:Standard Pilot; Seal Material:1.375 in; Cover End Pressure [Max:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A14-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):5.9; |
Nachi excavator travel motor,final drive for Mitsubishi,kubota,caser:PHV-1B,PHV-2B,PHV-3B-35BP,PHV120-37-1,PHV-4B | Integral Valve Configuration:76.0 LB; Pressure Port Size, Cover End:Flange Mount; Major Diameter [Min:Right Hand (CW); Seal Material:3525V30A14-11DD22R; Cover End Flow @ RPM:3; Displacement Cover End (cu in/revolution):Flange; Shaft Seal Type:N/A; Port Size:Standard Pilot; Cover End Pressure [Max:1.375 in; Rotation:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A14-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):5.9; |
KPM SWING REDUCER,MOTOR,Excavator rotary motor,M5X180CHB-10A-89A-280,M2X63,M2X96,M2X120,M2X146,M2X150,M2X170, | Shaft Dia.:76.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Minor Diameter [Max:3525V30A14-11DD22R; Shaft Key:3; GPM @ 1,800 rpm, Cover End:Flange; Minor Diameter [Min:N/A; Rotation:Standard Pilot; GPM @ 1,800 rpm, Shaft End:1.375 in; Cover End Flow @ RPM:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A14-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):5.9; |
mini digger traveling motor,EX30 final drive,EX25,EX40,EX45,EX55,EX60,EX75,EX90,ZX45,ZX75,ZX55,ZX55,ZX60,EX100,EX70,ZX80, | Pressure Port Size, Shaft End:76.0 LB; Minor Diameter [Min:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Port Orientation - Cover End:3525V30A14-11DD22R; Spline Description:3; Seal Material:Flange; Integral Valve Configuration:N/A; Manufacturer Part No.:Standard Pilot; Cover End Pressure [Max:1.375 in; GPM @ 1,800 rpm, Cover End:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A14-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):5.9; |
excavator steel track,Doosan track shoe link,roller,DH220LC-5,DH215,DH330,DH300,DX300,DX260,DH375,DH360,DH55,DH60,DH75,DH160 | Spline Description:76.0 LB; Shaft End Flow @ RPM:Flange Mount; Pump Series:Right Hand (CW); GPM @ 1,800 rpm, Cover End:3525V30A14-11DD22R; Shaft End RPM [Max:3; Cover End Pressure [Max:Flange; Shaft Type:N/A; Controlled Flow Rate:Standard Pilot; Mounting Flange:1.375 in; Weight:14 Tooth Splined; Pump Series:3525V; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:1.055 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:1.25 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:1.06 in; Minor Diameter [Min:1.05 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525V30A14-11DD22R; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):5.9; |
New EX35-2 Mini Excavator Final Drive and Track Travel Motor Complete Unit Part Number: MAG-18V-250-2 final drive Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
New EX35-2 Mini Excavator Final Drive and Track Travel Motor Complete Unit Part Number: MAG-18V-250-2 final drive Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Kawasaki pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump
Customers Who Viewed New EX35-2 Mini Excavator Final Drive and Track Travel Motor Complete Unit Part Number: MAG-18V-250-2 final drive Also Viewed
- Bobcat 331 final drive,New Genuine excavator travel motor:MX331,MX337,MX341,E50,E32,E35,E43,E80,MX325,MX334,MX430,E45,E38,MXE32
- BOBCAT Mini Excavator Rubber Track for digger:329 331 334 ME320 ME35,335,337,341,EMX50,MXE32,MXE43,MXE80,325,328,
- Takeuchi TB65 final drive,TB55 excavator travel motor,TB25,TB15,TB16,TB020,TB25,TB125,TB45,TB145,TB70,TB175,TB60,TB35,TB18,TB40
- Rubber Tracks For Bobcat Mini Excavators And Bobcat Compact Track Loaders T140 rubber track with 300x84x46 T180 T190 tracks
- Takeuchi TB55 final drive,TB45 excavator travel motor,TB50,TB65,TB16,TB20,TB25,TB125,TB45,TB145,TB70,TB175,TB60,TB35,TB18,TB40