• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7

  • D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7
  • D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7
  • D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7
  • D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7
  • D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7
  • D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7
  • D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7
  • D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7
  • D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7
  • D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7

D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7

category

excavator

D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7 Technical information

  • 1.09 in
  • 13 Tooth Splined
  • 2520V
  • 1 3/4 in
  • Buna-N
  • 1800
  • 0.7285 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 1800
  • 1800
  • N/A
  • 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • 0.734 in
  • 0.723 in
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 2520V21A14-11CB22R
  • 3000
  • 2500
  • 21
  • 31.5
  • N/A
  • Outlet 45° CCW from Inlet
  • Outlet Inline w/Inlet
  • 3/4 in Code 61
  • 1 in Code 61
  • 2.8
  • 4.1

D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7 Products and services

 

high quality cheap hydraulic cylinder EX200LC-3 for Hitachi manufacturerMajor Diameter [Max:45.0 LB; Controlled Flow Rate:Flange Mount; Cover End RPM [Max:Right Hand (CW); Cover End Flow @ RPM:2520V21A14-11CB22R; Spline Description:2 1/2; Shaft End Pressure [Max:Flange; Shaft Type:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Shaft End Flow @ RPM:1.09 in; Shaft Key:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
high quality excavator carrier upper roller SK07 for Kobelco excavator undercarriage partsManufacturer Part No.:45.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Shaft Dia.:Right Hand (CW); Pilot Type:2520V21A14-11CB22R; Shaft Type:2 1/2; Model No.:Flange; Minor Diameter [Max:N/A; Mounting Flange:Standard Pilot; Minor Diameter:1.09 in; Rotation:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
6D31 Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD700-7Displacement Cover End (cu in/revolution):45.0 LB; Shaft Length:Flange Mount; Mounting:Right Hand (CW); Port Type:2520V21A14-11CB22R; GPM @ 1,800 rpm, Cover End:2 1/2; Shaft End Pressure [Max:Flange; Controlled Flow Rate:N/A; Cover End RPM [Max:Standard Pilot; Manufacturer Part No.:1.09 in; Cover End Pressure [Max:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
4BG1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX150Shaft Key:45.0 LB; Shaft End Flow @ RPM:Flange Mount; Port Type:Right Hand (CW); Pressure Port Size, Cover End:2520V21A14-11CB22R; Displacement Shaft End (cu in/revolution):2 1/2; Shaft Dia.:Flange; Minor Diameter [Min:N/A; Major Diameter [Min:Standard Pilot; Port Orientation - Cover End:1.09 in; Shaft Seal Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
D6DEAE2 Engine Cylinder Liner Kit Piston Piston Ring for Volvo Excavator EC210BShaft End Flow @ RPM:45.0 LB; Weight:Flange Mount; Model No.:Right Hand (CW); Shaft Seal Type:2520V21A14-11CB22R; GPM @ 1,800 rpm, Shaft End:2 1/2; GPM @ 1,800 rpm, Cover End:Flange; Major Diameter [Min:N/A; Minor Diameter [Min:Standard Pilot; Cover End Flow @ RPM:1.09 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
Oil radiator HD512 water radiator for Kato excavator partsMajor Diameter [Min:45.0 LB; Pressure Port Size, Shaft End:Flange Mount; Shaft Length:Right Hand (CW); Cover End Pressure [Max:2520V21A14-11CB22R; Controlled Flow Rate:2 1/2; Pilot Type:Flange; Cover End Flow @ RPM:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Manufacturer Part No.:1.09 in; Port Type:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
Oil radiator SK200-8 water radiator for kobelco excavator partsCover End Flow @ RPM:45.0 LB; Max. RPM [Max:Flange Mount; Rotation:Right Hand (CW); Shaft End RPM [Max:2520V21A14-11CB22R; Shaft Seal Type:2 1/2; GPM @ 1,800 rpm, Cover End:Flange; Seal Material:N/A; Mounting:Standard Pilot; Spline Description:1.09 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
high quality excavator top roller SK200-3 for Kobelco excavator undercarriage partsShaft Type:45.0 LB; Controlled Flow Rate:Flange Mount; Major Diameter [Min:Right Hand (CW); Displacement Cover End (cu in/revolution):2520V21A14-11CB22R; GPM @ 1,800 rpm, Shaft End:2 1/2; Weight:Flange; Cover End Pressure [Max:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Shaft Key:1.09 in; Major Diameter [Max:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
SA6D95L Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC200-5Shaft Dia.:45.0 LB; Shaft End Flow @ RPM:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Minor Diameter:2520V21A14-11CB22R; Shaft End Pressure [Max:2 1/2; Integral Valve Configuration:Flange; Shaft End RPM [Max:N/A; Port Orientation - Shaft End:Standard Pilot; Pressure Port Size, Cover End:1.09 in; Relief Valve Setting:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;
6D125 Engine Parts Alternator 600-821-7220 for Komatsu WA470-3Manufacturer Part No.:45.0 LB; Relief Valve Setting:Flange Mount; Major Diameter [Max:Right Hand (CW); Port Type:2520V21A14-11CB22R; Shaft Key:2 1/2; Minor Diameter:Flange; Minor Diameter [Min:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Weight:1.09 in; Port Size:13 Tooth Splined; Pump Series:2520V; Shaft Length:1 3/4 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:0.7285 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.734 in; Minor Diameter [Min:0.723 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520V21A14-11CB22R; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:21; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CCW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:3/4 in Code 61; Pressure Port Size, Shaft End:1 in Code 61; Displacement Cover End (cu in/revolution):2.8; Displacement Shaft End (cu in/revolution):4.1;

 

 

D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed D6BT-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R215-7 Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us