• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Kawasaki pump>Mini excavator final drive for MITSUBISHI ME35 travel motor,track motor,mx55/mx35/MM20,MM30,MM35B/MM40CR,mm55,MM40SR,ME20,MM45,

  • Mini excavator final drive for MITSUBISHI ME35 travel motor,track motor,mx55/mx35/MM20,MM30,MM35B/MM40CR,mm55,MM40SR,ME20,MM45,
  • Mini excavator final drive for MITSUBISHI ME35 travel motor,track motor,mx55/mx35/MM20,MM30,MM35B/MM40CR,mm55,MM40SR,ME20,MM45,

Mini excavator final drive for MITSUBISHI ME35 travel motor,track motor,mx55/mx35/MM20,MM30,MM35B/MM40CR,mm55,MM40SR,ME20,MM45, MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Mini excavator final drive for MITSUBISHI ME35 travel motor,track motor,mx55/mx35/MM20,MM30,MM35B/MM40CR,mm55,MM40SR,ME20,MM45,

category

Kawasaki pump

Mini excavator final drive for MITSUBISHI ME35 travel motor,track motor,mx55/mx35/MM20,MM30,MM35B/MM40CR,mm55,MM40SR,ME20,MM45, SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Mini excavator final drive for MITSUBISHI ME35 travel motor,track motor,mx55/mx35/MM20,MM30,MM35B/MM40CR,mm55,MM40SR,ME20,MM45, Technical information

  • 0.875 in
  • 13 Tooth Splined
  • V2010
  • 1 5/16 in
  • Buna-N
  • 2800
  • 0.728 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 3000
  • 2800
  • N/A
  • 3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.7335 in
  • 0.7225 in
  • N/A
  • 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm
  • V2010-1F8S3S-11DD12
  • 2500
  • 2500
  • 4.5
  • 12
  • N/A
  • Outlet 135° CW from Inlet
  • Outlet 90° CW from Inlet
  • 1/2 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 0.6
  • 1.62

Mini excavator final drive for MITSUBISHI ME35 travel motor,track motor,mx55/mx35/MM20,MM30,MM35B/MM40CR,mm55,MM40SR,ME20,MM45, Products and services

 

