• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE

  • S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE
  • S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE
  • S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE
  • S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE
  • S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE
  • S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE
  • S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE
  • S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE
  • S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE
  • S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE

S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE

category

excavator

S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE Technical information

  • 1.25 in
  • 14 Tooth Splined
  • 3520VQ
  • 1 15/16 in
  • Buna-N
  • 2500
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2500
  • 2500
  • N/A
  • 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm
  • 3520VQ25A5-11AA20
  • 3000
  • 3000
  • 7.5
  • 37.5
  • w/o Integral Valves
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 3/4 in Flange
  • 1 1/4 in Flange
  • 1.1
  • 4.98

S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE Products and services

 

Hydraulic Main Pump For Hitachi Excavator ZX200-1 and Spare PartsWeight:75.0 LB; Spline Description:Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); Manufacturer Part No.:3520VQ25A5-11AA20; Shaft Type:3; Pump Series:Flange; Mounting Flange:N/A; Seal Material:Standard Pilot; Shaft Dia.:1.25 in; Minor Diameter [Min:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A5-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.98;
SA6D108 Engine Parts Alternator 600-821-5991 for Komatsu PC300-5Port Orientation - Shaft End:75.0 LB; Relief Valve Setting:Flange Mount; Minor Diameter:Right Hand (CW); Shaft Seal Type:3520VQ25A5-11AA20; Model No.:3; Shaft End RPM [Max:Flange; Weight:N/A; Displacement Cover End (cu in/revolution):Standard Pilot; Major Diameter [Max:1.25 in; Shaft End Flow @ RPM:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A5-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.98;
Hydraulic Main Pump For Hitachi Excavator ZX130 and Spare PartsShaft Dia.:75.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Shaft Length:Right Hand (CW); Shaft Type:3520VQ25A5-11AA20; Pressure Port Size, Cover End:3; Major Diameter [Min:Flange; Spline Description:N/A; Pilot Type:Standard Pilot; Cover End RPM [Max:1.25 in; Port Orientation - Cover End:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A5-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.98;
Oil radiator R900 water radiator for Liebherr excavator partsPilot Type:75.0 LB; Manufacturer Part No.:Flange Mount; Cover End RPM [Max:Right Hand (CW); Shaft Seal Type:3520VQ25A5-11AA20; Pump Series:3; Rotation:Flange; Model No.:N/A; Port Type:Standard Pilot; Shaft Key:1.25 in; Displacement Shaft End (cu in/revolution):14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A5-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.98;
SAA6D125 Engine Cylinder Head Gasket 6251-11-1810 for Komatsu Excavator PC400-8 PC450-8Port Type:75.0 LB; Minor Diameter:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:3520VQ25A5-11AA20; Shaft End RPM [Max:3; Shaft Type:Flange; Cover End Pressure [Max:N/A; Shaft Key:Standard Pilot; Rotation:1.25 in; Cover End Flow @ RPM:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A5-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.98;
Hydraulic Main Pump For Hitachi Excavator ZX180-3 and Spare PartsMajor Diameter [Min:75.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Pump Series:3520VQ25A5-11AA20; GPM @ 1,800 rpm, Shaft End:3; Pilot Type:Flange; Port Orientation - Cover End:N/A; Cover End RPM [Max:Standard Pilot; Shaft Key:1.25 in; Shaft End Flow @ RPM:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A5-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.98;
Oil radiator SK260LC-8 water radiator for kobelco excavator partsShaft Type:75.0 LB; Shaft Dia.:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Minor Diameter:3520VQ25A5-11AA20; Shaft End RPM [Max:3; Displacement Shaft End (cu in/revolution):Flange; Shaft Seal Type:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Pressure Port Size, Cover End:1.25 in; Model No.:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A5-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.98;
SA6D95L Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC210-5Minor Diameter [Max:75.0 LB; Port Orientation - Cover End:Flange Mount; Mounting:Right Hand (CW); Shaft End Flow @ RPM:3520VQ25A5-11AA20; Model No.:3; Minor Diameter [Min:Flange; Spline Description:N/A; Shaft Length:Standard Pilot; Cover End RPM [Max:1.25 in; Shaft Seal Type:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A5-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.98;
6SD1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX300-5Weight:75.0 LB; Pressure Port Size, Cover End:Flange Mount; Max. RPM [Max:Right Hand (CW); Displacement Shaft End (cu in/revolution):3520VQ25A5-11AA20; GPM @ 1,800 rpm, Shaft End:3; Controlled Flow Rate:Flange; Cover End Flow @ RPM:N/A; Minor Diameter [Max:Standard Pilot; Shaft End Pressure [Max:1.25 in; Shaft End Flow @ RPM:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A5-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.98;
For Komatsu Excavator PC200-8 Engine Filter Ass'Y 6754-71-6400 SAA6D107E-1 Engine Parts PC200LC-8 PC220-8 PC240-8Weight:75.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Port Orientation - Shaft End:3520VQ25A5-11AA20; Cover End RPM [Max:3; Minor Diameter [Max:Flange; Minor Diameter:N/A; Pilot Type:Standard Pilot; Port Size:1.25 in; Shaft Key:14 Tooth Splined; Pump Series:3520VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm; Manufacturer Part No.:3520VQ25A5-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:7.5; GPM @ 1,800 rpm, Shaft End:37.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):1.1; Displacement Shaft End (cu in/revolution):4.98;

 

 

S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed S4F Engine Cylinder Liner Kit Piston Piston Ring for Kato Excavator HD250SE Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us