• 0531-8299 9953|
  • Request a quote
English
English العربية Deutsch Ελληνικά Español Français Bahasa Indonesia Italiano Português Русский язык Shqip Svenska ไทย Türkçe Українська 中文
TOKIMEC VANE PUMP LTD

TOKIMEC VANE PUMP LTD

 Hydraulic pump and pump parts   Relief valve and other valve   excavator  
  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Home>Products>excavator>4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6

  • 4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6
  • 4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6
  • 4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6
  • 4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6
  • 4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6
  • 4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6
  • 4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6
  • 4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6
  • 4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6
  • 4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6

4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6 MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6

category

excavator

4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6 SPECIFICATIONS

  • Negotiation
  • Negotiation
TOKIMEC VANE PUMP LTD

SunnyChina

  • Sunny2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6 Technical information

  • 1.25 in
  • 14 Tooth Splined
  • 4535VQ
  • 1 15/16 in
  • Buna-N
  • 2200
  • 1.04 in
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • 12/24
  • 2200
  • 2200
  • N/A
  • 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm
  • 1.248 in
  • 1.247 in
  • N/A
  • N/A
  • N/A
  • 50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm
  • 4535VQ50A35-11AA20-LH
  • 3000
  • 2500
  • 52.5
  • 75
  • w/o Integral Valves
  • Outlet Opposite Inlet
  • Outlet Opposite Inlet
  • 1 1/4 in Flange
  • 1 1/2 in Flange
  • 6.88
  • 9.9

4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6 Products and services

 

