• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>Kawasaki pump>EXCAVATOR MITSUBISHI RUBBER TRACK,ME35 MIN DIGGER RUBBER TRACK,track motor,mx55/mx35/MM20,MM30,MM35,MM40CR,mm55,MM40SR,ME20,MM20

  • EXCAVATOR MITSUBISHI RUBBER TRACK,ME35 MIN DIGGER RUBBER TRACK,track motor,mx55/mx35/MM20,MM30,MM35,MM40CR,mm55,MM40SR,ME20,MM20
  • EXCAVATOR MITSUBISHI RUBBER TRACK,ME35 MIN DIGGER RUBBER TRACK,track motor,mx55/mx35/MM20,MM30,MM35,MM40CR,mm55,MM40SR,ME20,MM20

EXCAVATOR MITSUBISHI RUBBER TRACK,ME35 MIN DIGGER RUBBER TRACK,track motor,mx55/mx35/MM20,MM30,MM35,MM40CR,mm55,MM40SR,ME20,MM20 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

EXCAVATOR MITSUBISHI RUBBER TRACK,ME35 MIN DIGGER RUBBER TRACK,track motor,mx55/mx35/MM20,MM30,MM35,MM40CR,mm55,MM40SR,ME20,MM20

category

Kawasaki pump

EXCAVATOR MITSUBISHI RUBBER TRACK,ME35 MIN DIGGER RUBBER TRACK,track motor,mx55/mx35/MM20,MM30,MM35,MM40CR,mm55,MM40SR,ME20,MM20 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

EXCAVATOR MITSUBISHI RUBBER TRACK,ME35 MIN DIGGER RUBBER TRACK,track motor,mx55/mx35/MM20,MM30,MM35,MM40CR,mm55,MM40SR,ME20,MM20 Technical information

  • 1.375 in
  • Straight w/ Key
  • 3520V
  • 3 7/8 in
  • Buna-N
  • 1800
  • N/A
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • N/A
  • 1800
  • 1800
  • N/A
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
  • 3520V25A11-86BB22R
  • 3000
  • 2500
  • 16.5
  • 37.5
  • N/A
  • Outlet 45° CCW from Inlet
  • Outlet 90° CCW from Inlet
  • 3/4 in Code 61
  • 1 1/4 in Code 61
  • 2.2
  • 4.9

EXCAVATOR MITSUBISHI RUBBER TRACK,ME35 MIN DIGGER RUBBER TRACK,track motor,mx55/mx35/MM20,MM30,MM35,MM40CR,mm55,MM40SR,ME20,MM20 Products and services

 

