Home>Products>Rexroth pump>Engine Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING) ,Engine Overhaul Gasket Kit
Engine Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING) ,Engine Overhaul Gasket Kit MODELS
Need a CAD or 3D Model?
Engine Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING) ,Engine Overhaul Gasket Kit
category
Rexroth pump
Engine Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING) ,Engine Overhaul Gasket Kit SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Engine Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING) ,Engine Overhaul Gasket Kit Systems
- 21 gpm @ 1200 rpm
- 0.855 in
- 13 Tooth Splined
- 31.5 gpm @ 1800 rpm
- 25VQT
- 1 5/16 in
- 1 in Flange
- Buna-N
- 2500
- 3000 psi
- 31 1/2
- SAE B, 2 Bolt
- Single Shaft Seal
- 90° CCW from Inlet
- 25VQTAS21A-2297BA 20R
- 4.12
- SAE A, 2 Bolt
- Rotated 45° CW w/Respect to Mounting Flange
Engine Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING) ,Engine Overhaul Gasket Kit Dimensions
excavator engine part 4TNV94L | Port Orientation - Shaft End:43.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); GPM @ 1,800 rpm, Cover End:25VQTAS21A-2297BA 20R; Spline Description:2 1/2; Major Diameter [Max:Flange; Manufacturer Part No.:N/A; Port Size:20; Shaft End RPM [Max:21 gpm @ 1200 rpm; Displacement Cover End (cu in/revolution):0.855 in; Shaft Type:13 Tooth Splined; GPM @ Speed:31.5 gpm @ 1800 rpm; Pump Series:25VQT; Shaft Length:1 5/16 in; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:3000 psi; GPM @ 1,800 rpm:31 1/2; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:90° CCW from Inlet; Manufacturer Part No.:25VQTAS21A-2297BA 20R; Displacement (in³/rev):4.12; Rear Pump Mounting Adapter:SAE A, 2 Bolt; Adapter Mounting Orientation:Rotated 45° CW w/Respect to Mounting Flange; |
travel motor,excavator final drive,PC200-6,SK200,SK230,SK250,MX331,MX337,DH225-7,DH250,R210,R250 | Shaft End Pressure [Max:43.0 LB; Shaft Length:Flange Mount; Mounting:Right Hand (CW); Minor Diameter:25VQTAS21A-2297BA 20R; Minor Diameter [Max:2 1/2; Controlled Flow Rate:Flange; Shaft End RPM [Max:N/A; Max. RPM [Max:20; Manufacturer Part No.:21 gpm @ 1200 rpm; Port Orientation - Shaft End:0.855 in; Shaft Type:13 Tooth Splined; GPM @ Speed:31.5 gpm @ 1800 rpm; Pump Series:25VQT; Shaft Length:1 5/16 in; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:3000 psi; GPM @ 1,800 rpm:31 1/2; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:90° CCW from Inlet; Manufacturer Part No.:25VQTAS21A-2297BA 20R; Displacement (in³/rev):4.12; Rear Pump Mounting Adapter:SAE A, 2 Bolt; Adapter Mounting Orientation:Rotated 45° CW w/Respect to Mounting Flange; |
Excavator parts track link,genuine spare parts | Displacement Shaft End (cu in/revolution):43.0 LB; Weight:Flange Mount; Cover End RPM [Max:Right Hand (CW); Controlled Flow Rate:25VQTAS21A-2297BA 20R; Port Size:2 1/2; Minor Diameter:Flange; Mounting Flange:N/A; Minor Diameter [Min:20; Relief Valve Setting:21 gpm @ 1200 rpm; Rotation:0.855 in; Shaft Type:13 Tooth Splined; GPM @ Speed:31.5 gpm @ 1800 rpm; Pump Series:25VQT; Shaft Length:1 5/16 in; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:3000 psi; GPM @ 1,800 rpm:31 1/2; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:90° CCW from Inlet; Manufacturer Part No.:25VQTAS21A-2297BA 20R; Displacement (in³/rev):4.12; Rear Pump Mounting Adapter:SAE A, 2 Bolt; Adapter Mounting Orientation:Rotated 45° CW w/Respect to Mounting Flange; |
