Home>Products>Rexroth pump>DC 24v Diesel Fuel Transfer Pump Kit With Gun DCFD40
DC 24v Diesel Fuel Transfer Pump Kit With Gun DCFD40 MODELS
Need a CAD or 3D Model?
DC 24v Diesel Fuel Transfer Pump Kit With Gun DCFD40
category
Rexroth pump
DC 24v Diesel Fuel Transfer Pump Kit With Gun DCFD40 SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
DC 24v Diesel Fuel Transfer Pump Kit With Gun DCFD40 Systems
- #8 SAE O-Ring Port - Bottom (Top Plugged)
- 2 in 4-Bolt Flange/Code 61
- N/A
- 14 Tooth Splined
- 26 gpm @ 1800 rpm
- 1 in 4-Bolt Flange/Code 61
- Pressure Compensator
- 1.89 in
- Side Port
- Viton
- None
- 26
- SAE C, 4 Bolt
- Q250 Valve Plate, No Case To Inlet Check Valve
- 14 Tooth Splined
- No Auxiliary Mounting Features
- 3.5
- None
- None
- 3625
- 957-1,073 psi
- Standard Displacement
DC 24v Diesel Fuel Transfer Pump Kit With Gun DCFD40 Dimensions
H-beam EJ20 Connecting rod | Controlled Flow Rate:N/A; Shaft End Pressure [Max:N/A; Cover End Flow @ RPM:Piston Pumps; Max. RPM [Max:PVH; Mounting Flange:0.0 LB; Shaft Dia.:Right Hand (CW); Cover End RPM [Max:Flange; GPM @ 1,800 rpm, Shaft End:Variable Displacement Open Circuit; Shaft Key:#8 SAE O-Ring Port - Bottom (Top Plugged); Spline Description:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Cylinder block suitable for Euro II (EVB power) diesel engine | Shaft Type:N/A; Pressure Port Size, Cover End:N/A; Shaft Dia.:Piston Pumps; Model No.:PVH; Displacement Cover End (cu in/revolution):0.0 LB; Seal Material:Right Hand (CW); Shaft End RPM [Max:Flange; Cover End RPM [Max:Variable Displacement Open Circuit; Port Orientation - Shaft End:#8 SAE O-Ring Port - Bottom (Top Plugged); Major Diameter [Max:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Excavator Accumulator for pc200-7, 20Y-970-6450, excavator hydraulic part, Excavator spare parts | Port Orientation - Cover End:N/A; Shaft Length:N/A; Weight:Piston Pumps; Displacement Cover End (cu in/revolution):PVH; Rotation:0.0 LB; Manufacturer Part No.:Right Hand (CW); Shaft End Pressure [Max:Flange; Port Type:Variable Displacement Open Circuit; Minor Diameter:#8 SAE O-Ring Port - Bottom (Top Plugged); Cover End Pressure [Max:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
excavator/bulldozer travel motor assy,EX40,EX60,EX100,EX120,EX200 EX220,EX270,EX300,EX400,EX600,UH043,UH052,UH053,UH07 | Shaft Length:N/A; Pilot Type:N/A; Shaft Key:Piston Pumps; GPM @ 1,800 rpm, Cover End:PVH; Port Size:0.0 LB; Shaft End RPM [Max:Right Hand (CW); Cover End RPM [Max:Flange; Integral Valve Configuration:Variable Displacement Open Circuit; Minor Diameter [Max:#8 SAE O-Ring Port - Bottom (Top Plugged); Pressure Port Size, Cover End:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Cutting Edge blade end bits for grader dozer loader excavator | Relief Valve Setting:N/A; Minor Diameter:N/A; Shaft Type:Piston Pumps; Cover End RPM [Max:PVH; Seal Material:0.0 LB; Mounting:Right Hand (CW); Integral Valve Configuration:Flange; Cover End Pressure [Max:Variable Displacement Open Circuit; Major Diameter [Min:#8 SAE O-Ring Port - Bottom (Top Plugged); Pump Series:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
diesel engine parts turbocharger used for excavator | Max. RPM [Max:N/A; Minor Diameter [Max:N/A; Port Type:Piston Pumps; Displacement Shaft End (cu in/revolution):PVH; Model No.:0.0 LB; Minor Diameter [Min:Right Hand (CW); GPM @ 1,800 rpm, Cover End:Flange; Shaft End RPM [Max:Variable Displacement Open Circuit; Shaft Dia.:#8 SAE O-Ring Port - Bottom (Top Plugged); Pump Series:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
hydraulic parts PC200-7 final drive, 708-8F-00171 excavator parts PC200-7 travel motor | Spline Description:N/A; Port Orientation - Shaft End:N/A; Rotation:Piston Pumps; Shaft End RPM [Max:PVH; Seal Material:0.0 LB; Major Diameter [Min:Right Hand (CW); Shaft Type:Flange; Cover End Pressure [Max:Variable Displacement Open Circuit; Weight:#8 SAE O-Ring Port - Bottom (Top Plugged); Model No.:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Excavator and Bulldozer Track Chain D30 | Port Type:N/A; Minor Diameter:N/A; Shaft Key:Piston Pumps; Port Orientation - Cover End:PVH; Major Diameter [Min:0.0 LB; Integral Valve Configuration:Right Hand (CW); Shaft Seal Type:Flange; Pressure Port Size, Cover End:Variable Displacement Open Circuit; Pump Series:#8 SAE O-Ring Port - Bottom (Top Plugged); Max. RPM [Max:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
Excavator PC300-7 Hydraulic Oil Tank | Pilot Type:N/A; Port Size:N/A; Major Diameter [Max:Piston Pumps; Mounting Flange:PVH; Shaft End RPM [Max:0.0 LB; Shaft End Flow @ RPM:Right Hand (CW); Minor Diameter [Min:Flange; Cover End Pressure [Max:Variable Displacement Open Circuit; Cover End RPM [Max:#8 SAE O-Ring Port - Bottom (Top Plugged); Pressure Port Size, Shaft End:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
pc210-8 a large numbe of wholesale long life Turbocharger | Rotation:N/A; GPM @ 1,800 rpm, Shaft End:N/A; Port Size:Piston Pumps; Spline Description:PVH; Max. RPM [Max:0.0 LB; Minor Diameter:Right Hand (CW); Model No.:Flange; Weight:Variable Displacement Open Circuit; Pressure Port Size, Shaft End:#8 SAE O-Ring Port - Bottom (Top Plugged); Shaft End RPM [Max:2 in 4-Bolt Flange/Code 61; Shaft Dia.:N/A; Shaft Type:14 Tooth Splined; GPM @ Speed:26 gpm @ 1800 rpm; Outlet Port:1 in 4-Bolt Flange/Code 61; Control Type:Pressure Compensator; Shaft Length:1.89 in; Port Location:Side Port; Seal Material:Viton; Torque Setting:None; GPM @ 1,800 rpm:26; Mounting Flange:SAE C, 4 Bolt; Special Features:Q250 Valve Plate, No Case To Inlet Check Valve; Shaft Description:14 Tooth Splined; Auxiliary Mounting Pad:No Auxiliary Mounting Features; Displacement (in³/rev):3.5; Control Special Features:None; Flow Compensator Setting:None; Continuous Pressure [Max:3625; Pressure Compensator Setting:957-1,073 psi; Maximum Displacement Adjustment:Standard Displacement; |
DC 24v Diesel Fuel Transfer Pump Kit With Gun DCFD40 Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
DC 24v Diesel Fuel Transfer Pump Kit With Gun DCFD40 Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Rexroth pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump