Home>Products>Rexroth pump>excavator PC200LC, air conditioner compressor, excavator cooling system
excavator PC200LC, air conditioner compressor, excavator cooling system MODELS
Need a CAD or 3D Model?
excavator PC200LC, air conditioner compressor, excavator cooling system
category
Rexroth pump
excavator PC200LC, air conditioner compressor, excavator cooling system SPECIFICATIONS
- Negotiation
- Negotiation
- Sunny2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
excavator PC200LC, air conditioner compressor, excavator cooling system Systems
- 0.875 in
- Straight w/ Key
- V2020
- 2 5/16 in
- Buna-N
- 2500
- N/A
- SAE B, 2 Bolt
- Single Shaft Seal
- N/A
- 2500
- 2500
- N/A
- 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm
- N/A
- N/A
- N/A
- N/A
- N/A
- 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
- V2020-1F11S7S-1DB30-LH
- 2500
- 2500
- 10.5
- 16.5
- N/A
- Outlet 90° CCW from Inlet
- Outlet 90° CW from Inlet
- 3/4 in SAE O-Ring
- 3/4 in SAE O-Ring
- 1.39
- 2.22
excavator PC200LC, air conditioner compressor, excavator cooling system Dimensions
gasket kit for excavator engine S6D102E 6731-11-9980 6735-01-1210 | Major Diameter [Min:35.0 LB; Shaft End RPM [Max:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Port Orientation - Cover End:V2020-1F11S7S-1DB30-LH; Displacement Shaft End (cu in/revolution):2; Cover End RPM [Max:Flange; Shaft End Pressure [Max:3/16 in; Manufacturer Part No.:N/A; Max. RPM [Max:0.875 in; Minor Diameter [Min:Straight w/ Key; Pump Series:V2020; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S7S-1DB30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.22; |
rear latter pump housing of excavator construction machinery parts | Port Orientation - Cover End:35.0 LB; Manufacturer Part No.:Flange Mount; Mounting Flange:Left Hand (CCW); Mounting:V2020-1F11S7S-1DB30-LH; Pressure Port Size, Cover End:2; Shaft End Pressure [Max:Flange; GPM @ 1,800 rpm, Shaft End:3/16 in; Port Size:N/A; Major Diameter [Min:0.875 in; Seal Material:Straight w/ Key; Pump Series:V2020; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S7S-1DB30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.22; |
SD22 bulldozer oil filter,3313279,filter element | Pilot Type:35.0 LB; Cover End RPM [Max:Flange Mount; Shaft End RPM [Max:Left Hand (CCW); Shaft End Pressure [Max:V2020-1F11S7S-1DB30-LH; Port Orientation - Shaft End:2; Mounting Flange:Flange; Mounting:3/16 in; Minor Diameter [Max:N/A; Pump Series:0.875 in; Model No.:Straight w/ Key; Pump Series:V2020; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S7S-1DB30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.22; |
excavator PC400-7 air conditioner compressor 20Y-979-6121, original parts | Max. RPM [Max:35.0 LB; Pressure Port Size, Shaft End:Flange Mount; Relief Valve Setting:Left Hand (CCW); Shaft Type:V2020-1F11S7S-1DB30-LH; Shaft Length:2; Model No.:Flange; Mounting Flange:3/16 in; Seal Material:N/A; Major Diameter [Max:0.875 in; Displacement Shaft End (cu in/revolution):Straight w/ Key; Pump Series:V2020; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S7S-1DB30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.22; |
Excavator Pressure Switch WA-380-3 421-43-26122 excavator spare parts | Displacement Cover End (cu in/revolution):35.0 LB; Minor Diameter:Flange Mount; Model No.:Left Hand (CCW); Shaft Dia.:V2020-1F11S7S-1DB30-LH; Mounting Flange:2; Displacement Shaft End (cu in/revolution):Flange; Major Diameter [Min:3/16 in; Relief Valve Setting:N/A; Rotation:0.875 in; Major Diameter [Max:Straight w/ Key; Pump Series:V2020; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S7S-1DB30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.22; |
Excavator/Bulldozer Track Roller PC120 carrier roller | Pressure Port Size, Shaft End:35.0 LB; Shaft End Flow @ RPM:Flange Mount; Model No.:Left Hand (CCW); Shaft Key:V2020-1F11S7S-1DB30-LH; Port Orientation - Shaft End:2; Shaft Seal Type:Flange; GPM @ 1,800 rpm, Cover End:3/16 in; Pressure Port Size, Cover End:N/A; Integral Valve Configuration:0.875 in; Seal Material:Straight w/ Key; Pump Series:V2020; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S7S-1DB30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.22; |