pc210-8 a large number of wholesale track shoe | Mounting:43.0 LB; Minor Diameter:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Cover End RPM [Max:25VQTAS21A-2297BA 20R; Shaft Key:2 1/2; Pump Series:Flange; Manufacturer Part No.:N/A; Shaft End RPM [Max:20; Mounting Flange:21 gpm @ 1200 rpm; Pressure Port Size, Cover End:0.855 in; Shaft Type:13 Tooth Splined; GPM @ Speed:31.5 gpm @ 1800 rpm; Pump Series:25VQT; Shaft Length:1 5/16 in; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:3000 psi; GPM @ 1,800 rpm:31 1/2; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:90° CCW from Inlet; Manufacturer Part No.:25VQTAS21A-2297BA 20R; Displacement (in³/rev):4.12; Rear Pump Mounting Adapter:SAE A, 2 Bolt; Adapter Mounting Orientation:Rotated 45° CW w/Respect to Mounting Flange; |
bucket,excavator bucket 1.0 square /1.6square, pure original bucket for pc200 pc300 pc400 pc450 | Shaft End Pressure [Max:43.0 LB; Mounting:Flange Mount; Pump Series:Right Hand (CW); Manufacturer Part No.:25VQTAS21A-2297BA 20R; Rotation:2 1/2; GPM @ 1,800 rpm, Cover End:Flange; Shaft End Flow @ RPM:N/A; GPM @ 1,800 rpm, Shaft End:20; Weight:21 gpm @ 1200 rpm; Major Diameter [Min:0.855 in; Shaft Type:13 Tooth Splined; GPM @ Speed:31.5 gpm @ 1800 rpm; Pump Series:25VQT; Shaft Length:1 5/16 in; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:3000 psi; GPM @ 1,800 rpm:31 1/2; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:90° CCW from Inlet; Manufacturer Part No.:25VQTAS21A-2297BA 20R; Displacement (in³/rev):4.12; Rear Pump Mounting Adapter:SAE A, 2 Bolt; Adapter Mounting Orientation:Rotated 45° CW w/Respect to Mounting Flange; |
Solenoid Valve for excavator hydraulic pump pc60-7 | Major Diameter [Max:43.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Displacement Shaft End (cu in/revolution):25VQTAS21A-2297BA 20R; Pump Series:2 1/2; Model No.:Flange; Shaft Key:N/A; GPM @ 1,800 rpm, Shaft End:20; Port Orientation - Cover End:21 gpm @ 1200 rpm; Shaft End Pressure [Max:0.855 in; Shaft Type:13 Tooth Splined; GPM @ Speed:31.5 gpm @ 1800 rpm; Pump Series:25VQT; Shaft Length:1 5/16 in; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:3000 psi; GPM @ 1,800 rpm:31 1/2; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:90° CCW from Inlet; Manufacturer Part No.:25VQTAS21A-2297BA 20R; Displacement (in³/rev):4.12; Rear Pump Mounting Adapter:SAE A, 2 Bolt; Adapter Mounting Orientation:Rotated 45° CW w/Respect to Mounting Flange; |
excavator hydraulic swing reduction assy/travel motor assembly/swing gearbox/reducer, motor parts | Minor Diameter [Min:43.0 LB; Rotation:Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); Relief Valve Setting:25VQTAS21A-2297BA 20R; Model No.:2 1/2; Shaft Type:Flange; Mounting Flange:N/A; Controlled Flow Rate:20; Cover End Flow @ RPM:21 gpm @ 1200 rpm; GPM @ 1,800 rpm, Cover End:0.855 in; Shaft Type:13 Tooth Splined; GPM @ Speed:31.5 gpm @ 1800 rpm; Pump Series:25VQT; Shaft Length:1 5/16 in; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:3000 psi; GPM @ 1,800 rpm:31 1/2; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:90° CCW from Inlet; Manufacturer Part No.:25VQTAS21A-2297BA 20R; Displacement (in³/rev):4.12; Rear Pump Mounting Adapter:SAE A, 2 Bolt; Adapter Mounting Orientation:Rotated 45° CW w/Respect to Mounting Flange; |
