• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3

  • 6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3
  • 6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3
  • 6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3
  • 6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3
  • 6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3
  • 6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3
  • 6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3
  • 6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3
  • 6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3
  • 6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3

6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3

category

excavator

6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3 Technical information

  • 1.25 in
  • 14 Tooth Splined
  • 4525VQ
  • 1 15/16 in
  • Buna-N
  • 2200
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2200
  • 2200
  • N/A
  • 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm
  • 4525VQ60A17-11AA20
  • 3000
  • 2500
  • 25.5
  • 90
  • w/o Integral Valves
  • Outlet 135° CCW from Inlet
  • Outlet Opposite Inlet
  • 1 in Flange
  • 1 1/2 in Flange
  • 3.37
  • 11.8

6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3 Products and services

 

high quality excavator hydraulic cylinder EX60-1 for Hitachi manufacturerMajor Diameter [Max:101.0 LB; Manufacturer Part No.:Flange Mount; Spline Description:Right Hand (CW); Mounting Flange:4525VQ60A17-11AA20; Cover End Flow @ RPM:3 1/2; Port Size:Flange; Shaft Length:N/A; Model No.:Standard Pilot; Port Type:1.25 in; Pump Series:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8;
Hydraulic Main Pump For Hitachi Excavator ZX60 and Spare PartsMinor Diameter:101.0 LB; Relief Valve Setting:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Seal Material:4525VQ60A17-11AA20; Major Diameter [Min:3 1/2; Spline Description:Flange; Displacement Cover End (cu in/revolution):N/A; Shaft Dia.:Standard Pilot; GPM @ 1,800 rpm, Cover End:1.25 in; Pump Series:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8;
For Komatsu Excavator PC200-8 Engine Piston 6754-31-2111 SAA6D107E-1 Engine Parts PC200LC-8 PC220-8 PC240-8Minor Diameter [Min:101.0 LB; Major Diameter [Min:Flange Mount; Port Size:Right Hand (CW); Shaft Type:4525VQ60A17-11AA20; Cover End Pressure [Max:3 1/2; Seal Material:Flange; Pump Series:N/A; Pressure Port Size, Shaft End:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Displacement Shaft End (cu in/revolution):14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8;
SAA6D125 Engine Front Gear Cover 6251-21-3120 for Komatsu Excavator PC400-8 PC450-8Cover End Flow @ RPM:101.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Mounting Flange:Right Hand (CW); Port Type:4525VQ60A17-11AA20; Rotation:3 1/2; Spline Description:Flange; Seal Material:N/A; Pressure Port Size, Shaft End:Standard Pilot; Major Diameter [Min:1.25 in; Port Size:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8;
Oil radiator SH210LC-5 water radiator for sumitomo excavator partsCover End Flow @ RPM:101.0 LB; Major Diameter [Max:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Cover End Pressure [Max:4525VQ60A17-11AA20; Shaft Length:3 1/2; Shaft Key:Flange; Mounting:N/A; Seal Material:Standard Pilot; Controlled Flow Rate:1.25 in; Port Size:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8;
high quality hydraulic piston cylinder PC120-6 manufacturerShaft Type:101.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Port Size:Right Hand (CW); Pressure Port Size, Cover End:4525VQ60A17-11AA20; Pilot Type:3 1/2; Seal Material:Flange; Shaft End Pressure [Max:N/A; Shaft Key:Standard Pilot; Rotation:1.25 in; Shaft End Flow @ RPM:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8;
S6D125 Starter Motor Starting Motor 600-813-8320 for Komatsu Excavator PC400-6Shaft Key:101.0 LB; Seal Material:Flange Mount; Cover End RPM [Max:Right Hand (CW); Spline Description:4525VQ60A17-11AA20; Minor Diameter [Min:3 1/2; Major Diameter [Max:Flange; Displacement Cover End (cu in/revolution):N/A; Port Orientation - Cover End:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Minor Diameter [Max:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8;
Oil radiator DH330 water radiator for DEAWOO DOOSAN excavator partsPressure Port Size, Cover End:101.0 LB; Minor Diameter [Max:Flange Mount; Port Size:Right Hand (CW); Seal Material:4525VQ60A17-11AA20; Shaft End RPM [Max:3 1/2; Shaft Length:Flange; Shaft End Flow @ RPM:N/A; Major Diameter [Max:Standard Pilot; Shaft Seal Type:1.25 in; Minor Diameter [Min:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8;
Oil radiator R335-7 water radiator for Hyundai excavator partsShaft Seal Type:101.0 LB; Mounting:Flange Mount; Seal Material:Right Hand (CW); GPM @ 1,800 rpm, Cover End:4525VQ60A17-11AA20; Minor Diameter [Min:3 1/2; Shaft Dia.:Flange; Minor Diameter:N/A; Manufacturer Part No.:Standard Pilot; Major Diameter [Min:1.25 in; Rotation:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8;
Hydraulic Main Pump For Hitachi Excavator EX280 and Spare PartsCover End RPM [Max:101.0 LB; Shaft Key:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Pump Series:4525VQ60A17-11AA20; Port Size:3 1/2; Controlled Flow Rate:Flange; Rotation:N/A; Mounting Flange:Standard Pilot; Port Orientation - Shaft End:1.25 in; Manufacturer Part No.:14 Tooth Splined; Pump Series:4525VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm; Manufacturer Part No.:4525VQ60A17-11AA20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:90; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):11.8;

 

 

6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed 6RB1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator EX400-3 Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us