Home>Products>Kawasaki pump>hyundai track link,R220LC-5,R215,R210LC-7,R210-3,R160LC,R170LC.R190LC,R300LC,R330LC,R350,R360LC
hyundai track link,R220LC-5,R215,R210LC-7,R210-3,R160LC,R170LC.R190LC,R300LC,R330LC,R350,R360LC MODELS
Need a CAD or 3D Model?
hyundai track link,R220LC-5,R215,R210LC-7,R210-3,R160LC,R170LC.R190LC,R300LC,R330LC,R350,R360LC
category
Kawasaki pump
hyundai track link,R220LC-5,R215,R210LC-7,R210-3,R160LC,R170LC.R190LC,R300LC,R330LC,R350,R360LC SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
hyundai track link,R220LC-5,R215,R210LC-7,R210-3,R160LC,R170LC.R190LC,R300LC,R330LC,R350,R360LC Technical information
- #10 SAE O-Ring Port - Bottom (Top Plugged)
- 2 1/2 in 4-Bolt Flange/Code 61
- N/A
- 14 Tooth Splined
- 45 gpm @ 1800 rpm
- 1 in 4-Bolt Flange/Code 61
- Pressure And Flow Compensator
- 1.89 in
- Side Port
- Viton
- None
- 45
- SAE C, 4 Bolt
- None
- 14 Tooth Splined
- No Auxiliary Mounting Features
- 6
- None
- 3625
- 3,568-3,684 psi
- Standard Displacement
hyundai track link,R220LC-5,R215,R210LC-7,R210-3,R160LC,R170LC.R190LC,R300LC,R330LC,R350,R360LC Products and services
Sumitomo A1 A2 excavator computer controller KHR1885 SH210A1 A2 KHR-1794 KHR1794 Sumitomo Computer Board | Shaft End RPM [Max:N/A; Port Type:No Paint; Shaft End Flow @ RPM:Piston Pumps; Port Orientation - Cover End:PVH; Displacement Shaft End (cu in/revolution):0.0 LB; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Minor Diameter [Min:Flange; Cover End RPM [Max:Variable Displacement Open Circuit; Shaft Dia.:#10 SAE O-Ring Port - Bottom (Top Plugged); Seal Material:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:45 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure And Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:45; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):6; Control Special Features:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
Doosan DH300-7 FINAL DRIVE,K1001992,DAEWOO S300-7 TRAVEL MOTOR,170403-00003,2404-9007,R55,R60-7,DH80-7,DH55,DH70,DH80G,DH75,DH90 | GPM @ 1,800 rpm, Cover End:N/A; Cover End Flow @ RPM:No Paint; Port Type:Piston Pumps; Shaft Key:PVH; Controlled Flow Rate:0.0 LB; Cover End RPM [Max:Right Hand (CW); Minor Diameter [Max:Flange; Shaft End Pressure [Max:Variable Displacement Open Circuit; Pressure Port Size, Shaft End:#10 SAE O-Ring Port - Bottom (Top Plugged); Shaft Dia.:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:45 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure And Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:45; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):6; Control Special Features:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
ZX55 track motor P/N:9212252,EX75UR-3 travel motor HMGB08EA excavator final drive | Rotation:N/A; Port Type:No Paint; Port Size:Piston Pumps; Shaft Dia.:PVH; Cover End RPM [Max:0.0 LB; Pump Series:Right Hand (CW); Pressure Port Size, Shaft End:Flange; Displacement Shaft End (cu in/revolution):Variable Displacement Open Circuit; Weight:#10 SAE O-Ring Port - Bottom (Top Plugged); Shaft Length:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:45 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure And Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:45; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):6; Control Special Features:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
zx50 final drive,ZX55 excavator Travel motor P/N:9212252,KAYABA KYB MAG-18VP,MAG-26VP,MAG-33VP | Shaft Length:N/A; Cover End Pressure [Max:No Paint; Mounting Flange:Piston Pumps; Shaft Dia.:PVH; Cover End RPM [Max:0.0 LB; Manufacturer Part No.:Right Hand (CW); Rotation:Flange; Major Diameter [Max:Variable Displacement Open Circuit; GPM @ 1,800 rpm, Shaft End:#10 SAE O-Ring Port - Bottom (Top Plugged); Model No.:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:45 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure And Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:45; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):6; Control Special Features:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
kobelco cylinder,boom cylinder,bucket cylinder,SK60-3,SK90,SK100-2,SK120,SK200-6,SK220,SK230-8,SK250,SK280,SK330,SK380 | Rotation:N/A; Port Orientation - Shaft End:No Paint; Minor Diameter [Max:Piston Pumps; Shaft Type:PVH; Displacement Shaft End (cu in/revolution):0.0 LB; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Weight:Flange; Minor Diameter [Min:Variable Displacement Open Circuit; Seal Material:#10 SAE O-Ring Port - Bottom (Top Plugged); Pump Series:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:45 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure And Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:45; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):6; Control Special Features:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
