• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230

  • 4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230
  • 4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230
  • 4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230
  • 4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230
  • 4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230
  • 4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230
  • 4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230
  • 4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230
  • 4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230
  • 4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230

4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230

category

excavator

4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230 Technical information

  • 0.875 in
  • 13 Tooth Splined
  • 2520VQ
  • 1.375 in
  • Buna-N
  • 2500
  • 0.715 in
  • SAE B, 2 Bolt
  • Single Shaft Seal
  • 16/32
  • 2700
  • 2500
  • N/A
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • N/A
  • N/A
  • N/A
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 2520VQ21A11-11DD20
  • 3000
  • 3000
  • 16.5
  • 31.5
  • w/o Integral Valves
  • Outlet 135° CW from Inlet
  • Outlet 90° CW from Inlet
  • 3/4 in Flange
  • 1 in Flange
  • 2.22
  • 4.12

4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230 Products and services

 

Oil radiator 920D water radiator for CLG liugong excavator partsPort Size:45.0 LB; Port Type:Flange Mount; Major Diameter [Max:Right Hand (CW); GPM @ 1,800 rpm, Cover End:2520VQ21A11-11DD20; Displacement Cover End (cu in/revolution):2 1/2; Shaft Length:Flange; Seal Material:N/A; Relief Valve Setting:Standard Pilot; Mounting:0.875 in; Cover End RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
6D105 Engine Parts Alternator 600-821-6130 for Komatsu PC120-6 PC200-3Major Diameter [Min:45.0 LB; Port Orientation - Cover End:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Shaft End Pressure [Max:2520VQ21A11-11DD20; GPM @ 1,800 rpm, Cover End:2 1/2; Cover End Pressure [Max:Flange; Weight:N/A; Pressure Port Size, Cover End:Standard Pilot; Controlled Flow Rate:0.875 in; Shaft Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
high quality excavator hydraulic cylinder EC290 for Volvo manufacturerMounting Flange:45.0 LB; Rotation:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Shaft Dia.:2520VQ21A11-11DD20; Pressure Port Size, Shaft End:2 1/2; Max. RPM [Max:Flange; Pilot Type:N/A; Cover End Flow @ RPM:Standard Pilot; Shaft End RPM [Max:0.875 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
high quality excavator top carrier roller SH260 for Sumitomo excavator undercarriage partsDisplacement Shaft End (cu in/revolution):45.0 LB; Seal Material:Flange Mount; Shaft Type:Right Hand (CW); Major Diameter [Min:2520VQ21A11-11DD20; Shaft Length:2 1/2; Displacement Cover End (cu in/revolution):Flange; Shaft End Flow @ RPM:N/A; GPM @ 1,800 rpm, Cover End:Standard Pilot; Controlled Flow Rate:0.875 in; Model No.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
Oil radiator 915D water radiator for CLG liugong excavator partsManufacturer Part No.:45.0 LB; Integral Valve Configuration:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Shaft Type:2520VQ21A11-11DD20; GPM @ 1,800 rpm, Shaft End:2 1/2; Major Diameter [Max:Flange; Shaft Key:N/A; Cover End Flow @ RPM:Standard Pilot; Minor Diameter [Min:0.875 in; Port Size:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
B5.9-C Engine Cylinder Liner Kit Piston Piston Ring for Hyundai Excavator R225LC-9Integral Valve Configuration:45.0 LB; Shaft End RPM [Max:Flange Mount; GPM @ 1,800 rpm, Shaft End:Right Hand (CW); Cover End Pressure [Max:2520VQ21A11-11DD20; Pump Series:2 1/2; Shaft Type:Flange; Minor Diameter:N/A; Major Diameter [Max:Standard Pilot; Pilot Type:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
Oil radiator A904C water radiator for Liebherr excavator partsControlled Flow Rate:45.0 LB; Cover End Flow @ RPM:Flange Mount; Shaft Type:Right Hand (CW); Max. RPM [Max:2520VQ21A11-11DD20; Integral Valve Configuration:2 1/2; Major Diameter [Max:Flange; Shaft End Pressure [Max:N/A; Model No.:Standard Pilot; Port Orientation - Cover End:0.875 in; Spline Description:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
Oil radiator DH330 water radiator for DEAWOO DOOSAN excavator partsCover End Pressure [Max:45.0 LB; Shaft Key:Flange Mount; Mounting:Right Hand (CW); Shaft Length:2520VQ21A11-11DD20; Weight:2 1/2; Pilot Type:Flange; Major Diameter [Max:N/A; Major Diameter [Min:Standard Pilot; Manufacturer Part No.:0.875 in; Minor Diameter:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
Oil radiator HD820-1 water radiator for Kato excavator partsShaft Key:45.0 LB; Minor Diameter [Min:Flange Mount; Max. RPM [Max:Right Hand (CW); Model No.:2520VQ21A11-11DD20; Mounting Flange:2 1/2; Port Orientation - Shaft End:Flange; Manufacturer Part No.:N/A; Spline Description:Standard Pilot; Shaft End Pressure [Max:0.875 in; Shaft End Flow @ RPM:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
Top Quality Starter Motor 6D102 6D107 Starting Motor 6738-82-6810 for WA380-6 WA250-6Weight:45.0 LB; Shaft End RPM [Max:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Displacement Shaft End (cu in/revolution):2520VQ21A11-11DD20; GPM @ 1,800 rpm, Shaft End:2 1/2; Controlled Flow Rate:Flange; Shaft Seal Type:N/A; Mounting Flange:Standard Pilot; Seal Material:0.875 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQ21A11-11DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;

 

 

4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed 4HK1 Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX230 ZX230 Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us