Motor Driven Hydraulic Pump HHB-630A | Max. RPM [Max:35.0 LB; Minor Diameter [Max:Flange Mount; Rotation:Left Hand (CCW); Manufacturer Part No.:V2020-1F11S7S-1DB30-LH; Port Orientation - Cover End:2; GPM @ 1,800 rpm, Cover End:Flange; Major Diameter [Max:3/16 in; Port Orientation - Shaft End:N/A; Cover End Flow @ RPM:0.875 in; Shaft Key:Straight w/ Key; Pump Series:V2020; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S7S-1DB30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.22; |
PC200-5 PC220-5 PC300-5 PC400-5 Excavator Pressure Switch 20Y-06-15190 | GPM @ 1,800 rpm, Shaft End:35.0 LB; Pilot Type:Flange Mount; Minor Diameter [Min:Left Hand (CCW); Port Type:V2020-1F11S7S-1DB30-LH; Displacement Shaft End (cu in/revolution):2; Shaft Dia.:Flange; Manufacturer Part No.:3/16 in; Pressure Port Size, Shaft End:N/A; Spline Description:0.875 in; Relief Valve Setting:Straight w/ Key; Pump Series:V2020; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S7S-1DB30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.22; |
excavator spare parts pc200-7 travel motor ex120 travel motor | Max. RPM [Max:35.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Minor Diameter [Min:Left Hand (CCW); Shaft End RPM [Max:V2020-1F11S7S-1DB30-LH; Shaft Type:2; Integral Valve Configuration:Flange; Shaft Dia.:3/16 in; Mounting:N/A; Port Orientation - Shaft End:0.875 in; Shaft Length:Straight w/ Key; Pump Series:V2020; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S7S-1DB30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.22; |
IDLER STRAIN SPRING ASSY pc220-8/recoil spring assy/recoil device/track adjuster | Max. RPM [Max:35.0 LB; Spline Description:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Model No.:V2020-1F11S7S-1DB30-LH; Major Diameter [Max:2; GPM @ 1,800 rpm, Cover End:Flange; Integral Valve Configuration:3/16 in; Minor Diameter:N/A; Shaft Dia.:0.875 in; Mounting:Straight w/ Key; Pump Series:V2020; Shaft Length:2 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2020-1F11S7S-1DB30-LH; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:16.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 90° CCW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.39; Displacement Shaft End (cu in/revolution):2.22; |
excavator PC200LC, air conditioner compressor, excavator cooling system Video
hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair
Contact Us
- TOKIMEC VANE PUMP LTD
- Emailsales3@boya.com.sg
- AddressBeiyuan District, Jinan,Shandong
- Phone(Working Time)0531-8299 9953
- Fax0531 -82990352
excavator PC200LC, air conditioner compressor, excavator cooling system Technical Articles
Ceramic Bearing Classification and advantages Reference |
NSK high speed precision bearing installation attention reference |
YCB arc Gear Pump |
Rexroth pump CATEGORIES
- Hydraulic pump and pump parts
- Relief valve and other valve
- excavator
- Excavator spare parts
- Engine and engine parts
- Rexroth pump
- Kawasaki pump
- excavator pump
- Hitachi hydraulic pump
- Excavator Hydraulic
- Excavator Undercarriage parts
- Vickers vane pumps
- VICKERS Piston pump
- Denison vane pump
- Tokimec Vane Pump
- Kayaba Gear Pump
- Shimadzu Gear Pump
- Dansion PV series pump
- Dansion PVT series pump
- Dansion worldcup series pump
- Dansion goldcup series pump
- NACHI IPH series of gear pump
- DANSION vane pump
- NACHI VDC series of Vane pump
- NACHI VDR series of Vane pump
- NACHI PZ series of Piston pump
- NACHI PVS series of Piston pump
- TOKIME VANE PUMP
- Vickers vane pump
- TOKIME variable displacement piston pumps
- YUKEN plunger pump
- YUKEN vane pump
- DAIKIN piston pump
- DAIKIN vane pump
- DAIKIN Rotor pump
- SWEDEN SKF Cylindrical Roller Bearings
- TAIWAN FURNAN PUMP
- Main pump
- Original hydraulic pump
- HYDRAULIC PISTON PUMP
- Original Pump
- Hydraulic Pump
- Denison Vane Pumps
- High Pressure Vane Pump
- Hydraulic Gear Pump
- Hydraulic Piston Pump
- Hydraulic Vane Motor
- Hydraulic Vane Pump
- Industrial Vane Pump
- Tokimec Vane Pump
- Vickers Vane Pump
- Yuken Vane Pump