• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5

  • 6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5
  • 6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5
  • 6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5
  • 6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5
  • 6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5
  • 6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5
  • 6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5
  • 6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5
  • 6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5
  • 6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5

6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5

category

excavator

6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5 Technical information

  • Open Circuit Axial
  • 1800 rpm
  • 11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm
  • 2 in 4-Bolt Flange/Code 61
  • 1 in
  • 1
  • Straight Keyed
  • 20 / 1800
  • 1 in 4-Bolt Flange/Code 61
  • Electric Motor Speeds
  • Pressure & Flow Compensator w/Plugged Orifice
  • 1.5 in
  • Side Port
  • Buna-N
  • 4 in
  • 20
  • SAE B, 2 Bolt
  • 5 3/4 in
  • Adjustable Maximum Displacement Stop & Single Shaft Seal
  • SAE B-B
  • 1900
  • N/A
  • 5000
  • 55 hp
  • PVM045ER06CS02AAC28110000A0A
  • Single Pump, Non-Thru-Drive
  • 2.75
  • 163
  • 11 Bar
  • 5000 psi
  • 4000
  • 4600
  • 280 Bar

6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5 Products and services

 

Oil radiator 925D water radiator for CLG liugong excavator partsDisplacement Cover End (cu in/revolution):1/4 in; Pressure Port Size, Cover End:Standard Blue Paint; GPM @ 1,800 rpm, Shaft End:Axial Piston Pumps; Shaft Dia.:PVM045; Mounting Flange:52.0 LB; Mounting:Right Hand (CW); Minor Diameter [Min:PVM045ER06CS02AAC28110000A0A; Seal Material:Flange Ports; Minor Diameter:Open Circuit Axial; Cover End Flow @ RPM:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1 in; Shaft Size:1; Shaft Type:Straight Keyed; GPM @ Speed:20 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1.5 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B-B; Input Torque [Max:1900; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER06CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
6D114 Engine Cartridge 6742-01-4540 for Komatsu Excavator PC300-7 PC360-7Manufacturer Part No.:1/4 in; Max. RPM [Max:Standard Blue Paint; Cover End RPM [Max:Axial Piston Pumps; Port Orientation - Shaft End:PVM045; Shaft Key:52.0 LB; Mounting:Right Hand (CW); Major Diameter [Min:PVM045ER06CS02AAC28110000A0A; Port Orientation - Cover End:Flange Ports; Port Size:Open Circuit Axial; Spline Description:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1 in; Shaft Size:1; Shaft Type:Straight Keyed; GPM @ Speed:20 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1.5 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B-B; Input Torque [Max:1900; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER06CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
high quality excavator upper roller SK135 for Kobelco excavator undercarriage partsPort Orientation - Shaft End:1/4 in; Minor Diameter [Min:Standard Blue Paint; Max. RPM [Max:Axial Piston Pumps; Port Orientation - Cover End:PVM045; Shaft Length:52.0 LB; Shaft End RPM [Max:Right Hand (CW); Cover End RPM [Max:PVM045ER06CS02AAC28110000A0A; Major Diameter [Min:Flange Ports; Port Type:Open Circuit Axial; Rotation:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1 in; Shaft Size:1; Shaft Type:Straight Keyed; GPM @ Speed:20 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1.5 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B-B; Input Torque [Max:1900; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER06CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
Top Quality D85 D135 Engine Alternator 600-821-7310 S6D140 Engine PartsShaft Key:1/4 in; Rotation:Standard Blue Paint; Model No.:Axial Piston Pumps; Port Size:PVM045; Spline Description:52.0 LB; Displacement Shaft End (cu in/revolution):Right Hand (CW); Integral Valve Configuration:PVM045ER06CS02AAC28110000A0A; Weight:Flange Ports; Cover End Pressure [Max:Open Circuit Axial; Port Orientation - Cover End:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1 in; Shaft Size:1; Shaft Type:Straight Keyed; GPM @ Speed:20 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1.5 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B-B; Input Torque [Max:1900; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER06CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