Kobelco SK45 rubber track:SK75UR excavator rubber pad,SK60,SK30,SK80,SK50,SK120,SK65,SK75-2,SK03,SK160,SK100,SK25,SK55,SK90,Mounting Flange:30.0 LB; Shaft End RPM [Max:Flange Mount; Integral Valve Configuration:Right Hand (CW); Minor Diameter [Max:V2010-1F8S3S-11DD12; Displacement Cover End (cu in/revolution):1 1/2; Manufacturer Part No.:Flange; Port Type:N/A; Shaft End Pressure [Max:N/A; GPM @ 1,800 rpm, Cover End:0.875 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.62;
IHI digger rubber track,ihi 50 excavator rubber track,ihi60,ihi 35N,ih 55,ihi 70,ihi 80,ihi 30JX,ihi 120,ihi 40,ihi 45,ihi 65,Pilot Type:30.0 LB; Relief Valve Setting:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Pressure Port Size, Cover End:V2010-1F8S3S-11DD12; GPM @ 1,800 rpm, Cover End:1 1/2; Mounting:Flange; Port Type:N/A; Shaft Dia.:N/A; Mounting Flange:0.875 in; Port Size:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.62;
NACHI Travel Motor,nachi final drive assembly,PHV-3B-35AP,for KOBELCO,Volvo,Sumitomo,Kubota,PHV-120,PHV-390,PHV-4B-60BP,Cover End RPM [Max:30.0 LB; Shaft Key:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Minor Diameter [Max:V2010-1F8S3S-11DD12; Port Orientation - Shaft End:1 1/2; Cover End Flow @ RPM:Flange; Weight:N/A; Seal Material:N/A; Port Orientation - Cover End:0.875 in; Pressure Port Size, Shaft End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.62;
Kawasaki main pump,K5V140DT EXCAVATOR PUMP,KAWASAKI HYDRUALIC PUMP,K5V80DTP,K3V112DT,K3V140DT,K3V63DT,K3V180DT,M2X25,SWING MOTORMajor Diameter [Max:30.0 LB; Port Type:Flange Mount; Spline Description:Right Hand (CW); Minor Diameter [Max:V2010-1F8S3S-11DD12; Shaft Type:1 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Shaft Key:N/A; Pressure Port Size, Shaft End:N/A; Integral Valve Configuration:0.875 in; Displacement Cover End (cu in/revolution):13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.62;
Doosan DX225LC-7 final drive,DX300LC-7 travel motor,DX330LC,DX340LC-7,DX360,DX220LC,DX215DX,DX55,DX60,DX80,DH220-5,DH225-7,GM35Cover End RPM [Max:30.0 LB; Weight:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Port Orientation - Cover End:V2010-1F8S3S-11DD12; Relief Valve Setting:1 1/2; Port Orientation - Shaft End:Flange; Minor Diameter:N/A; Shaft Type:N/A; Major Diameter [Max:0.875 in; Pump Series:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.62;
KYB swing reduction,slewing device,swing motor,Kayaba MSG-27P-18E,KYB MSG-44P-21-12, KYB B0250-44012,for excavator bulldozer,Seal Material:30.0 LB; Minor Diameter [Max:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Pilot Type:V2010-1F8S3S-11DD12; GPM @ 1,800 rpm, Cover End:1 1/2; Shaft Dia.:Flange; Port Orientation - Cover End:N/A; Displacement Cover End (cu in/revolution):N/A; Manufacturer Part No.:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.62;
VOLVO EC460B Travel device,EC360B Travel device assy,VOE1456965,EC240B final drive,14551150K,EC160B,EC290B,EC210B,EC330B,EC370BModel No.:30.0 LB; Shaft Length:Flange Mount; Port Type:Right Hand (CW); Spline Description:V2010-1F8S3S-11DD12; Shaft End Pressure [Max:1 1/2; Mounting Flange:Flange; Relief Valve Setting:N/A; Pilot Type:N/A; Pressure Port Size, Shaft End:0.875 in; GPM @ 1,800 rpm, Shaft End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.62;
CLIP ON RUBBER TRACK PAD,EXCAVATOR RUBBER 600mm,450mm,400mm,Doosan,Daewoo,Hyundai,Kobelco,Volvo,Sumitomo,Kubota,samsung,Pressure Port Size, Shaft End:30.0 LB; Rotation:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); Minor Diameter [Min:V2010-1F8S3S-11DD12; Pressure Port Size, Cover End:1 1/2; Relief Valve Setting:Flange; Mounting:N/A; Shaft Length:N/A; Shaft Type:0.875 in; GPM @ 1,800 rpm, Shaft End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.62;
Doosan excavator upper roller,sprocket,idler,DX55,DX60,DX70,DX120,DX220,DX300,DX330,DX225,DH370-7;DH420-7;DH500-7;S400-3;S450-Port Orientation - Cover End:30.0 LB; Max. RPM [Max:Flange Mount; Rotation:Right Hand (CW); Shaft Type:V2010-1F8S3S-11DD12; Shaft Seal Type:1 1/2; Pilot Type:Flange; Minor Diameter [Min:N/A; Minor Diameter [Max:N/A; Pressure Port Size, Cover End:0.875 in; Displacement Shaft End (cu in/revolution):13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.62;
KOBELCO SK200-8 TRAVEL MOTOR,YN15V00037F2 NABTESCO GM38VB travel motor,SK200-8 final driveIntegral Valve Configuration:30.0 LB; Port Orientation - Cover End:Flange Mount; Minor Diameter [Max:Right Hand (CW); Pressure Port Size, Shaft End:V2010-1F8S3S-11DD12; Spline Description:1 1/2; Max. RPM [Max:Flange; Shaft Seal Type:N/A; Pressure Port Size, Cover End:N/A; Cover End Flow @ RPM:0.875 in; Minor Diameter:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F8S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:12; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.62;

 

 

Mini excavator final drive for MITSUBISHI ME35 travel motor,track motor,mx55/mx35/MM20,MM30,MM35B/MM40CR,mm55,MM40SR,ME20,MM45, Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

Mini excavator final drive for MITSUBISHI ME35 travel motor,track motor,mx55/mx35/MM20,MM30,MM35B/MM40CR,mm55,MM40SR,ME20,MM45, Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Kawasaki pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed Mini excavator final drive for MITSUBISHI ME35 travel motor,track motor,mx55/mx35/MM20,MM30,MM35B/MM40CR,mm55,MM40SR,ME20,MM45, Also Viewed

  • Bobcat 331 final drive,New Genuine excavator travel motor:MX331,MX337,MX341,E50,E32,E35,E43,E80,MX325,MX334,MX430,E45,E38,MXE32
  • BOBCAT Mini Excavator Rubber Track for digger:329 331 334 ME320 ME35,335,337,341,EMX50,MXE32,MXE43,MXE80,325,328,
  • Takeuchi TB65 final drive,TB55 excavator travel motor,TB25,TB15,TB16,TB020,TB25,TB125,TB45,TB145,TB70,TB175,TB60,TB35,TB18,TB40
  • Rubber Tracks For Bobcat Mini Excavators And Bobcat Compact Track Loaders T140 rubber track with 300x84x46 T180 T190 tracks
  • Takeuchi TB55 final drive,TB45 excavator travel motor,TB50,TB65,TB16,TB20,TB25,TB125,TB45,TB145,TB70,TB175,TB60,TB35,TB18,TB40
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us