high quality carrier roller ZX230 for Hitachi excavator undercarriage partsShaft Key:118.0 LB; Seal Material:Flange Mount; Cover End RPM [Max:Left Hand (CCW); Integral Valve Configuration:4535VQ50A35-11AA20-LH; Major Diameter [Max:4; Controlled Flow Rate:Flange; Weight:N/A; Displacement Shaft End (cu in/revolution):Standard Pilot; Shaft End Pressure [Max:1.25 in; Relief Valve Setting:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
For Komatsu Excavator PC200-8 Engine Cover Oil Cooler 6754-61-2220 SAA6D107E-1 Engine Parts PC200LC-8 PC220-8 PC240-8Rotation:118.0 LB; Port Orientation - Shaft End:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Minor Diameter [Max:4535VQ50A35-11AA20-LH; Pump Series:4; Port Orientation - Cover End:Flange; Pressure Port Size, Cover End:N/A; Pilot Type:Standard Pilot; Max. RPM [Max:1.25 in; Shaft Length:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
high quality excavator carrier upper roller EX60-5 for Hitachi excavator undercarriage partsPort Size:118.0 LB; Rotation:Flange Mount; Minor Diameter [Max:Left Hand (CCW); Minor Diameter:4535VQ50A35-11AA20-LH; Pilot Type:4; Shaft Seal Type:Flange; Cover End Pressure [Max:N/A; Spline Description:Standard Pilot; Port Orientation - Shaft End:1.25 in; GPM @ 1,800 rpm, Shaft End:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
WA300-1 Engine Parts Water Pump 6136-61-1501 for Komatsu MachineCover End RPM [Max:118.0 LB; Seal Material:Flange Mount; Port Type:Left Hand (CCW); Displacement Shaft End (cu in/revolution):4535VQ50A35-11AA20-LH; Cover End Flow @ RPM:4; Cover End Pressure [Max:Flange; Pressure Port Size, Cover End:N/A; Shaft End Pressure [Max:Standard Pilot; Integral Valve Configuration:1.25 in; Manufacturer Part No.:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
high quality carrier roller SK60-5 for Kobelco excavator undercarriage partsPort Size:118.0 LB; Cover End Pressure [Max:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Shaft Dia.:4535VQ50A35-11AA20-LH; Model No.:4; Minor Diameter [Max:Flange; Seal Material:N/A; Shaft Key:Standard Pilot; Shaft Length:1.25 in; Minor Diameter:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
high quality 20 ton hydraulic cylinder R200 for hyundai manufacturerShaft Seal Type:118.0 LB; Shaft End RPM [Max:Flange Mount; Minor Diameter [Max:Left Hand (CCW); Port Orientation - Cover End:4535VQ50A35-11AA20-LH; Cover End RPM [Max:4; Relief Valve Setting:Flange; Port Orientation - Shaft End:N/A; Spline Description:Standard Pilot; Pump Series:1.25 in; Minor Diameter [Min:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
Hydraulic Main Pump For Hitachi Excavator EX60WD-2 and Spare PartsRotation:118.0 LB; Manufacturer Part No.:Flange Mount; Displacement Cover End (cu in/revolution):Left Hand (CCW); Model No.:4535VQ50A35-11AA20-LH; Mounting:4; Shaft Length:Flange; Displacement Shaft End (cu in/revolution):N/A; Minor Diameter:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Pilot Type:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
high quality excavator hydraulic cylinder SH220-3 for Volvo manufacturerModel No.:118.0 LB; Port Size:Flange Mount; Cover End Flow @ RPM:Left Hand (CCW); Shaft Seal Type:4535VQ50A35-11AA20-LH; Minor Diameter:4; Shaft End Pressure [Max:Flange; Port Orientation - Shaft End:N/A; Weight:Standard Pilot; Displacement Cover End (cu in/revolution):1.25 in; Minor Diameter [Max:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
SAA6D125E-5 Engine Cylinder Liner Kit Piston Piston Ring for Komatsu Excavator PC400-8Cover End Pressure [Max:118.0 LB; Cover End Flow @ RPM:Flange Mount; Pump Series:Left Hand (CCW); Manufacturer Part No.:4535VQ50A35-11AA20-LH; Shaft End Pressure [Max:4; Port Orientation - Cover End:Flange; Shaft End RPM [Max:N/A; Seal Material:Standard Pilot; Minor Diameter [Max:1.25 in; Mounting:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;
Oil radiator WA500-6 water radiator for komatsvu excavator partsShaft End RPM [Max:118.0 LB; Shaft End Flow @ RPM:Flange Mount; Rotation:Left Hand (CCW); Controlled Flow Rate:4535VQ50A35-11AA20-LH; Displacement Cover End (cu in/revolution):4; GPM @ 1,800 rpm, Shaft End:Flange; GPM @ 1,800 rpm, Cover End:N/A; Max. RPM [Max:Standard Pilot; Pressure Port Size, Cover End:1.25 in; Cover End RPM [Max:14 Tooth Splined; Pump Series:4535VQ; Shaft Length:1 15/16 in; Seal Material:Buna-N; Max. RPM [Max:2200; Minor Diameter:1.04 in; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:12/24; Cover End RPM [Max:2200; Shaft End RPM [Max:2200; Controlled Flow Rate:N/A; Cover End Flow @ RPM:35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm; Major Diameter [Max:1.248 in; Major Diameter [Min:1.247 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm; Manufacturer Part No.:4535VQ50A35-11AA20-LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:52.5; GPM @ 1,800 rpm, Shaft End:75; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet Opposite Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1 1/4 in Flange; Pressure Port Size, Shaft End:1 1/2 in Flange; Displacement Cover End (cu in/revolution):6.88; Displacement Shaft End (cu in/revolution):9.9;

 

 

4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6 Video

 

hydraulic piston, vickers hydraulics, rexroth hydraulic,hydraulic cylinder repair

Contact Us

TOKIMEC VANE PUMP LTD
Emailsales3@boya.com.sg
AddressBeiyuan District, Jinan，Shandong
Phone(Working Time)0531-8299 9953
Fax0531 -82990352
  • TOKIMEC VANE PUMP LTD
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6 Technical Articles

Ceramic Bearing Classification and advantages Reference
All ceramic bearings are resistant to magnetic and electrical insulation, wear and corrosion resistance, oil-free self-lubricating, high temperature and high temperature resistance, and can be used in extremely harsh environments and special working...
NSK high speed precision bearing installation attention reference
High-speed precision bearings are mainly used for high-speed rotating applications with light loads. High-precision bearings, high-speed, low-temperature vibration and a certain service life are required. The support members of the high-speed electric...
YCB arc Gear Pump
I. Overview and characteristics of YCB arc gear pump: YCB arc gear pump adopts the most advanced point contact gear which is considered to be the most advanced pump in the world, that is, the double arc plus sinusoidal curve is combined into a tooth...