S6D125 Oil Pump 6151-51-1004 for Komatsu Excavator PC300-6 PC300-7 PC300-8 PC400-6 PC400-7 PC400-8Spline Description:1/4 in; Pressure Port Size, Cover End:Standard Blue Paint; Minor Diameter:Axial Piston Pumps; Cover End Pressure [Max:PVM045; GPM @ 1,800 rpm, Cover End:52.0 LB; Minor Diameter [Max:Right Hand (CW); Shaft End Flow @ RPM:PVM045ER06CS02AAC28110000A0A; Port Size:Flange Ports; Port Orientation - Shaft End:Open Circuit Axial; Pressure Port Size, Shaft End:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1 in; Shaft Size:1; Shaft Type:Straight Keyed; GPM @ Speed:20 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1.5 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B-B; Input Torque [Max:1900; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER06CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Hyundai R450-7Weight:1/4 in; GPM @ 1,800 rpm, Shaft End:Standard Blue Paint; Port Orientation - Cover End:Axial Piston Pumps; Major Diameter [Min:PVM045; Seal Material:52.0 LB; Port Type:Right Hand (CW); Spline Description:PVM045ER06CS02AAC28110000A0A; Cover End RPM [Max:Flange Ports; Pressure Port Size, Cover End:Open Circuit Axial; Displacement Cover End (cu in/revolution):1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1 in; Shaft Size:1; Shaft Type:Straight Keyed; GPM @ Speed:20 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1.5 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B-B; Input Torque [Max:1900; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER06CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
Oil radiator SH800LHD-5 water radiator for sumitomo excavator partsPressure Port Size, Shaft End:1/4 in; Port Size:Standard Blue Paint; Manufacturer Part No.:Axial Piston Pumps; Port Orientation - Cover End:PVM045; Shaft End Flow @ RPM:52.0 LB; Pressure Port Size, Cover End:Right Hand (CW); Displacement Shaft End (cu in/revolution):PVM045ER06CS02AAC28110000A0A; Cover End Pressure [Max:Flange Ports; Relief Valve Setting:Open Circuit Axial; Integral Valve Configuration:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1 in; Shaft Size:1; Shaft Type:Straight Keyed; GPM @ Speed:20 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1.5 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B-B; Input Torque [Max:1900; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER06CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
QSC Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R335LC-9Pump Series:1/4 in; Mounting:Standard Blue Paint; Pressure Port Size, Cover End:Axial Piston Pumps; Port Type:PVM045; Model No.:52.0 LB; Shaft Length:Right Hand (CW); Cover End RPM [Max:PVM045ER06CS02AAC28110000A0A; Shaft End RPM [Max:Flange Ports; Displacement Shaft End (cu in/revolution):Open Circuit Axial; Shaft End Flow @ RPM:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1 in; Shaft Size:1; Shaft Type:Straight Keyed; GPM @ Speed:20 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1.5 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B-B; Input Torque [Max:1900; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER06CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
For Komatsu Excavator PC200-8 Engine Cylinder Head Gasket 6162-13-1812 SAA6D107E-1 Engine Parts PC200LC-8 PC220-8 PC240-8Minor Diameter:1/4 in; Relief Valve Setting:Standard Blue Paint; Shaft Dia.:Axial Piston Pumps; Spline Description:PVM045; Rotation:52.0 LB; Shaft Type:Right Hand (CW); GPM @ 1,800 rpm, Cover End:PVM045ER06CS02AAC28110000A0A; Displacement Shaft End (cu in/revolution):Flange Ports; Pump Series:Open Circuit Axial; Controlled Flow Rate:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1 in; Shaft Size:1; Shaft Type:Straight Keyed; GPM @ Speed:20 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1.5 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B-B; Input Torque [Max:1900; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER06CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;
Hydraulic Main Pump For Hitachi Excavator EX230-5 and Spare PartsCover End RPM [Max:1/4 in; Shaft Key:Standard Blue Paint; Shaft End RPM [Max:Axial Piston Pumps; GPM @ 1,800 rpm, Shaft End:PVM045; Seal Material:52.0 LB; Spline Description:Right Hand (CW); Max. RPM [Max:PVM045ER06CS02AAC28110000A0A; Mounting:Flange Ports; Mounting Flange:Open Circuit Axial; Minor Diameter [Max:1800 rpm; Flow @ RPM:11 gpm @ 1000 rpm, 13 gpm @ 1200 rpm, 17 gpm @ 1500 rpm, 20 gpm @ 1800 rpm; Inlet Port:2 in 4-Bolt Flange/Code 61; Shaft Dia.:1 in; Shaft Size:1; Shaft Type:Straight Keyed; GPM @ Speed:20 / 1800; Outlet Port:1 in 4-Bolt Flange/Code 61; Valve Plate:Electric Motor Speeds; Control Type:Pressure & Flow Compensator w/Plugged Orifice; Shaft Length:1.5 in; Port Location:Side Port; Seal Material:Buna-N; Pilot Diameter:4 in; GPM @ 1,800 rpm:20; Mounting Flange:SAE B, 2 Bolt; Bolt Circle Dia.:5 3/4 in; Special Features:Adjustable Maximum Displacement Stop & Single Shaft Seal; Shaft Description:SAE B-B; Input Torque [Max:1900; Spline Description:N/A; Peak Pressure [Max:5000; HP @ 1,800 rpm [Max:55 hp; Manufacturer Part No.:PVM045ER06CS02AAC28110000A0A; Auxiliary Mounting Pad:Single Pump, Non-Thru-Drive; Displacement (in³/rev):2.75; Torque @ 3000 psi [Max:163; Flow Compensator Setting:11 Bar; Operating Pressure [Max:5000 psi; Continuous Pressure [Max:4000; Intermittent Pressure [Max:4600; Pressure Compensator Setting:280 Bar;

 

 

6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed 6BT5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R220-5 Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us