• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60

  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60
  • 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60

4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60

category

excavator

4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60 Technical information

  • 1 in Code 61
  • 1.25 in
  • 1 1/4 in Code 61
  • 3525V
  • 2 7/8 in
  • Double
  • Buna-N
  • 1800
  • N/A
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 4.9
  • Motor
  • 1800
  • 1800
  • N/A
  • 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
  • 3525V25A12-1CC22L
  • 4 Bolt Flange Per SAE J518C W/ English Threads
  • 2500
  • 2500
  • 18
  • 37.5
  • 45° CW From Inlet Port
  • N/A
  • Outlet 45° CW from Inlet

4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60 Products and services

 

Hydraulic Main Pump For Hitachi Excavator ZX120 and Spare PartsCover End Flow @ RPM:76.0 LB; Seal Material:Flange Mount; Shaft Length:Left Hand (CCW); Displacement Cover End (cu in/revolution):3525V25A12-1CC22L; Shaft End RPM [Max:3; Pump Series:Flange; Minor Diameter:5/16 in; Pressure Port Size, Shaft End:22; Weight:Standard Pilot; Shaft Type:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3525V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-1CC22L; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
Oil radiator SK260LC-8 water radiator for kobelco excavator partsMajor Diameter [Min:76.0 LB; Model No.:Flange Mount; Minor Diameter [Min:Left Hand (CCW); GPM @ 1,800 rpm, Cover End:3525V25A12-1CC22L; Shaft Length:3; GPM @ 1,800 rpm, Shaft End:Flange; Relief Valve Setting:5/16 in; Cover End RPM [Max:22; Mounting Flange:Standard Pilot; Shaft Seal Type:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3525V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-1CC22L; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
For Komatsu Excavator PC300-7 Engine Piston 6743-31-2100 6D114 Engine Parts PC360-7Pump Series:76.0 LB; Shaft End Flow @ RPM:Flange Mount; Model No.:Left Hand (CCW); Major Diameter [Min:3525V25A12-1CC22L; Controlled Flow Rate:3; Minor Diameter [Min:Flange; Cover End RPM [Max:5/16 in; Shaft End RPM [Max:22; Minor Diameter:Standard Pilot; Major Diameter [Max:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3525V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-1CC22L; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
high quality excavator top carrier roller SH220-3 for Sumitomo excavator undercarriage partsDisplacement Shaft End (cu in/revolution):76.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Spline Description:3525V25A12-1CC22L; Pressure Port Size, Cover End:3; Shaft Type:Flange; Mounting:5/16 in; Port Type:22; Major Diameter [Min:Standard Pilot; Shaft Key:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3525V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-1CC22L; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for CAT330DMinor Diameter:76.0 LB; Shaft Type:Flange Mount; Spline Description:Left Hand (CCW); Mounting Flange:3525V25A12-1CC22L; Integral Valve Configuration:3; Shaft Key:Flange; Controlled Flow Rate:5/16 in; Minor Diameter [Min:22; Pressure Port Size, Cover End:Standard Pilot; Rotation:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3525V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-1CC22L; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
For Komatsu Excavator PC200-8 Engine Piston 6754-31-2111 SAA6D107E-1 Engine Parts PC200LC-8 PC220-8 PC240-8Shaft End Flow @ RPM:76.0 LB; Pump Series:Flange Mount; GPM @ 1,800 rpm, Cover End:Left Hand (CCW); Port Size:3525V25A12-1CC22L; Displacement Cover End (cu in/revolution):3; Displacement Shaft End (cu in/revolution):Flange; Pressure Port Size, Shaft End:5/16 in; Spline Description:22; Weight:Standard Pilot; Relief Valve Setting:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3525V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-1CC22L; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
parker pump PV270 piston pump for parkerCover End RPM [Max:76.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Port Type:Left Hand (CCW); Rotation:3525V25A12-1CC22L; Shaft Type:3; GPM @ 1,800 rpm, Shaft End:Flange; Mounting Flange:5/16 in; Cover End Flow @ RPM:22; Mounting:Standard Pilot; Model No.:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3525V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-1CC22L; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
high quality excavator carrier roller R225-9 for Hyundai excavator undercarriage partsMax. RPM [Max:76.0 LB; Mounting Flange:Flange Mount; Shaft Length:Left Hand (CCW); Pressure Port Size, Shaft End:3525V25A12-1CC22L; Minor Diameter [Min:3; GPM @ 1,800 rpm, Shaft End:Flange; Controlled Flow Rate:5/16 in; Shaft Seal Type:22; Port Orientation - Cover End:Standard Pilot; Minor Diameter [Max:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3525V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-1CC22L; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
Oil radiator 908C water radiator for CLG liugong excavator partsShaft Dia.:76.0 LB; Pressure Port Size, Shaft End:Flange Mount; Model No.:Left Hand (CCW); Relief Valve Setting:3525V25A12-1CC22L; Mounting:3; Displacement Cover End (cu in/revolution):Flange; Mounting Flange:5/16 in; Weight:22; Seal Material:Standard Pilot; Pilot Type:1.25 in; Shaft Type:Straight w/ Key; Pump Series:3525V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-1CC22L; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;
6D16 Engine Cylinder Liner Kit Piston Piston Ring for Daewoo Excavator DH170Shaft Seal Type:76.0 LB; Manufacturer Part No.:Flange Mount; Shaft End RPM [Max:Left Hand (CCW); Model No.:3525V25A12-1CC22L; Seal Material:3; Controlled Flow Rate:Flange; Minor Diameter:5/16 in; Port Size:22; Minor Diameter [Max:Standard Pilot; Displacement Shaft End (cu in/revolution):1.25 in; Shaft Type:Straight w/ Key; Pump Series:3525V; Shaft Length:2 7/8 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3525V25A12-1CC22L; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:18; GPM @ 1,800 rpm, Shaft End:37.5; Outlet Port Position [Rear:45° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/4 in Code 61; Displacement Cover End (cu in/revolution):2.5; Displacement Shaft End (cu in/revolution):4.9;

 

 

4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed 4JB1 Engine Cylinder Liner Kit Piston Piston Ring for Sumitomo Excavator SH60 Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us