• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7

  • 4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7
  • 4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7
  • 4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7
  • 4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7
  • 4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7
  • 4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7
  • 4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7
  • 4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7
  • 4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7
  • 4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7

4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7

category

excavator

4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7 Technical information

  • 0.875 in
  • Straight w/ Key
  • V2010
  • 2 5/16 in
  • Double
  • Buna-N
  • 2800
  • N/A
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • N/A
  • 2800
  • 2800
  • N/A
  • 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm
  • N/A
  • N/A
  • N/A
  • N/A
  • N/A
  • 9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm
  • V2010-1F9S7S-1CC12
  • 2000
  • 2500
  • 10.5
  • 13.5
  • N/A
  • 1.8
  • Outlet Inline w/Inlet
  • 1/2 in SAE O-Ring
  • 3/4 in SAE O-Ring
  • 1.4

4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7 Products and services

 

high quality excavator hydraulic arm cylinder R320-7 for hyundai manufacturerMounting Flange:30.0 LB; Shaft End RPM [Max:Flange Mount; Minor Diameter [Min:Right Hand (CW); Shaft Type:V2010-1F9S7S-1CC12; Pressure Port Size, Shaft End:1.5; Relief Valve Setting:Flange; Rotation:3/16 in; Port Orientation - Cover End:N/A; Cover End Pressure [Max:0.875 in; GPM @ 1,800 rpm, Cover End:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
3D95 Starter Motor Starting Motor 600-813-1750 for Komatsu Excavator PC40 PC50Rotation:30.0 LB; Controlled Flow Rate:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Port Type:V2010-1F9S7S-1CC12; Pressure Port Size, Shaft End:1.5; Shaft End RPM [Max:Flange; Shaft Length:3/16 in; Displacement Cover End (cu in/revolution):N/A; Cover End Pressure [Max:0.875 in; GPM @ 1,800 rpm, Shaft End:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
SA6D95L-1C Engine Parts Alternator 600-821-7580 for Komatsu PC200-5 PC200LC-5Shaft Key:30.0 LB; Spline Description:Flange Mount; Port Type:Right Hand (CW); Minor Diameter:V2010-1F9S7S-1CC12; Relief Valve Setting:1.5; Displacement Shaft End (cu in/revolution):Flange; Pump Series:3/16 in; Model No.:N/A; Cover End Pressure [Max:0.875 in; Minor Diameter [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
SAA6D107E-1 Engine Crankshaft 6754-01-1310 for Komatsu Excavator PC200-8 PC200LC-8 PC220-8 PC240-8Shaft Seal Type:30.0 LB; Pilot Type:Flange Mount; Shaft Dia.:Right Hand (CW); Pump Series:V2010-1F9S7S-1CC12; Manufacturer Part No.:1.5; Minor Diameter:Flange; Pressure Port Size, Cover End:3/16 in; Shaft End RPM [Max:N/A; Minor Diameter [Min:0.875 in; Model No.:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
high quality excavator parts hydraulic cylinder SK200-5 for Kobelco manufacturerMajor Diameter [Max:30.0 LB; Port Size:Flange Mount; Cover End RPM [Max:Right Hand (CW); Displacement Cover End (cu in/revolution):V2010-1F9S7S-1CC12; Model No.:1.5; Shaft Seal Type:Flange; Cover End Flow @ RPM:3/16 in; Port Orientation - Shaft End:N/A; Displacement Shaft End (cu in/revolution):0.875 in; Shaft End RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
Top Quality Starter Motor 6D110 Starting Motor 600-813-2681 for PC150-1Shaft Key:30.0 LB; Shaft End Pressure [Max:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Minor Diameter [Max:V2010-1F9S7S-1CC12; Weight:1.5; GPM @ 1,800 rpm, Shaft End:Flange; Shaft End Flow @ RPM:3/16 in; Major Diameter [Min:N/A; Shaft Length:0.875 in; Displacement Shaft End (cu in/revolution):Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
high quality hydraulic piston cylinder ZAX200-3 for Hitachi manufacturerIntegral Valve Configuration:30.0 LB; Cover End Pressure [Max:Flange Mount; Port Size:Right Hand (CW); Port Orientation - Cover End:V2010-1F9S7S-1CC12; GPM @ 1,800 rpm, Cover End:1.5; GPM @ 1,800 rpm, Shaft End:Flange; Max. RPM [Max:3/16 in; Pressure Port Size, Shaft End:N/A; Controlled Flow Rate:0.875 in; Rotation:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
Factory Price Excavator Swing Bearing Slewing Circle Slewing Ring for Kato HD450-7Pressure Port Size, Cover End:30.0 LB; Shaft End Pressure [Max:Flange Mount; Integral Valve Configuration:Right Hand (CW); Minor Diameter [Min:V2010-1F9S7S-1CC12; Shaft End RPM [Max:1.5; Shaft Length:Flange; Max. RPM [Max:3/16 in; Displacement Shaft End (cu in/revolution):N/A; Mounting:0.875 in; Controlled Flow Rate:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
6D114 Engine Cooling Fan 600-635-7870 for Komatsu Excavator PC300-7 PC360-7Cover End Flow @ RPM:30.0 LB; Model No.:Flange Mount; Shaft Seal Type:Right Hand (CW); Controlled Flow Rate:V2010-1F9S7S-1CC12; Spline Description:1.5; Integral Valve Configuration:Flange; Minor Diameter [Max:3/16 in; GPM @ 1,800 rpm, Shaft End:N/A; Pressure Port Size, Shaft End:0.875 in; Relief Valve Setting:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;
4D84 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC40Port Size:30.0 LB; Minor Diameter:Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); Controlled Flow Rate:V2010-1F9S7S-1CC12; Port Type:1.5; GPM @ 1,800 rpm, Shaft End:Flange; Mounting Flange:3/16 in; Spline Description:N/A; Weight:0.875 in; Model No.:Straight w/ Key; Pump Series:V2010; Shaft Length:2 5/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2800; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S7S-1CC12; Cover End Pressure [Max:2000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:10.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.4; Displacement Shaft End (cu in/revolution):1.8;

 

 

4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed 4TNV-98 Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R80-7 Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us