Volvo EC360B travel motor,EC360B final drive,VOE 14551150K,EC240B,EC290B,14551154,EC210B,14528732,EC330BLC,EC300B,EC370B,EC460BShaft Type:75.0 LB; Spline Description:Flange Mount; Shaft Seal Type:Right Hand (CW); Shaft End RPM [Max:3520V25A11-86BB22R; Minor Diameter [Max:3; Port Orientation - Shaft End:Flange; Manufacturer Part No.:5/16 in; Pressure Port Size, Cover End:Standard Pilot; Integral Valve Configuration:1.375 in; Cover End RPM [Max:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-86BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
excavator guide wheel,track roller,driving wheel,chain wheelShaft End Pressure [Max:75.0 LB; Max. RPM [Max:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Pressure Port Size, Cover End:3520V25A11-86BB22R; Port Orientation - Cover End:3; Port Size:Flange; Shaft End Flow @ RPM:5/16 in; Weight:Standard Pilot; GPM @ 1,800 rpm, Shaft End:1.375 in; Shaft Key:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-86BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
EX35U final drive,ZX27U excavator travel motor,EX25,EX40,EX27,EX55,EX60,EX75,ZX70,ZX45,ZX75,ZX90,ZX55,ZX27U-2,ZX60,ZX50Weight:75.0 LB; Port Orientation - Shaft End:Flange Mount; Port Orientation - Cover End:Right Hand (CW); Port Type:3520V25A11-86BB22R; Pressure Port Size, Cover End:3; Max. RPM [Max:Flange; Mounting:5/16 in; Cover End RPM [Max:Standard Pilot; Rotation:1.375 in; Spline Description:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-86BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
Doosan DH360LC main pump,DH220LC,DH225LC-7 hydraulic pump,K3V112DT,K3V140DT,K5V80DTP:SOLAR140,S160,DH280,DH320,DH450LC,motorMinor Diameter:75.0 LB; Cover End Pressure [Max:Flange Mount; Shaft Dia.:Right Hand (CW); Pressure Port Size, Shaft End:3520V25A11-86BB22R; Shaft End Pressure [Max:3; Minor Diameter [Min:Flange; Manufacturer Part No.:5/16 in; Displacement Cover End (cu in/revolution):Standard Pilot; Cover End RPM [Max:1.375 in; Weight:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-86BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
Takeuchi excavator pump,hydraulic pump,TB125,TB16,TB20,TB25,TB45,TB145,TB70,TB80,TB155,TB175,TB128,KYB,PSVD2-21,PVD-2B,AP2D25Port Type:75.0 LB; Minor Diameter [Max:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Shaft End RPM [Max:3520V25A11-86BB22R; Port Orientation - Shaft End:3; Shaft Type:Flange; Minor Diameter [Min:5/16 in; Cover End Flow @ RPM:Standard Pilot; Pilot Type:1.375 in; Shaft Length:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-86BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
excavator injector,hydraulic excavator engine fuel injectorShaft End RPM [Max:75.0 LB; Shaft Type:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Pressure Port Size, Shaft End:3520V25A11-86BB22R; Shaft Seal Type:3; Minor Diameter [Min:Flange; Controlled Flow Rate:5/16 in; Cover End Pressure [Max:Standard Pilot; Major Diameter [Max:1.375 in; Major Diameter [Min:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-86BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
JEIL Excavator hydraulic final drive,Hyundai,Daewoo,Doosan,Sumitomo,JMV-23/21,JMV-44/22,JMV-47/27,JMV-53/34,JMV-53/31,JMV-76/45Cover End Flow @ RPM:75.0 LB; Pilot Type:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Shaft Length:3520V25A11-86BB22R; GPM @ 1,800 rpm, Shaft End:3; Cover End Pressure [Max:Flange; Displacement Cover End (cu in/revolution):5/16 in; Minor Diameter:Standard Pilot; Model No.:1.375 in; Major Diameter [Max:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-86BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
Doosan DH330LC-7 excavator cylinder,boom arm DH225LC bucket cylinder,DH290LC,DH210-7,DH375,DH255,R320-2,DH170LC,DH300,DH360LC-7Major Diameter [Min:75.0 LB; Shaft End Flow @ RPM:Flange Mount; Integral Valve Configuration:Right Hand (CW); Shaft Type:3520V25A11-86BB22R; Port Orientation - Cover End:3; Mounting:Flange; Seal Material:5/16 in; Pump Series:Standard Pilot; Cover End Flow @ RPM:1.375 in; Shaft Key:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-86BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
Doosan Solar 225LC final drive,Solar 300LC travel motor,SOLAR 130,Solar 140,Solar 170,SOLAR 225,Solar 360LC,SOLAR 80,Solar 55,Port Orientation - Cover End:75.0 LB; Shaft Type:Flange Mount; Major Diameter [Max:Right Hand (CW); Relief Valve Setting:3520V25A11-86BB22R; Port Orientation - Shaft End:3; Mounting:Flange; Pilot Type:5/16 in; Cover End RPM [Max:Standard Pilot; Mounting Flange:1.375 in; Displacement Cover End (cu in/revolution):Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-86BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;
Kobelco,Daewoo,Volvo,Kubota,Sumitomo,Hyundai,Kato excavator cab,excavator cabinWeight:75.0 LB; Shaft End Flow @ RPM:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Major Diameter [Max:3520V25A11-86BB22R; Displacement Shaft End (cu in/revolution):3; Manufacturer Part No.:Flange; Pump Series:5/16 in; Port Type:Standard Pilot; Model No.:1.375 in; Controlled Flow Rate:Straight w/ Key; Pump Series:3520V; Shaft Length:3 7/8 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520V25A11-86BB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CCW from Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.2; Displacement Shaft End (cu in/revolution):4.9;

 

 

EXCAVATOR MITSUBISHI RUBBER TRACK,ME35 MIN DIGGER RUBBER TRACK,track motor,mx55/mx35/MM20,MM30,MM35,MM40CR,mm55,MM40SR,ME20,MM20 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

EXCAVATOR MITSUBISHI RUBBER TRACK,ME35 MIN DIGGER RUBBER TRACK,track motor,mx55/mx35/MM20,MM30,MM35,MM40CR,mm55,MM40SR,ME20,MM20 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

Kawasaki pump CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed EXCAVATOR MITSUBISHI RUBBER TRACK,ME35 MIN DIGGER RUBBER TRACK,track motor,mx55/mx35/MM20,MM30,MM35,MM40CR,mm55,MM40SR,ME20,MM20 Also Viewed

  • Bobcat 331 final drive,New Genuine excavator travel motor:MX331,MX337,MX341,E50,E32,E35,E43,E80,MX325,MX334,MX430,E45,E38,MXE32
  • BOBCAT Mini Excavator Rubber Track for digger:329 331 334 ME320 ME35,335,337,341,EMX50,MXE32,MXE43,MXE80,325,328,
  • Takeuchi TB65 final drive,TB55 excavator travel motor,TB25,TB15,TB16,TB020,TB25,TB125,TB45,TB145,TB70,TB175,TB60,TB35,TB18,TB40
  • Rubber Tracks For Bobcat Mini Excavators And Bobcat Compact Track Loaders T140 rubber track with 300x84x46 T180 T190 tracks
  • Takeuchi TB55 final drive,TB45 excavator travel motor,TB50,TB65,TB16,TB20,TB25,TB125,TB45,TB145,TB70,TB175,TB60,TB35,TB18,TB40
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us