Home>Products>Kawasaki pump>Bobcat 331 final drive,Genuine travel motor:MX337 excavator,341,E50,E32,E35,E43,E80,MX331,334,430,E45,E38,E32,328,MX325,328,
Bobcat 331 final drive,Genuine travel motor:MX337 excavator,341,E50,E32,E35,E43,E80,MX331,334,430,E45,E38,E32,328,MX325,328, MODELS
Need a CAD or 3D Model?
Bobcat 331 final drive,Genuine travel motor:MX337 excavator,341,E50,E32,E35,E43,E80,MX331,334,430,E45,E38,E32,328,MX325,328,
category
Kawasaki pump
Bobcat 331 final drive,Genuine travel motor:MX337 excavator,341,E50,E32,E35,E43,E80,MX331,334,430,E45,E38,E32,328,MX325,328, SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Bobcat 331 final drive,Genuine travel motor:MX337 excavator,341,E50,E32,E35,E43,E80,MX331,334,430,E45,E38,E32,328,MX325,328, Technical information
- #8 SAE O-Ring Port - Bottom (Top Plugged)
- 2 in 4-Bolt Flange/Code 61
- N/A
- 14 Tooth Splined
- 26 gpm @ 1800 rpm
- 1 in 4-Bolt Flange/Code 61
- Pressure Compensator
- 1.89 in
- Side Port
- Viton
- None
- 26
- SAE C, 4 Bolt
- Q250 Valve Plate, No Case To Inlet Check Valve
- 14 Tooth Splined
- No Auxiliary Mounting Features
- 3.5
- None
- None
- 3625
- 957-1,073 psi
- Standard Displacement
Bobcat 331 final drive,Genuine travel motor:MX337 excavator,341,E50,E32,E35,E43,E80,MX331,334,430,E45,E38,E32,328,MX325,328, Products and services
PC200-8 Excavator Turbocharger,6754-81-8090,D375 Bulldozer Turbocharger,6505-61-5041,S6D170,WA380-3,600-181-1600 | Shaft End Pressure [Max:N/A; Major Diameter [Min:N/A; Cover End Flow @ RPM:Piston Pumps; Shaft End Flow @ RPM:PVH; Mounting:0.0 LB; Shaft Type:Right Hand (CW); Pilot Type:Flange; Model No.:Variable Displacement Open Circuit; Cover End Pressure [Max:#8 SAE O-Ring Port - Bottom (Top Plugged); Minor Diameter [Max:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Uchida hydraulic pump parts,AP2D12,AP2D18,AP2D25,AP2D28,AP2D36,tractor,axial piston pump, drive shaft, cylinder block, piston | Displacement Shaft End (cu in/revolution):N/A; Weight:N/A; Shaft Dia.:Piston Pumps; Integral Valve Configuration:PVH; Shaft End Pressure [Max:0.0 LB; Cover End Pressure [Max:Right Hand (CW); Cover End RPM [Max:Flange; Pilot Type:Variable Displacement Open Circuit; Minor Diameter:#8 SAE O-Ring Port - Bottom (Top Plugged); Minor Diameter [Min:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Kobelco SK75 excavator quick hitch,SK45 Hydraulic hitch,SK30,SK40,SK50,SK60,SK80,SK902,SK100,SK120,SK150,SK160,SK210,SK200-6, | Port Orientation - Shaft End:N/A; Shaft End Flow @ RPM:N/A; Port Size:Piston Pumps; Mounting:PVH; Pump Series:0.0 LB; Pressure Port Size, Cover End:Right Hand (CW); Cover End RPM [Max:Flange; Shaft Seal Type:Variable Displacement Open Circuit; Shaft End RPM [Max:#8 SAE O-Ring Port - Bottom (Top Plugged); Port Type:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Kubota excavator final drive,KX161 min digger travel motor:KX121-2,KX136,KX73,KX42,KX41,KX71,KX91,KX75,KX45,KX151,KX163,KX83 | Controlled Flow Rate:N/A; Shaft End Flow @ RPM:N/A; Minor Diameter:Piston Pumps; Pump Series:PVH; Shaft Type:0.0 LB; Pressure Port Size, Shaft End:Right Hand (CW); Cover End Pressure [Max:Flange; Mounting:Variable Displacement Open Circuit; Pilot Type:#8 SAE O-Ring Port - Bottom (Top Plugged); Displacement Cover End (cu in/revolution):2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