Kubota KX175 excavator pump,KX165 hydraulic main pump,for KX121-3,KX92,KX161,KX42,KX43,KX45.KX65,KX61,KX63,KX73,KX191,KX172,KX85 | Cover End Pressure [Max:N/A; Rotation:No Paint; Major Diameter [Max:Piston Pumps; Minor Diameter [Max:PVH; Seal Material:0.0 LB; Shaft Dia.:Right Hand (CW); Shaft End Flow @ RPM:Flange; Cover End Flow @ RPM:Variable Displacement Open Circuit; Pressure Port Size, Cover End:#10 SAE O-Ring Port - Bottom (Top Plugged); Relief Valve Setting:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:45 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure And Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:45; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):6; Control Special Features:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
SK220 final drive,Kobelco SK55,SK30,SK45,SK90,SK50,SK120-8,SK60,SK75 travel motor,S035,SK03 drive motor,SK100,SK80,SK120LC pump, | Minor Diameter [Min:N/A; Pressure Port Size, Shaft End:No Paint; Shaft Type:Piston Pumps; Cover End Pressure [Max:PVH; Shaft End RPM [Max:0.0 LB; Spline Description:Right Hand (CW); GPM @ 1,800 rpm, Cover End:Flange; Cover End RPM [Max:Variable Displacement Open Circuit; GPM @ 1,800 rpm, Shaft End:#10 SAE O-Ring Port - Bottom (Top Plugged); Shaft End Flow @ RPM:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:45 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure And Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:45; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):6; Control Special Features:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
Hyundai excavator cab,R225LC-5 operator drive cabin,R120,R140,R290LC,R210-7,R375,R290,R320,R220,R170LC,R360LC,R80,R55,R60,R75 | Shaft End Pressure [Max:N/A; Max. RPM [Max:No Paint; Relief Valve Setting:Piston Pumps; Shaft Type:PVH; Major Diameter [Max:0.0 LB; Displacement Shaft End (cu in/revolution):Right Hand (CW); Manufacturer Part No.:Flange; Shaft Key:Variable Displacement Open Circuit; Cover End Pressure [Max:#10 SAE O-Ring Port - Bottom (Top Plugged); Pump Series:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:45 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure And Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:45; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):6; Control Special Features:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
Doosan Solar 225LC final drive,Solar 300LC travel motor,SOLAR 130,Solar 140,Solar 170,SOLAR 225,Solar 360LC,SOLAR 80,Solar 55, | Mounting Flange:N/A; Pump Series:No Paint; Model No.:Piston Pumps; Manufacturer Part No.:PVH; Controlled Flow Rate:0.0 LB; Weight:Right Hand (CW); Shaft Seal Type:Flange; Mounting:Variable Displacement Open Circuit; Major Diameter [Min:#10 SAE O-Ring Port - Bottom (Top Plugged); Shaft End RPM [Max:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:45 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure And Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:45; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):6; Control Special Features:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
Kubota KX92 travel motor,KX135 mini digger final drive:KX163,KX73,KX155,KX165,KX91,KX161,KX63,KX183,KX85,KX62,KX175,RX501 PUMP | GPM @ 1,800 rpm, Shaft End:N/A; Pressure Port Size, Shaft End:No Paint; Port Size:Piston Pumps; Mounting Flange:PVH; Controlled Flow Rate:0.0 LB; Displacement Cover End (cu in/revolution):Right Hand (CW); Major Diameter [Min:Flange; Shaft Key:Variable Displacement Open Circuit; Major Diameter [Max:#10 SAE O-Ring Port - Bottom (Top Plugged); Port Type:2 1/2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:45 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure And Flow Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:45; Mounting Flange:SAE C, 4 Bolt; Special Features:None; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):6; Control Special Features:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:3,568-3,684 psi; Maximum Displacement Adjustment:Standard Displacement; |
hyundai track link,R220LC-5,R215,R210LC-7,R210-3,R160LC,R170LC.R190LC,R300LC,R330LC,R350,R360LC Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
hyundai track link,R220LC-5,R215,R210LC-7,R210-3,R160LC,R170LC.R190LC,R300LC,R330LC,R350,R360LC Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Kawasaki pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump
Customers Who Viewed hyundai track link,R220LC-5,R215,R210LC-7,R210-3,R160LC,R170LC.R190LC,R300LC,R330LC,R350,R360LC Also Viewed
- Bobcat 331 final drive,New Genuine excavator travel motor:MX331,MX337,MX341,E50,E32,E35,E43,E80,MX325,MX334,MX430,E45,E38,MXE32
- BOBCAT Mini Excavator Rubber Track for digger:329 331 334 ME320 ME35,335,337,341,EMX50,MXE32,MXE43,MXE80,325,328,
- Takeuchi TB65 final drive,TB55 excavator travel motor,TB25,TB15,TB16,TB020,TB25,TB125,TB45,TB145,TB70,TB175,TB60,TB35,TB18,TB40
- Rubber Tracks For Bobcat Mini Excavators And Bobcat Compact Track Loaders T140 rubber track with 300x84x46 T180 T190 tracks
- Takeuchi TB55 final drive,TB45 excavator travel motor,TB50,TB65,TB16,TB20,TB25,TB125,TB45,TB145,TB70,TB175,TB60,TB35,TB18,TB40