excavator CATEGORIES

  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
  • Excavator spare parts
  • Engine and engine parts
  • Rexroth pump
  • Kawasaki pump
  • excavator pump
  • Hitachi hydraulic pump
  • Excavator Hydraulic
  • Excavator Undercarriage parts
  • Vickers vane pumps
  • VICKERS Piston pump
  • Denison vane pump
  • Tokimec Vane Pump
  • Kayaba Gear Pump
  • Shimadzu Gear Pump
  • Dansion PV series pump
  • Dansion PVT series pump
  • Dansion worldcup series pump
  • Dansion goldcup series pump
  • NACHI IPH series of gear pump
  • DANSION vane pump
  • NACHI VDC series of Vane pump
  • NACHI VDR series of Vane pump
  • NACHI PZ series of Piston pump
  • NACHI PVS series of Piston pump
  • TOKIME VANE PUMP
  • Vickers vane pump
  • TOKIME variable displacement piston pumps
  • YUKEN plunger pump
  • YUKEN vane pump
  • DAIKIN piston pump
  • DAIKIN vane pump
  • DAIKIN Rotor pump
  • SWEDEN SKF Cylindrical Roller Bearings
  • TAIWAN FURNAN PUMP
  • Main pump
  • Original hydraulic pump
  • HYDRAULIC PISTON PUMP
  • Original Pump
  • Hydraulic Pump
  • Denison Vane Pumps
  • High Pressure Vane Pump
  • Hydraulic Gear Pump
  • Hydraulic Piston Pump
  • Hydraulic Vane Motor
  • Hydraulic Vane Pump
  • Industrial Vane Pump
  • Tokimec Vane Pump
  • Vickers Vane Pump
  • Yuken Vane Pump
MORE

Customers Who Viewed 4BG1TC Engine Cylinder Liner Kit Piston Piston Ring for Hitachi Excavator ZAX120-6 ZX120-6 Also Viewed

  • For Komatsu Excavator PC300-7 Engine Alternator 600-861-3111 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cartridge 6742-01-4540 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Oil Pump 6741-51-1110 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Cooling Fan 600-635-7870 6D114 Engine Parts PC360-7
  • For Komatsu Excavator PC300-7 Engine Connecting Rod 1240906H91 6D114 Engine Parts PC360-7
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

TOKIMEC VANE PUMP LTD. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • Hydraulic pump and pump parts
    • Relief valve and other valve
    • excavator
    • Excavator spare parts
    • Engine and engine parts
    • Rexroth pump
    • Kawasaki pump
    • excavator pump
    • Hitachi hydraulic pump
    • Excavator Hydraulic
    • Excavator Undercarriage parts
    • Vickers vane pumps
    • VICKERS Piston pump
    • Denison vane pump
    • Tokimec Vane Pump
    • Kayaba Gear Pump
    • Shimadzu Gear Pump
    • Dansion PV series pump
    • Dansion PVT series pump
    • Dansion worldcup series pump
    • Dansion goldcup series pump
    • NACHI IPH series of gear pump
    • DANSION vane pump
    • NACHI VDC series of Vane pump
    • NACHI VDR series of Vane pump
    • NACHI PZ series of Piston pump
    • NACHI PVS series of Piston pump
    • TOKIME VANE PUMP
    • Vickers vane pump
    • TOKIME variable displacement piston pumps
    • YUKEN plunger pump
    • YUKEN vane pump
    • DAIKIN piston pump
    • DAIKIN vane pump
    • DAIKIN Rotor pump
    • SWEDEN SKF Cylindrical Roller Bearings
    • TAIWAN FURNAN PUMP
    • Main pump
    • Original hydraulic pump
    • HYDRAULIC PISTON PUMP
    • Original Pump
    • Hydraulic Pump
    • Denison Vane Pumps
    • High Pressure Vane Pump
    • Hydraulic Gear Pump
    • Hydraulic Piston Pump
    • Hydraulic Vane Motor
    • Hydraulic Vane Pump
    • Industrial Vane Pump
    • Tokimec Vane Pump
    • Vickers Vane Pump
    • Yuken Vane Pump
  • Quality Control
  • Hydraulic pump and pump parts
  • Relief valve and other valve
  • excavator
✖

Home

Stock Categories

Quality Control

Hydraulic pump and pump parts

Relief valve and other valve

excavator

Contact Us