GM18 travel motor,GM03 Final drive for excavator,Walking Motor,track device,GM04,GM06,GM18,GM21,GM24,GM35,GM05,kobelco,Hyundai | Seal Material:N/A; Shaft Key:N/A; Rotation:Piston Pumps; Shaft End RPM [Max:PVH; GPM @ 1,800 rpm, Cover End:0.0 LB; Port Size:Right Hand (CW); Shaft Dia.:Flange; Spline Description:Variable Displacement Open Circuit; Mounting Flange:#8 SAE O-Ring Port - Bottom (Top Plugged); Minor Diameter [Min:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Doosan dx260 travel motor, excavator final drive :DX55,DX60,DX70,DX75,DX80,DX130,DX140,DX225,DX210,DX330,DX420,DX220,DX225, | Port Size:N/A; Mounting Flange:N/A; Major Diameter [Max:Piston Pumps; Controlled Flow Rate:PVH; Cover End Pressure [Max:0.0 LB; Pump Series:Right Hand (CW); Spline Description:Flange; Port Type:Variable Displacement Open Circuit; Pressure Port Size, Cover End:#8 SAE O-Ring Port - Bottom (Top Plugged); Max. RPM [Max:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Uchida Rexroth AP2D25 hydraulic pump,AP2D28,AP2D36,DOOSAN K1022715B EXCAVATOR MAIN PUMP,,DH55,pump part,piston,block, | Major Diameter [Min:N/A; Port Type:N/A; Cover End RPM [Max:Piston Pumps; Spline Description:PVH; Displacement Cover End (cu in/revolution):0.0 LB; Weight:Right Hand (CW); Seal Material:Flange; Shaft End Pressure [Max:Variable Displacement Open Circuit; Minor Diameter [Max:#8 SAE O-Ring Port - Bottom (Top Plugged); Manufacturer Part No.:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Genuine Hyundai R110-7 excavator controller 21N3-32102,21N8-32401,21N6-43101,21N6-42101,Hyundai Robex 225-7,RX215-7/R220-5 | Minor Diameter [Max:N/A; Shaft Seal Type:N/A; Spline Description:Piston Pumps; Rotation:PVH; Pump Series:0.0 LB; Controlled Flow Rate:Right Hand (CW); Manufacturer Part No.:Flange; Minor Diameter [Min:Variable Displacement Open Circuit; Max. RPM [Max:#8 SAE O-Ring Port - Bottom (Top Plugged); Shaft Length:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
EX35U final drive,ZX27U excavator travel motor,EX25,EX40,EX27,EX55,EX60,EX75,ZX70,ZX45,ZX75,ZX90,ZX55,ZX27U-2,ZX60,ZX50 | Cover End Pressure [Max:N/A; Shaft Type:N/A; Port Orientation - Shaft End:Piston Pumps; Mounting Flange:PVH; Integral Valve Configuration:0.0 LB; Seal Material:Right Hand (CW); Weight:Flange; Shaft Length:Variable Displacement Open Circuit; Model No.:#8 SAE O-Ring Port - Bottom (Top Plugged); Cover End RPM [Max:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Volvo EC210B swing motor,M2X120B-CHB,MFC-80-020,EC240 excavator slewing motor,M2X63CHB,M2X146B-CHB,M2X170,EC160B,EC140B,M5X130CH | Cover End Pressure [Max:N/A; GPM @ 1,800 rpm, Shaft End:N/A; Weight:Piston Pumps; Port Size:PVH; GPM @ 1,800 rpm, Cover End:0.0 LB; Relief Valve Setting:Right Hand (CW); Shaft Length:Flange; Major Diameter [Max:Variable Displacement Open Circuit; Minor Diameter [Max:#8 SAE O-Ring Port - Bottom (Top Plugged); Shaft Dia.:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Bobcat 331 final drive,Genuine travel motor:MX337 excavator,341,E50,E32,E35,E43,E80,MX331,334,430,E45,E38,E32,328,MX325,328, Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Bobcat 331 final drive,Genuine travel motor:MX337 excavator,341,E50,E32,E35,E43,E80,MX331,334,430,E45,E38,E32,328,MX325,328, Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Kawasaki pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump
Customers Who Viewed Bobcat 331 final drive,Genuine travel motor:MX337 excavator,341,E50,E32,E35,E43,E80,MX331,334,430,E45,E38,E32,328,MX325,328, Also Viewed
- Bobcat 331 final drive,New Genuine excavator travel motor:MX331,MX337,MX341,E50,E32,E35,E43,E80,MX325,MX334,MX430,E45,E38,MXE32
- BOBCAT Mini Excavator Rubber Track for digger:329 331 334 ME320 ME35,335,337,341,EMX50,MXE32,MXE43,MXE80,325,328,
- Takeuchi TB65 final drive,TB55 excavator travel motor,TB25,TB15,TB16,TB020,TB25,TB125,TB45,TB145,TB70,TB175,TB60,TB35,TB18,TB40
- Rubber Tracks For Bobcat Mini Excavators And Bobcat Compact Track Loaders T140 rubber track with 300x84x46 T180 T190 tracks
- Takeuchi TB55 final drive,TB45 excavator travel motor,TB50,TB65,TB16,TB20,TB25,TB125,TB45,TB145,TB70,TB175,TB60,TB35,TB18,TB40