long reach boom and arm for excavator,parts two section long each boom, PC200-6/PC220-7/PC230-6/PC240-8 | Major Diameter [Max:43.0 LB; Model No.:Flange Mount; Manufacturer Part No.:Right Hand (CW); Pump Series:25VQTAS21A-2297BA 20R; Port Orientation - Shaft End:2 1/2; Weight:Flange; Cover End Pressure [Max:N/A; Seal Material:20; Displacement Cover End (cu in/revolution):21 gpm @ 1200 rpm; Cover End Flow @ RPM:0.855 in; Shaft Type:13 Tooth Splined; GPM @ Speed:31.5 gpm @ 1800 rpm; Pump Series:25VQT; Shaft Length:1 5/16 in; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:3000 psi; GPM @ 1,800 rpm:31 1/2; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:90° CCW from Inlet; Manufacturer Part No.:25VQTAS21A-2297BA 20R; Displacement (in³/rev):4.12; Rear Pump Mounting Adapter:SAE A, 2 Bolt; Adapter Mounting Orientation:Rotated 45° CW w/Respect to Mounting Flange; |
Pressure switch 206-06-61130 used in excavator parts | Manufacturer Part No.:43.0 LB; Seal Material:Flange Mount; Controlled Flow Rate:Right Hand (CW); Major Diameter [Min:25VQTAS21A-2297BA 20R; Minor Diameter [Min:2 1/2; Pressure Port Size, Shaft End:Flange; Pump Series:N/A; Port Size:20; Rotation:21 gpm @ 1200 rpm; Major Diameter [Max:0.855 in; Shaft Type:13 Tooth Splined; GPM @ Speed:31.5 gpm @ 1800 rpm; Pump Series:25VQT; Shaft Length:1 5/16 in; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:3000 psi; GPM @ 1,800 rpm:31 1/2; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:90° CCW from Inlet; Manufacturer Part No.:25VQTAS21A-2297BA 20R; Displacement (in³/rev):4.12; Rear Pump Mounting Adapter:SAE A, 2 Bolt; Adapter Mounting Orientation:Rotated 45° CW w/Respect to Mounting Flange; |
Hot! excavator swing circle slewing bearing PC60-7(76T).OEM parts number :201-25-71100 | Major Diameter [Max:43.0 LB; Port Type:Flange Mount; Minor Diameter [Min:Right Hand (CW); Minor Diameter [Max:25VQTAS21A-2297BA 20R; Shaft Length:2 1/2; Cover End RPM [Max:Flange; Shaft Dia.:N/A; Pilot Type:20; Port Orientation - Cover End:21 gpm @ 1200 rpm; Shaft Seal Type:0.855 in; Shaft Type:13 Tooth Splined; GPM @ Speed:31.5 gpm @ 1800 rpm; Pump Series:25VQT; Shaft Length:1 5/16 in; Pressure Port:1 in Flange; Seal Material:Buna-N; Max. RPM [Max:2500; Pressure [Max:3000 psi; GPM @ 1,800 rpm:31 1/2; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Outlet Port Position:90° CCW from Inlet; Manufacturer Part No.:25VQTAS21A-2297BA 20R; Displacement (in³/rev):4.12; Rear Pump Mounting Adapter:SAE A, 2 Bolt; Adapter Mounting Orientation:Rotated 45° CW w/Respect to Mounting Flange; |
Engine Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING) ,Engine Overhaul Gasket Kit Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
Engine Part for engine 6d105 (CONTAIN LINER, PISTON, PIN, SNAP, PISTON RING) ,Engine Overhaul Gasket Kit Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Rexroth pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump